This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
robert robert.steve07 at gmail.comtry a5/1, maybe your operator doesn’t allow you to have no encryption On Feb 29, 2016, at 5:16 PM, alex <jarne76 at icloud.com> wrote: > for short moment connection was active but after this > > > <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. > <0001> gsm48_rr.c:673 MON: f=646 lev=-78 snr= 0 ber= 0 LAI=255 03 69a7 > ID=463f > <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 1) > <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 20 combined no S(lots) 109 > ra 0x07) > <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 0 (30 dBm) > LOSS counter for CCCH 86 > Dropping frame with 61 bit errors > <0003> gsm322.c:3026 Loss of CCCH. > <0003> gsm322.c:3031 Keep cell selected after loss, so we can use the > Neighbour cell information for cell re-selection. > <0003> gsm322.c:3090 Loss of SACCH, Trigger RR abort. > <000e> gsm48_rr.c:2902 Radio link lost signal > <0001> gsm48_rr.c:2909 LOS during RACH request > <0001> gsm48_rr.c:366 new state connection pending -> idle > <0003> gsm322.c:4037 (ms 1) Event 'EVENT_RET_IDLE' for Cell selection in > state 'connected mode 1' > <0003> gsm322.c:3565 Selecting ARFCN 646(DCS). after LOC.UPD. > <0003> gsm322.c:463 Sync to ARFCN=646(DCS) rxlev=-79 (Sysinfo, ccch mode > NON-COMB) > <0003> gsm322.c:823 new state 'connected mode 1' -> 'C3 camped normally' > <0005> gsm48_mm.c:3902 (ms 1) Received 'RR_REL_IND' from RR in state wait > for RR connection (location updating) (sapi 0) > <0005> gsm48_mm.c:2732 RR link released after loc. upd. > <000e> gsm48_mm.c:2676 Location update failed > <000e> gsm48_mm.c:2686 Try location update later > <0005> gsm48_mm.c:2688 Loc. upd. failed, retry #0 > <0005> gsm48_mm.c:413 starting T3211 (loc. upd. retry delay) with 15.0 > seconds > <0005> gsm48_mm.c:1143 We are camping normally as returning to MM IDLE > <0005> gsm48_mm.c:1159 Loc. upd. allowed. > <0005> gsm48_mm.c:919 new state wait for RR connection (location updating) > -> MM IDLE, location updating needed > <0005> gsm48_mm.c:909 new MM IDLE state location updating needed -> > attempting to update > <0005> gsm48_mm.c:2215 Loc. upd. already pending. > <0005> gsm48_mm.c:4311 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in > state MM IDLE, attempting to update > <0005> gsm48_mm.c:2215 Loc. upd. already pending. > <0003> gsm322.c:2981 Channel sync error, try again > <0003> gsm322.c:463 Sync to ARFCN=646(DCS) rxlev=-79 (Sysinfo, ccch mode > NON-COMB) > <0003> gsm322.c:2938 Channel synched. (ARFCN=646(DCS), snr=16, BSIC=38) > <0001> gsm322.c:2959 using DSC o > > > > -- > View this message in context: http://baseband-devel.722152.n3.nabble.com/Set-fixed-TMSI-and-Kc-tp3894059p4026736.html > Sent from the baseband-devel mailing list archive at Nabble.com.