<div dir="ltr">Hi,<br><br>> I setup CalypsoBTS to work with 2 old motorola c123, I know that isn't the<br>> best way to do that, but I would like to have a cheap solution. I got the<br>> setup working with a normal phone and the BTS seems to work correctly<br>> (using jolly/testing), but from my understanding it support only GSM calls<br>> and SMS and GPRS is not implemented into the transceiver. I'm wrong or this<br>> part has not been implemented yet?<br><br>Right, isn't implemented. When you run OsmoBTS, it first does some basic<br>configuration of transceiver, including timeslot type setting. PDCH has<br>its own dedicated type, which is being indicated by the SETSLOT command.<br>So you can look at OsmocomBB sources, and check whether the transceiver<br>handles this type or not.<br><br>> Also, given that CalypsoBTS can only provide single (or two?) timeslot,<br>> there are a long list of reasons why it would not work straight-forward.<br>> But technically also possible to make work.<br><br>With two Calypso phones it becomes possible to serve two timeslots.<br>Basically, second phone serves one TCH timeslot, but (if I am correct)<br>PDCH has no fundamental differences from TCH, so its support could be<br>implemented too.<br><br>After a quick look at OsmoTRX source code, I can assume, that the only<br>difference between TCH channel combinations (I, II and III) and PDCH<br>channel combination (XIII) is a fillerModulus value. Correct me if I am wrong.<br><br clear="all"><div><div><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div>With best regards,<br></div><div>Vadim Yanitskiy.<br></div></div></div></div></div></div>
</div></div>