This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Craig Comstock craig_comstock at yahoo.comFWIW, someone asked me whether c113 worked. I found a cheap 113a and hello_world loaded pretty well. The screen on my phone is shot but the backlight did come on.it works fine with the following command: craig at craig:~/c115-osmocom-bb/src$ host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor target/firmware/board/compal_e88/hello_world.compalram.bin OsmocomBB Hello World (revision osmocon_v0.0.0-1754-gfc20a37) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: c5c63637a5039778 ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== entering interrupt loop -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20150616/c8b11f22/attachment.htm>