From osmocom at ngolde.de Tue Mar 5 20:05:19 2013 From: osmocom at ngolde.de (Nico Golde) Date: Tue, 5 Mar 2013 21:05:19 +0100 Subject: suggesting new mailing lists for osmocombb In-Reply-To: <4D5A32CF.8060104@in.tum.de> References: <2F1EEB43BFA34E6A90BD9FC267E5700E@CentroSalud> <4D59CDB7.10408@steve-m.de> <4D5A32CF.8060104@in.tum.de> Message-ID: <20130305200519.GI5279@ngolde.de> Hi, * Hagen Fritsch [2013-02-10 16:32]: [...] > That was just an idea, but then again I don?t really want to start a > discussion on mailinglist vs forums. Therefore a summary of arguments is > found for example here: > http://www.freelock.com/blog/john-locke/2010-03/mailing-list-or-forum-theory Yeah and most of them are stupid: - Conversations are grouped by topic => get a better mail client There is one place to go to see an entire history of the community => not true, forums don't aggregate news feeds, git repositories etc. the community is not defined by people who are active in chatter Forums are usually better-organized, easier to browse, easier to search => get a better mail client You can subscribe to some topics and not others, have a very granular control over what you pay attention to => get a better mail client Forums are "pull" -- you have to go to the site and "pull" the content down, instead of it being pushed to you and possibly interrupting your other activities => email can be both push and pull Given the idiocy of his arguments, I stop here and won't comment on his thoughts on mailing list. Maybe we should raise the bar for raise the bar for communication and move to usenet!1!? ;-P SCNR Nico -- Nico Golde - XMPP: nion at jabber.ccc.de - GPG: 0xA0A0AAAA From laforge at gnumonks.org Tue Mar 5 21:26:05 2013 From: laforge at gnumonks.org (Harald Welte) Date: Tue, 5 Mar 2013 21:26:05 +0000 Subject: suggesting new mailing lists for osmocombb In-Reply-To: <20130305200519.GI5279@ngolde.de> References: <2F1EEB43BFA34E6A90BD9FC267E5700E@CentroSalud> <4D59CDB7.10408@steve-m.de> <4D5A32CF.8060104@in.tum.de> <20130305200519.GI5279@ngolde.de> Message-ID: <20130305212605.GA7042@prithivi.gnumonks.org> On Tue, Mar 05, 2013 at 09:05:19PM +0100, Nico Golde wrote: > Maybe we should raise the bar for raise the bar for communication and > move to usenet!1!? ;-P I'd be all for that. I personally think gmane.org is doing the techniaclly most reasonable thing: * organize communication as Usenet newsgroups * provide a NNTP as well as a nice web user interface to it -- - Harald Welte http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6) From HungHM10 at viettel.com.vn Mon Mar 4 01:48:56 2013 From: HungHM10 at viettel.com.vn (hunghm10) Date: Mon, 04 Mar 2013 08:48:56 +0700 Subject: suggesting new mailing lists for osmocombb In-Reply-To: <4D59CDB7.10408@steve-m.de> References: <4D59CDB7.10408@steve-m.de> Message-ID: <5133FD88.2030808@viettel.com.vn> Dear osmocomBB, I'm using osmocomBB to make a call: OsmocomBB# call 1 0987785050 But terminal response: % (MS 1) % Trying to registering with network... And layer23 response in my attach file. Can you tell me why I cannot register with network? I live in Vietnam. I'm testing on Viettel gsm network. -- Thanks and Regards ! ------------------------------------ Hoang Manh Hung Information Security Department -- Viettel Group Office: 1st floor, CIT Builiding, Duy Tan str., Cau Giay dist., Hanoi Mobile: 09.8778.5050 Email: hunghm10 at viettel.com.vn ------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: osmocom 2013-03-01 18:06:53.png Type: image/png Size: 297773 bytes Desc: not available URL: From akibsayyed at gmail.com Tue Mar 5 12:42:23 2013 From: akibsayyed at gmail.com (Akib Sayyed) Date: Tue, 5 Mar 2013 15:42:23 +0300 Subject: suggesting new mailing lists for osmocombb In-Reply-To: <5133FD88.2030808@viettel.com.vn> References: <4D59CDB7.10408@steve-m.de> <5133FD88.2030808@viettel.com.vn> Message-ID: Just a single screen shot is not