If you want to use a basic serial port, use a 3.3V version of the good ol' MAX232 (maybe MAX202? can't remember)<br><br>Sebastien<br><br><div class="gmail_quote">On Sun, Jun 12, 2011 at 8:20 PM, Alexander Huemer <span dir="ltr"><alexander.huemer@xx.vu></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="im">On Sun, Jun 12, 2011 at 11:11:37PM +0530, R M wrote:<br>
> Why do I need a USB/RS232 cable ?<br>
><br>
> If its a laptop, I can understand that they don't come with a serial port so<br>
> you need the converter.<br>
><br>
> Many PCs come with a serial port.<br>
><br>
> Can I not connect the serial version of the T191 unlock cable to PC serial<br>
> port?<br>
</div>You could, but the RS232 ports that are often present on ATX-style<br>
mainboards provide 12V, which is too much for the phone.<br>
<div class="im">><br>
> As far as I understand, the T191 unlock cable is used to convert RS232<br>
> signal level to 3.3V required by C128.<br>
</div>no. A serial T191 cable does nothing by itself.<br>
<div class="im">><br>
> Since I was able to get hold of a serial version of T191 unlock cable as I<br>
> told you in the begining of the mail, I also purchased a USB to Serial<br>
> converter. Its a BAFO BF-810.<br>
> Its based on Prolific chipset.<br>
</div>Unfortunately the prolific chips seem to not work as well for this<br>
purpose as the FTDI chips.<br>
<div class="im">><br>
> So I connected first the USB/RS232 converter  ju(BAFO BF-810) and then the<br>
> serial version of the T191 unlock cable.<br>
><br>
> Is this the right way ?<br>
>    OR<br>
> Can I just connect the USB/R232 converter (based on Prolific chipset) and<br>
> the use a cable which contains DB9 female on one side and 2.5mm jack on the<br>
> other?<br>
</div>I don't get the difference between those two ways.<br>
<div class="im">><br>
> I am asking the second question because you have mentioned in the wiki under<br>
> Hints and Warnings like this:<br>
><br>
> If you don't use a 3.3V (low voltage TTL, LVCMOS) serial port you can fry<br>
> your phone! (internally, it connects to the IO-pins of the baseband<br>
> processor which run at 2.8V). *Don't connect directly to your PCs serial<br>
</div>> port (running at +/- 12V!).*<br>
This warning wants to tell you that you should use a USB<-->RS232<br>
converter and not use an onboard port of a PC.<br>
<br>
Kind regards<br>
-Alex<br>
<br>
</blockquote></div><br>