This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Pau Espin Pedrol gerrit-no-reply at lists.osmocom.orgReview at https://gerrit.osmocom.org/3526 osmo-bts-trx: Enable osmotrx tx-attenuation oml by default There are currently two ways to specify power reductions to be sent to osmo-trx from osmo-bts-trx: * osmotrx tx-attenuation oml * osmotrx tx-attenuation <0-50> None of them is enabled by default, which means if none of them is specified in the config file of osmo-bts-trx, SETPOWER cmd won't be sent to osmo-trx, which in turn won't turn on the transciever. Let's enable osmo tx-attenuation oml by default and leave it up to the bsc to decide which power reduction to use. If the user wants to configure a specific tx-attentuation, it can still do so in exactly the same way he used to do it. Change-Id: Ia8640751630ee37e5f5d1f470bad892a08e80654 --- M src/osmo-bts-trx/main.c 1 file changed, 2 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/26/3526/1 diff --git a/src/osmo-bts-trx/main.c b/src/osmo-bts-trx/main.c index da3dc60..283e549 100644 --- a/src/osmo-bts-trx/main.c +++ b/src/osmo-bts-trx/main.c @@ -130,6 +130,8 @@ l1h = talloc_zero(tall_bts_ctx, struct trx_l1h); l1h->phy_inst = pinst; pinst->u.osmotrx.hdl = l1h; + + l1h->config.power_oml = 1; } int main(int argc, char **argv) -- To view, visit https://gerrit.osmocom.org/3526 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ia8640751630ee37e5f5d1f470bad892a08e80654 Gerrit-PatchSet: 1 Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>