enough to understand. Please post loads of logs on pastebin then post that link in here On Mon, Mar 4, 2013 at 4:48 AM, hunghm10 wrote: > Dear osmocomBB, > > I'm using osmocomBB to make a call: > OsmocomBB# call 1 0987785050 > > But terminal response: > % (MS 1) > % Trying to registering with network... > > And layer23 response in my attach file. > > Can you tell me why I cannot register with network? > > I live in Vietnam. I'm testing on Viettel gsm network. > > -- > > Thanks and Regards ! > ------------------------------------ > Hoang Manh Hung > Information Security Department ? Viettel Group > Office: 1st floor, CIT Builiding, Duy Tan str., Cau Giay dist., Hanoi > Mobile: 09.8778.5050 > Email: hunghm10 at viettel.com.vn > ------------------------------------ > > -- Akib Sayyed Matrix-Shell akibsayyed at gmail.com akibsayyed at matrixshell.com Mob:- +91-966-514-2243 -------------- next part -------------- An HTML attachment was scrubbed... URL: From arslan.anj at gmail.com Tue Mar 5 17:38:31 2013 From: arslan.anj at gmail.com (Arslan Anjum) Date: Tue, 5 Mar 2013 22:38:31 +0500 Subject: suggesting new mailing lists for osmocombb In-Reply-To: References: <4D59CDB7.10408@steve-m.de> <5133FD88.2030808@viettel.com.vn> Message-ID: Dear Hoang, Please make sure that you have enabled transmission to the network before compiling the src. It's in osmocom-bb/src/target/firmware/Makefile # Uncomment this line if you want to enable Tx (Transmit) Support. #CFLAGS += -DCONFIG_TX_ENABLE Regards, Arslan Anjum Research Assitant Lahore University of Management Science, Pakistan On Tue, Mar 5, 2013 at 5:42 PM, Akib Sayyed wrote: > Just a single screen shot is not enough to understand. > Please post loads of logs on pastebin then post that link in here > > > > On Mon, Mar 4, 2013 at 4:48 AM, hunghm10 wrote: >> >> Dear osmocomBB, >> >> I'm using osmocomBB to make a call: >> OsmocomBB# call 1 0987785050 >> >> But terminal response: >> % (MS 1) >> % Trying to registering with network... >> >> And layer23 response in my attach file. >> >> Can you tell me why I cannot register with network? >> >> I live in Vietnam. I'm testing on Viettel gsm network. >> >> -- >> >> Thanks and Regards ! >> ------------------------------------ >> Hoang Manh Hung >> Information Security Department ? Viettel Group >> Office: 1st floor, CIT Builiding, Duy Tan str., Cau Giay dist., Hanoi >> Mobile: 09.8778.5050 >> Email: hunghm10 at viettel.com.vn >> ------------------------------------ > > > > > -- > Akib Sayyed > Matrix-Shell > akibsayyed at gmail.com > akibsayyed at matrixshell.com > Mob:- +91-966-514-2243 > From zero-kelvin at gmx.de Tue Mar 5 22:48:42 2013 From: zero-kelvin at gmx.de (dexter) Date: Tue, 05 Mar 2013 23:48:42 +0100 Subject: Osmocom Berlin User Group meeting In-Reply-To: <20120818115942.GV29525@prithivi.gnumonks.org> References: <502d01a9.mirider@mirider.augusta.de> <20120818115942.GV29525@prithivi.gnumonks.org> Message-ID: <5136764A.5040903@gmx.de> Hi folks. This is the announcement for the next Osmocom Berlin meeting. Mar 6, 8pm @ CCC Berlin, Marienstr. 11, 10117 Berlin There is no formal presentation scheduled for this meeting. If you are interested to show up, feel free to do so. There is no registration required. The meeting is free as in "free beer", despite no actual free beer being around. Regards, Philipp Maier From zero-kelvin at gmx.de Tue Mar 19 22:47:33 2013 From: zero-kelvin at gmx.de (dexter) Date: Tue, 19 Mar 2013 23:47:33 +0100 Subject: Osmocom Berlin User Group meeting In-Reply-To: <20120818115942.GV29525@prithivi.gnumonks.org> References: <502d01a9.mirider@mirider.augusta.de> <20120818115942.GV29525@prithivi.gnumonks.org> Message-ID: <5148EB05.2080000@gmx.de> Hi folks. This is the announcement for the next Osmocom Berlin meeting. Mar 20, 8pm @ CCC Berlin, Marienstr. 