Dear all,<br>I have successfully made a call from the master branch of Osmocom-bb . After integrating it to wireshark, I am able to see system information 5 and 6 but I am unable to see the measurement reports and voice traffic. Following is what i am able to see when i execute the mobile application . <br>
<br>There are valid measurement reports being generated , but why cant i view them in wireshark.? Looking forwards to your response as soon as possible. <br><br>[0;m[1;32m<0005> gsm48_mm.c:3911 (ms 1) Received 'RR_DATA_IND' from RR in state MM connection active (sapi 0)<br>
[0;m[1;33m<0006> gsm48_cc.c:2161 (ms 1) Received 'MMCC_DATA_IND' in CC state MO_CALL_PROC<br>[0;m[1;33m<0006> gsm48_cc.c:2115 (ms 1) Received 'ALERTING' in CC state MO_CALL_PROC<br>[0;m[1;33m<0006> gsm48_cc.c:717 received ALERTING<br>
[0;m[1;33m<0006> gsm48_cc.c:243 new state MO_CALL_PROC -> CALL_DELIVERED<br>[0;m[1;33m<0006> gsm48_cc.c:196 (ms 1 ti 0) Sending 'MNCC_ALERT_IND' to MNCC.<br>[0;m[1;37m<0009> mnccms.c:387 Call is alerting<br>
[0;m[1;34m<0001> gsm48_rr.c:662 MON: f=57 lev=-75 snr=62 ber=151 LAI=410 03 e165 ID=9463 TA=0 pwr=10 TS=1<br>[0;m[1;34m<0001> gsm48_rr.c:2864 <span style="background-color:rgb(255,255,51)">MEAS REP: pwr=10 TA=0 meas-invalid=0 rxlev-full=-75 rxlev-sub=-75 rxqual-full=0 rxqual-sub=0 dtx 0 ba 0 no-ncell-n 0</span><br>
[0;m[1;34m<0001> gsm48_rr.c:4767 Indicated ta 0 (actual ta 0)<br>[0;m[1;34m<0001> gsm48_rr.c:4769 Indicated tx_power 10<br>[0;m[1;34m<0001> gsm48_rr.c:4767 Indicated ta 0 (actual ta 0)<br>[0;m[1;34m<0001> gsm48_rr.c:4769 Indicated tx_power 10<br>
[0;m[1;34m<0001> gsm48_rr.c:662 MON: f=57 lev=-70 snr=49 ber= 81 LAI=410 03 e165 ID=9463 TA=0 pwr=10 TS=1<br>[0;m[1;34m<0001> gsm48_rr.c:2864 MEAS REP: pwr=10 TA=0 meas-invalid=0 rxlev-full=-70 rxlev-sub=-70 rxqual-full=0 rxqual-sub=0 dtx 0 ba 0 no-ncell-n 0<br>
[0;m[1;34m<0001> gsm48_rr.c:4767 Indicated ta 0 (actual ta 0)<br>[0;m[1;34m<0001> gsm48_rr.c:4769 Indicated tx_power 14<br><br>Thanks and Regards<br><br>