<html><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:16px"><div>FWIW, someone asked me whether c113 worked. I found a cheap 113a and hello_world loaded pretty well. The screen on my phone is shot but the backlight did come on.</div><div>it works fine with the following command:<br></div><div><br></div><div dir="ltr">craig@craig:~/c115-osmocom-bb/src$ host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor target/firmware/board/compal_e88/hello_world.compalram.bin </div><div dir="ltr"><br style="" class="">OsmocomBB Hello World (revision osmocon_v0.0.0-1754-gfc20a37)<br style="" class="">======================================================================<br style="" class="">Device ID code: 0xb4fb<br style="" class="">Device Version code: 0x0000<br style="" class="">ARM ID code: 0xfff3<br style="" class="">cDSP ID code: 0x0128<br style="" class="">Die ID code: c5c63637a5039778<br style="" class="">======================================================================<br style="" class="">REG_DPLL=0x2413<br style="" class="">CNTL_ARM_CLK=0xf0a1<br style="" class="">CNTL_CLK=0xff91<br style="" class="">CNTL_RST=0xfff3<br style="" class="">CNTL_ARM_DIV=0xfff9<br style="" class="">======================================================================<br style="" class="">REG_DPLL=0x2413<br style="" class="">CNTL_ARM_CLK=0xf0a1<br style="" class="">CNTL_CLK=0xff91<br style="" class="">CNTL_RST=0xfff3<br style="" class="">CNTL_ARM_DIV=0xfff9<br style="" class="">======================================================================<br style="" class="">entering interrupt loop</div></div></body></html>