11, 10117 Berlin There is no formal presentation scheduled for this meeting. If you are interested to show up, feel free to do so. There is no registration required. The meeting is free as in "free beer", despite no actual free beer being around. Regards, Philipp Maier From peter at stuge.se Tue Mar 19 23:51:52 2013 From: peter at stuge.se (Peter Stuge) Date: Wed, 20 Mar 2013 00:51:52 +0100 Subject: Osmocom Berlin User Group meeting In-Reply-To: <5148EB05.2080000@gmx.de> References: <502d01a9.mirider@mirider.augusta.de> <20120818115942.GV29525@prithivi.gnumonks.org> <5148EB05.2080000@gmx.de> Message-ID: <20130319235152.20844.qmail@stuge.se> dexter wrote: > This is the announcement for the next Osmocom Berlin meeting. > > Mar 20, 8pm @ CCC Berlin, Marienstr. 11, 10117 Berlin > > There is no formal presentation scheduled for this meeting. There might be talk about the EasterHegg test network and I'll report on my visit to the OHM2013 terrain. //Peter From alexander.chemeris at gmail.com Wed Mar 20 05:26:27 2013 From: alexander.chemeris at gmail.com (Alexander Chemeris) Date: Wed, 20 Mar 2013 09:26:27 +0400 Subject: Osmocom Berlin User Group meeting In-Reply-To: <20130319235152.20844.qmail@stuge.se> References: <502d01a9.mirider@mirider.augusta.de> <20120818115942.GV29525@prithivi.gnumonks.org> <5148EB05.2080000@gmx.de> <20130319235152.20844.qmail@stuge.se> Message-ID: On Wed, Mar 20, 2013 at 3:51 AM, Peter Stuge wrote: > dexter wrote: >> This is the announcement for the next Osmocom Berlin meeting. >> >> Mar 20, 8pm @ CCC Berlin, Marienstr. 11, 10117 Berlin >> >> There is no formal presentation scheduled for this meeting. > > There might be talk about the EasterHegg test network > and I'll report on my visit to the OHM2013 terrain. Please share this information with non-Berliners too! -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ??? ??????? http://fairwaves.ru From zero-kelvin at gmx.de Sat Mar 30 20:54:05 2013 From: zero-kelvin at gmx.de (dexter) Date: Sat, 30 Mar 2013 21:54:05 +0100 Subject: Osmocom Berlin User Group meeting In-Reply-To: <20120818115942.GV29525@prithivi.gnumonks.org> References: <502d01a9.mirider@mirider.augusta.de> <20120818115942.GV29525@prithivi.gnumonks.org> Message-ID: <515750ED.4020007@gmx.de> Hi folks. This is the announcement for the next Osmocom Berlin meeting. Apr 03, 8pm @ CCC Berlin, Marienstr. 11, 10117 Berlin There is no formal presentation scheduled for this meeting. If you are interested to show up, feel free to do so. There is no registration required. The meeting is free as in "free beer", despite no actual free beer being around. Regards, Philipp Maier From alberto at computer.org Sat Mar 30 21:50:23 2013 From: alberto at computer.org (Alberto Fabiano) Date: Sat, 30 Mar 2013 18:50:23 -0300 Subject: Osmocom Berlin User Group meeting In-Reply-To: <515750ED.4020007@gmx.de> References: <502d01a9.mirider@mirider.augusta.de> <20120818115942.GV29525@prithivi.gnumonks.org> <515750ED.4020007@gmx.de> Message-ID: Hi Folks, [2] Please share this information with non-Berliners too! If possible, or course... [ ]s -- Alberto Fabiano ||| alberto at computer.org -.. .- -. -.- .- -.--.. .. -.-. --. .. ... - ?Security is an illusion. Paranoia is our profession."-- Strategic Air command. -. .. ... - -- .. -. ...- . -. - .. - .- "The best way to predict the future is to invent it." --Alan Kay On Sat, Mar 30, 2013 at 5:54 PM, dexter wrote: > Hi folks. > > > This is the announcement for the next Osmocom Berlin meeting. > > Apr 03, 8pm @ CCC Berlin, Marienstr. 