This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. Change subject: add example config for sysmobts ...................................................................... add example config for sysmobts Many years ago, there was no difference between the libbsc support for nanobts and sysmobts. However, this is not the case for a long time anymore, and there are some specifics in OsmoNITB when it comes to sysmobts. Let's have an example config file Change-Id: I94ae57c9a3cb497ca39d56270fa15ed65d7f147e --- A openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg 1 file changed, 77 insertions(+), 0 deletions(-) Approvals: Harald Welte: Looks good to me, approved; Verified Jenkins Builder: Verified diff --git a/openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg b/openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg new file mode 100644 index 0000000..7c078f6 --- /dev/null +++ b/openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg @@ -0,0 +1,77 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + auth policy closed + location updating reject cause 13 + encryption a5 0 + neci 1 + rrlp mode none + mm info 1 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3101 10 + timer t3103 0 + timer t3105 0 + timer t3107 0 + timer t3109 4 + timer t3111 0 + timer t3113 60 + timer t3115 0 + timer t3117 0 + timer t3119 0 + timer t3141 0 + bts 0 + type sysmobts + band DCS1800 + cell_identity 0 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + ip.access unit_id 1801 0 + oml ip.access stream_id 255 line 0 + gprs mode none + trx 0 + rf_locked 0 + arfcn 514 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + timeslot 1 + phys_chan_config SDCCH8 + timeslot 2 + phys_chan_config TCH/F + timeslot 3 + phys_chan_config TCH/F + timeslot 4 + phys_chan_config TCH/F + timeslot 5 + phys_chan_config TCH/F + timeslot 6 + phys_chan_config TCH/F + timeslot 7 + phys_chan_config TCH/F -- To view, visit https://gerrit.osmocom.org/639 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: merged Gerrit-Change-Id: I94ae57c9a3cb497ca39d56270fa15ed65d7f147e Gerrit-PatchSet: 2 Gerrit-Project: openbsc Gerrit-Branch: master Gerrit-Owner: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder