Set fixed TMSI and Kc

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.

alex jarne76 at icloud.com
Mon Feb 29 15:16:46 UTC 2016


for short moment connection was active but after this 


<0001> gsm48_rr.c:2170 PAGING ignored, we are not camping.
<0001> gsm48_rr.c:673 MON: f=646 lev=-78 snr= 0 ber=  0 LAI=255 03 69a7
ID=463f
<0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 1)
<0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 20 combined no S(lots) 109
ra 0x07)
<0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 0 (30 dBm)
LOSS counter for CCCH 86
Dropping frame with 61 bit errors
<0003> gsm322.c:3026 Loss of CCCH.
<0003> gsm322.c:3031 Keep cell selected after loss, so we can use the
Neighbour cell information for cell re-selection.
<0003> gsm322.c:3090 Loss of SACCH, Trigger RR abort.
<000e> gsm48_rr.c:2902 Radio link lost signal
<0001> gsm48_rr.c:2909 LOS during RACH request
<0001> gsm48_rr.c:366 new state connection pending -> idle
<0003> gsm322.c:4037 (ms 1) Event 'EVENT_RET_IDLE' for Cell selection in
state 'connected mode 1'
<0003> gsm322.c:3565 Selecting ARFCN 646(DCS). after LOC.UPD.
<0003> gsm322.c:463 Sync to ARFCN=646(DCS) rxlev=-79 (Sysinfo, ccch mode
NON-COMB)
<0003> gsm322.c:823 new state 'connected mode 1' -> 'C3 camped normally'
<0005> gsm48_mm.c:3902 (ms 1) Received 'RR_REL_IND' from RR in state wait
for RR connection (location updating) (sapi 0)
<0005> gsm48_mm.c:2732 RR link released after loc. upd.
<000e> gsm48_mm.c:2676 Location update failed
<000e> gsm48_mm.c:2686 Try location update later
<0005> gsm48_mm.c:2688 Loc. upd. failed, retry #0
<0005> gsm48_mm.c:413 starting T3211 (loc. upd. retry delay) with 15.0
seconds
<0005> gsm48_mm.c:1143 We are camping normally as returning to MM IDLE
<0005> gsm48_mm.c:1159 Loc. upd. allowed.
<0005> gsm48_mm.c:919 new state wait for RR connection (location updating)
-> MM IDLE, location updating needed
<0005> gsm48_mm.c:909 new MM IDLE state location updating needed ->
attempting to update
<0005> gsm48_mm.c:2215 Loc. upd. already pending.
<0005> gsm48_mm.c:4311 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in
state MM IDLE, attempting to update
<0005> gsm48_mm.c:2215 Loc. upd. already pending.
<0003> gsm322.c:2981 Channel sync error, try again
<0003> gsm322.c:463 Sync to ARFCN=646(DCS) rxlev=-79 (Sysinfo, ccch mode
NON-COMB)
<0003> gsm322.c:2938 Channel synched. (ARFCN=646(DCS), snr=16, BSIC=38)
<0001> gsm322.c:2959 using DSC o



--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Set-fixed-TMSI-and-Kc-tp3894059p4026736.html
Sent from the baseband-devel mailing list archive at Nabble.com.



More information about the baseband-devel mailing list