11, 10117 Berlin > > > There is no formal presentation scheduled for this meeting. > > If you are interested to show up, feel free to do so. There is no > registration required. The meeting is free as in "free beer", despite > no actual free beer being around. > > Regards, > Philipp Maier > > > From martin.zicke at gmx.de Fri Mar 1 10:32:32 2013 From: martin.zicke at gmx.de (Madin) Date: Fri, 1 Mar 2013 02:32:32 -0800 (PST) Subject: Osmovom-BB on Raspberry Pi In-Reply-To: <1362016925226-4025886.post@n3.nabble.com> References: <1362016925226-4025886.post@n3.nabble.com> Message-ID: <1362133952464-4025896.post@n3.nabble.com> ...Update: It's compiling now, must have been too tired / late for me -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Osmovom-BB-on-Raspberry-Pi-tp4025859p4025896.html Sent from the baseband-devel mailing list archive at Nabble.com. From tmjerry04 at gmail.com Mon Mar 25 14:58:53 2013 From: tmjerry04 at gmail.com (tom jerry) Date: Mon, 25 Mar 2013 17:58:53 +0300 Subject: Osmovom-BB on Raspberry Pi In-Reply-To: <1362133952464-4025896.post@n3.nabble.com> References: <1362016925226-4025886.post@n3.nabble.com> <1362133952464-4025896.post@n3.nabble.com> Message-ID: hi, everyone i got the exact error Martin has posted in this thread.please help me. I am stuck.i successfully compiled the tool chain On 3/1/13, Madin wrote: > ...Update: > It's compiling now, must have been too tired / late for me > > > > -- > View this message in context: > http://baseband-devel.722152.n3.nabble.com/Osmovom-BB-on-Raspberry-Pi-tp4025859p4025896.html > Sent from the baseband-devel mailing list archive at Nabble.com. > > From martin.zicke at gmx.de Wed Mar 27 00:35:53 2013 From: martin.zicke at gmx.de (Madin) Date: Tue, 26 Mar 2013 17:35:53 -0700 (PDT) Subject: Osmovom-BB on Raspberry Pi In-Reply-To: References: <1362016925226-4025886.post@n3.nabble.com> <1362133952464-4025896.post@n3.nabble.com> Message-ID: <1364344553762-4025942.post@n3.nabble.com> > i successfully compiled the toolchain ...afterwards compile libosmocore -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Osmovom-BB-on-Raspberry-Pi-tp4025859p4025942.html Sent from the baseband-devel mailing list archive at Nabble.com. From tmjerry04 at gmail.com Wed Mar 27 09:06:55 2013 From: tmjerry04 at gmail.com (tom jerry) Date: Wed, 27 Mar 2013 12:06:55 +0300 Subject: Osmovom-BB on Raspberry Pi In-Reply-To: <1364344553762-4025942.post@n3.nabble.com> References: <1362016925226-4025886.post@n3.nabble.com> <1362133952464-4025896.post@n3.nabble.com> <1364344553762-4025942.post@n3.nabble.com> Message-ID: thanks,solved that error,now i have this error: comments.gmane.org/gmane.comp.mobile.osmocom.baseband.devel/3331 help me once more. Kind Regards On 3/27/13, Madin wrote: >> i successfully compiled the toolchain > > ...afterwards compile libosmocore > > > > -- > View this message in context: > http://baseband-devel.722152.n3.nabble.com/Osmovom-BB-on-Raspberry-Pi-tp4025859p4025942.html > Sent from the baseband-devel mailing list archive at Nabble.com. > > From 246tnt at gmail.com Wed Mar 27 09:46:49 2013 From: 246tnt at gmail.com (Sylvain Munaut) Date: Wed, 27 Mar 2013 10:46:49 +0100 Subject: Osmovom-BB on Raspberry Pi In-Reply-To: References: <1362016925226-4025886.post@n3.nabble.com> <1362133952464-4025896.post@n3.nabble.com> <1364344553762-4025942.post@n3.nabble.com> Message-ID: > thanks,solved that error,now i have this error: > comments.gmane.org/gmane.comp.mobile.osmocom.baseband.devel/3331 You need to compile and install the libosmocore from the libosmocore git and NOT the one that's in shared/... this latter one is used for some internal stuff and shouldn't be use for the host. Cheers, Sylvain From tmjerry04 at gmail.com Wed Mar 27 14:00:09 2013 From: tmjerry04 at gmail.com (tom jerry) Date: Wed, 27 Mar 2013 17:00:09 +0300 Subject: Osmovom-BB on Raspberry Pi In-Reply-To: References: <1362016925226-4025886.post@n3.nabble.com> <1362133952464-4025896.post@n3.nabble.com> <1364344553762-4025942.post@n3.nabble.com> Message-ID: thanks Sylvain.it worked. I have a c118 and when i try to run the hello world i only get: got 5 bytes from modem, data looks like: 00 00 d8 00 00 ..... How long should i wait until it loads? Thanks On 3/27/13, Sylvain Munaut <246tnt at gmail.com> wrote: >> thanks,solved that error,now i have this error: >> comments.gmane.org/gmane.comp.mobile.osmocom.baseband.devel/3331 > > You need to compile and install the libosmocore from the libosmocore > git and NOT the one that's in shared/... this latter one is used for > some internal stuff and shouldn't be use for the host. > > > Cheers, > > Sylvain > From arslan.anj at gmail.com Sun Mar 3 13:03:43 2013 From: arslan.anj at gmail.com (Arslan Anjum) Date: Sun, 3 Mar 2013 18:03:43 +0500 Subject: Error: no such instruction: `eor %edx,%ecx,%ecx,ror' In-Reply-To: <20130227150440.3280.qmail@stuge.se> References: <20130227020233.7834.qmail@stuge.se> <20130227150440.3280.qmail@stuge.se> Message-ID: The error was actually sillier than I expected. I copied the arm-elf-toolchain from a friend and I didn't change the access level before using it. A simple "chmod 777 ___" command did the trick. Arslan On Wed, Feb 27, 2013 at 8:04 PM, Peter Stuge wrote: > A: Because it is backwards, confusing and doesn't make sense. > Q: Why should I never top-post? > > Arslan Anjum wrote: >> >> I can't compile after the last pull. >> > >> > Your build is using a host library for the target binary build, which >> > of course can't work. >> >> How do I fix that? > > By giving the build commands parameters that are appropriate for how > you have arranged the many different components on your system. > > If you have no clue about how the build commands work then probably > you have to start with studying that for a while. Key words are > autoconf, automake and libtool, sometimes collectively called autotools. > > > //Peter > From akibsayyed at gmail.com Sat Mar 2 13:28:22 2013 From: akibsayyed at gmail.com (Akib Sayyed) Date: Sat, 2 Mar 2013 16:28:22 +0300 Subject: Decoding AMR In-Reply-To: <20130228154308.GC1262@prithivi.gnumonks.org> References: <20130228113709.GS1262@prithivi.gnumonks.org> <20130228154308.GC1262@prithivi.gnumonks.org> Message-ID: Okies I shall follow your instructions On Thu, Feb 28, 2013 at 6:43 PM, Harald Welte wrote: > On Thu, Feb 28, 2013 at 05:54:27PM +0300, Akib Sayyed wrote: > > I tried studying TSM code layer1 and Osmocom layer1 for purpose of > > implementing them in cellphone it self but i as far as i know that init > of > > some variables required for amr are completed but couldnt be able to > > figure out what exactly part remaining . > > I remain with what I stated before: > > you first need to understand the detailed operation of AMR in the > context of GSM by studying the specs. I'm mostly talking about the > encoding of the various bits, signalling of codec mode changes, etc. - > not the mathematical background of the actual voice codec. It might > also help to study related documents like the IF2 and RTP formats for > AMR. > > Only with that backgorund knowledge _and_ knowledge of the TSM30 L1 code > as well as traces from actual AMR calls on A-bis and possibly Um, I > think you will be in a position to fully understand the porblem and > implement what is needed. > > Asking for somebody to explain every little detail for you is not the > way to solve any problem. If Sylvian, Dieter, Andreas or I sit down, > read the code + dosc, and give minute instructions what needs to be > done, this consumes more of our time than if we actuall implement it > ourselves. > > If you have _specific_ technical questions, please come back to the > list. If you have a specific question, please include a precise > reference to the chapter/section of the specification (+ exact version > of the document), the exact function or data structure you refer to. > > -- > - Harald Welte > http://laforge.gnumonks.org/ > > ============================================================================ > "Privacy in residential applications is a desirable marketing option." > (ETSI EN 300 175-7 Ch. > A6) > -- Akib Sayyed Matrix-Shell akibsayyed at gmail.com akibsayyed at matrixshell.com Mob:- +91-966-514-2243 -------------- next part -------------- An HTML attachment was scrubbed... URL: From mehrinjaved at gmail.com Fri Mar 1 15:07:15 2013 From: mehrinjaved at gmail.com (Mehrin Javed) Date: Fri, 1 Mar 2013 20:07:15 +0500 Subject: trouble loading trx-firmware In-Reply-To: <1362066039.26335.YahooMailNeo@web171202.mail.ir2.yahoo.com> References: <1362052882.78529.