<div dir="ltr"><div><div><div>Greetings,<br><br></div>I have a Motorola C139 handset with SW Ver 1.9.24 and a CP2102 USB/UART adapter, which I hope(d) to use with osmocom-bb.<br><br></div>In Ubuntu 13.10 (running on [non-virtualized] hardware with an Intel i5-750 CPU), I compiled the toolchain, prerequisites, and osmocom-bb, but when I run the following command (and then briefly press the phone's power button) :<br>
<br><pre class="">./osmocon -p /dev/ttyUSB0 -m c140 ../../target/firmware/board/compal_e86/loader.compalram.bin<br><br></pre>I get the following output: <br></div><br><div class="">got 7 bytes from modem, data looks like: 66 74 6d 74 6f 6f 6c  ftmtool</div>
<div class="">Received FTMTOOL from phone, ramloader has aborted</div><div class="">got 1 bytes from modem, data looks like: 65  e</div><div class="">got 1 bytes from modem, data looks like: 72  r</div><div class="">got 1 bytes from modem, data looks like: 72  r</div>
<div class="">got 1 bytes from modem, data looks like: 6f  o</div><div class="">got 1 bytes from modem, data looks like: 72  r<br><br></div><div class="">If I briefly press the power button repeatedly, I receive similar output. <br>
<br></div><div class="">I would greatly appreciate any suggestions as to how I might be able to coax this into working.<br><br></div><div class="">Thanks,<br>Rusty D<br></div></div>