Hello everybody,<br><br>I bought several Pirelli DP-L10.  I checked out the master branch of Osmocom, changed the console.h and sercomm.h, and enabled the CONFIG_TX_ENABLE option.  The code compiled successfully.  I loaded the compiled firmware onto the Pirelli with osmocon, and after it loaded, I ran cell_log and mobile.  But the phone never syncs to a cell.<br>
<br>I first tried with the "no stick" option. But after this, I tried to find a strong cell (I used a Blackberry 9300 for this, it has a nice engineering screen).  I found cells from -76 dbm to -104 dbm.  I tried them all with the "stick xxx" option, but still, the phone does not sync to this cells.<br>
<br>The last thing I tried was using the binaries a friend provided me.  He compiled the code on his computer, he tested those binaries at his home, with his Pirelli, and it worked: he could sync.  He sent me those same binaries, but still no luck, the phone cannot sync.<br>
<br>I have tried this on 4 different computers, 2 different versions of Ubuntu, on Debian, and on a Mac.  It doesn't seem it's an operating system problem, but I wanted to test it anyway.  The only thing it's different from you it's I live in the Caribbean, but I have GSM networks on all four bands.<br>
<br>Now, if I use my sim on the Pirelli, with the original firmware, it works.  I can even make a call, so I think it's not a hardware problem.  I tested with Nokia C118 on a 850Mhz network, but same story.<br><br>I'm posting my mobile.cfg file, and some logs.<br>
<br>Thank you for your help.<br><br><br><br><br><br><br>