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1362066039.26335.YahooMailNeo@web171202.mail.ir2.yahoo.com> Message-ID: Try the command sudo ldconfig and then load binary on your phone. On Thursday, February 28, 2013, Erich Dachleger wrote: > Thanks for the answers. > It was the spaces between "../ ../" and the first commandline that was > the errorcause. > erich > > On Thu, Feb 28, 2013 at 1:01 PM, Erich Dachleger > wrote: > > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ > > ../target/firmware/board/compal_e88/trx.compalram.bin ../ > > ../target/firmware/board/compal_e88/chainload.highram.bin > > If I am not wrong, compalram image should be loaded as argument, while > highram image should be passed to -c, so this command is wrong. > > > I also tried switching highram-compalram: > > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ > > ../target/firmware/board/compal_e88/trx.highram.bin ../ > > ../target/firmware/board/compal_e88/chainload.compalram.bin > > > > That should be right: you're loading the chainloader that loads the > trx. This looks like the command I used to load the TRX. But if you're > getting the message "no such file" you're probably pointing to the > wrong file names. Do an "ls" from the dir you're running the code to > be sure you're pointing to right files. > > Last but not least: insist. Firmwares in my phones never load at the first > try. > Dario. > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dagar1935 at hotmail.co.uk Fri Mar 1 09:00:55 2013 From: dagar1935 at hotmail.co.uk (dagar) Date: Fri, 1 Mar 2013 01:00:55 -0800 (PST) Subject: Sending DTMF Message-ID: <1362128455320-4025895.post@n3.nabble.com> Hello all does osmocom support dtmf tones and can they be sent during a call if so how? thanks -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Sending-DTMF-tp4025895.html Sent from the baseband-devel mailing list archive at Nabble.com. From andreas at eversberg.eu Fri Mar 1 22:10:55 2013 From: andreas at eversberg.eu (Andreas Eversberg) Date: Fri, 01 Mar 2013 23:10:55 +0100 Subject: Sending DTMF In-Reply-To: <1362128455320-4025895.post@n3.nabble.com> References: <1362128455320-4025895.post@n3.nabble.com> Message-ID: <5131276F.40207@eversberg.eu> dagar wrote: > does osmocom support dtmf tones and can they be sent during a call if so > how? hi, just enter at vty: call 1 dtmf From niceguy108 at gmail.com Sun Mar 10 09:07:30 2013 From: niceguy108 at gmail.com (Bhaskar11) Date: Sun, 10 Mar 2013 14:37:30 +0530 Subject: Documentation for L1Ctl Message-ID: Sylvain, Where are the L1ctl.c calls documented? I want to know more about l1ctl_tx_fbsb_req() options and what they mean. But could not find any reference in 3GPP TS docs. Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed... URL: From niceguy108 at gmail.com Mon Mar 11 11:08:22 2013 From: niceguy108 at gmail.com (Bhaskar11) Date: Mon, 11 Mar 2013 16:38:22 +0530 Subject: Documentation for L1Ctl In-Reply-To: References: Message-ID: Sylvain? Anyone? On Sun, Mar 10, 2013 at 2:37 PM, Bhaskar11 wrote: > Sylvain, > > Where are the L1ctl.c calls documented? > > I want to know more about l1ctl_tx_fbsb_req() options and what they mean. > But could not find any reference in 3GPP TS docs. > > Thanks for your help. