This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
robert robert.steve07 at gmail.comI can’t figure out a way to dynamically set the time slot, I’m always getting errors during compilation. When I solve these errors I will give you some feedback about any progress. Best regards, Robert, On Mar 16, 2016, at 4:50 PM, Harald Welte <laforge at gnumonks.org> wrote: > Hi Robert, > > On Wed, Mar 16, 2016 at 04:30:19PM +0200, robert wrote: >> As stated in an old discussion, the prim_rx_nb.c file should be modified to change the time slot number: >> "l1s_rx_win_ctrl(arfcn, L1_RXWIN_NB, 0);” >> however if i change it to another number (ex: 2,4,6), the phone will not be able to detect the BCCH signal of the BTS >> so it will not connect to the network. Am I changing the wrong parameter ? > > you should probably change it to the dynamically determined 'tn' instead > of a hard-coded number. Please send a patch, if that seems to work for > you. > > -- > - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ > ============================================================================ > "Privacy in residential applications is a desirable marketing option." > (ETSI EN 300 175-7 Ch. A6)