Pirelli DPL10 - nuttx and dump flash for restore later

Alan Carvalho de Assis acassis at gmail.com
Thu May 2 14:33:13 UTC 2013


Hi Craig,

Yes, creating a new board config to pirelli_dp10 is the right thing to do.

Patches are welcome!

Best Regards,

Alan

On 5/2/13, Craig Comstock <craig_comstock at yahoo.com> wrote:
> I did get this working on the DPL10 by enabling IRDA console.
>
> I did it two ways: copying nuttx/configs/compal_e88 to
> nuttx/configs/pirelli_dpl10 and editing nsh_highram/defconfig and after
> reading more carefully just using compal_e88 and editing
> nuttx/.config
>
>
> CONFIG_SERIAL_IRDA_CONSOLE=y
>
>
> maybe I could submit a patch that made a new directory for pirelli_dpl10
> that matches compal_e88 but has IRDA console enabled?
>
> now on to other things... like layer 1/2, graphics...
> -Craig
>
>
> ________________________________
>  From: Alan Carvalho de Assis <acassis at gmail.com>
>
> To: Craig Comstock <craig_comstock at yahoo.com>
> Cc: "baseband-devel at lists.osmocom.org" <baseband-devel at lists.osmocom.org>
> Sent: Friday, April 5, 2013 12:24 PM
> Subject: Re: Pirelli DPL10 - nuttx and dump flash for restore later
>
>
> Hi Craig,
>
> On 4/5/13, Craig Comstock <craig_comstock at yahoo.com> wrote:
>>
>> I was wondering if someone could give me a nudge on how to get started
>> getting nuttx working on this phone?
>>
>
> I never tested it on Pirelli phone, but since it is same baseband as
> GTA phones, you just need to use:
>
> $ cd nuttx/tools
> $ ./configure.sh compal_e88/nsh_highram
> $ cd ..
> $ make
>
> Then upload nuttx.bin using chainload.compalram.bin as explained here:
>
> http://bb.osmocom.org/trac/wiki/nuttx-bb/configurations
>
> Keep in mind the main development platform for nuttx-bb is C155
> (compal_e99).
>
> If you need help, please enter in IRC channel ##nuttx-bb
> (irc.freenode.net).
>
> More info:
> http://bb.osmocom.org/trac/wiki/nuttx-bb
>
> Best Regards,
>
> Alan




More information about the baseband-devel mailing list