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From laforge at gnumonks.org Mon Mar 11 15:34:44 2013 From: laforge at gnumonks.org (Harald Welte) Date: Mon, 11 Mar 2013 16:34:44 +0100 Subject: Rude behavior on the lists (was Re: Documentation for L1Ctl) In-Reply-To: References: Message-ID: <20130311153444.GQ6508@prithivi.gnumonks.org> Bhaskar, On Mon, Mar 11, 2013 at 04:38:22PM +0530, Bhaskar11 wrote: > Sylvain? Anyone? your behaviour on this list is absolutely rude. Who do you think you are? What gives you the right to demand that anyone on this list responds to you? Have you bought some commercial support or are you a paying customer of any of us here? There are dozens of people who have been able to use, configure or even modify OsmocomBB based on the source code, the comments therein and the information provided in the wiki. OsmocomBB is a collaborative, community oriented project. If you are missing some documentation, feel free to read + understand the source code and then create the documentation you are missing. We are looking forward to your contribution and are very happy to host it on our wiki or other project servers (git repository, ...). If you have studied one specific function / primitive for many hours and still cannot understand what the particular task is, feel free to contact this mailing list. But expecting that anyone will take you by your hand and do your work for you is simply absurd. Also: Everyone here is doing OsmocomBB in their spare time. Expecting a response in 24 hours or less is simply absurd. Please don't ever be surprised if your requests to FOSS projecst get ignored, or if you get banned from mailing lists. Regards, Harald -- - Harald Welte http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6) From niceguy108 at gmail.com Mon Mar 11 16:32:12 2013 From: niceguy108 at gmail.com (Bhaskar11) Date: Mon, 11 Mar 2013 22:02:12 +0530 Subject: Rude behavior on the lists (was Re: Documentation for L1Ctl) In-Reply-To: <20130311153444.GQ6508@prithivi.gnumonks.org> References: <20130311153444.GQ6508@prithivi.gnumonks.org> Message-ID: Dear Harald and others, On Mon, Mar 11, 2013 at 9:04 PM, Harald Welte wrote: > On Mon, Mar 11, 2013 at 04:38:22PM +0530, Bhaskar11 wrote: > > Sylvain? Anyone? > > your behaviour on this list is absolutely rude. Who do you think you > are? What gives you the right to demand that anyone on this list > responds to you? Have you bought some commercial support or are you a > paying customer of any of us here? > I sincerely apologise. It was not my intention to sound rude. I will be more careful hearafter in how I word things. > There are dozens of people who have been able to use, configure or even > modify OsmocomBB based on the source code, the comments therein and the > information provided in the wiki. > And so have I, and I am grateful for all the work that has been done which I think is absolutely marvellous! > OsmocomBB is a collaborative, community oriented project. If you are > missing some documentation, feel free to read + understand the source > code and then create the documentation you are missing. We are looking > forward to your contribution and are very happy to host it on our wiki > or other project servers (git repository, ...). > > If you have studied one specific function / primitive for many hours and > still cannot understand what the particular task is, feel free to > contact this mailing list. In fact I have gone through source code and TS in detail, and experimented for some months. This is the part that was most tricky and where I could not find any documentation. Hence my request. As you will see, I have also at times tried to help out others on this list who are struggling like me. I hope to do more in time. For the moment I am trying to port OsmocomBB to Windows with some initial success, but am presently stuck on this part. I hope to share the code as soon as I can bring it to some level of stability. > But expecting that anyone will take you by > your hand and do your work for you is simply absurd. > Also: Everyone here is doing OsmocomBB in their spare time. Expecting a > response in 24 hours or less is simply absurd. Please don't ever be > surprised if your requests to FOSS projecst get ignored, or if you get > banned from mailing lists. > My apologies again! Sincerely B -------------- next part -------------- An HTML attachment was scrubbed... URL: From edachleger at yahoo.com Sun Mar 10 09:57:00 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Sun, 10 Mar 2013 09:57:00 +0000 (GMT) Subject: TRX CLK-indication and failing sync Message-ID: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> Hi list, I recently built the testing branch and openbts with respect to the transceiver-app. I built openbts without compilation flags for uhd and resamp(saw on irc that that should'nt be required) and without gnuradio.And I use the example sql openbts.db. I then use rssi-app to find the strongest reference cell and modify openbts.db But when I upload the firmware Lost messages occur after a series of stale burst-messages. openbts outputs a long chain of <0011> trx.c:512 TRX DATA? ..... interupted by single <0011> trx.c:190 TRX CLK Indication-messages. And phones of cannot register to openbts-network? or even see it when doing manual scan. Can the timing advance parameter and the BSIC parameterbe inserted to the openbts.db to remedy the failure of sync of the osmocom-phone-bts? If not can other measures be taken? regards erich Output from upload of firmware: ---------------- Received DOWNLOAD ACK from phone, your code is running now! Enabled Compal ramloader -> Calypso romloader chainloading mode Received ident ack from phone, sending parameter sequence read_file(../../target/firmware/board/compal_e88/trx.highram.bin): file_size=62964, hdr_len=0, dnload_len=62967 Received parameter ack from phone, starting download Finished, sent 63 blocks in total Received branch ack, your code is running now! battery_compal_e88_init: starting up OSMOCOM TRX (revision osmocon_v0.0.0-1747-geeafd9f-modified) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: 0dd7253ccb039bd6 ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== Assert DSP into Reset Releasing DSP from Reset Installing DSP extensions patch Setting some dsp_api.ndb values Setting API NDB parameters Finishing download phase DSP Download Status: 0x0002 DSP API Version: 0x3606 0x0000 LOST 819! BAT-ADC: 558?? 3?? 0?? 0 1023 389 364 227 ??? Charger at 26 mV. ??? Battery at 3814 mV. ??? Charging at 0 mA. ??? Battery capacity is 77%. ??? Battery range is 3199..3999 mV. ??? Battery full at 468 LSB .. full at 585 LSB ??? Charging at 239 LSB (204 mA). ??? BCICTL2=0x3ff ??? battery-info.flags=0x00000000 ??? bat_compal_e88_chg_state=0 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1, flags=0x7) Starting FCCH RecognitionFB0 (1271:1): TOA=? 384, Power= -64dBm, Angle=-9235Hz FB1 (1275:2): TOA= 1219, Power= -62dBm, Angle= 2081Hz ? fn_offset=1273 (fn=1275 + attempt=2 + ntdma = 0) ? delay=8 (fn_offset=1273 + 11 - fn=1275 - 1 ? scheduling next FB/SB detection task with delay 8 FB1 (1295:11): TOA=12467, Power= -62dBm, Angle=? 389Hz ? fn_offset=1293 (fn=1295 + attempt=11 + ntdma = 9) ? delay=8 (fn_offset=1293 + 11 - fn=1295 - 1 ? scheduling next FB/SB detection task with delay 8 =>FB @ FNR 1293 fn_offset=1293 qbits=4684 Synchronize_TDMA LOST 3660! SB1 (2590:1): TOA=?? 27, Power= -64dBm, Angle=? 431Hz => SB 0x00a6d3f1: BSIC=60 fn=1240157(935/ 9/41) qbits=16 Synchronize_TDMA =>FB @ FNR 2589 fn_offset=1240157 qbits=4924 LOST 1909! BAT-ADC: 558?? 3?? 0?? 0 1023 390 365 230 ??? Charger at 26 mV. ??? Battery at 3814 mV. ??? Charging at 0 mA. ??? Battery capacity is 77%. ??? Battery range is 3199..3999 mV. ??? Battery full at 468 LSB .. full at 585 LSB ??? Charging at 239 LSB (204 mA). ??? BCICTL2=0x3ff ??? battery-info.flags=0x00000000 LOST 1877! ??? bat_compal_e88_chg_state=0 LOST 1873! BTS MODE: 2 850 STALE BURST 2246 STALE BURST 2247 STALE BURST 2248 STALE BURST 2249 STALE BURST 2289 LOST 1884! LOST 1866! BAT-ADC: 554?? 4?? 0?? 0 1023 416 387 226 ??? Charger at 34 mV. ??? Battery at 3787 mV. ----------------- ----------------- Test with another strong reference cell ARFCN 53: ---------- L1CTL_FBSB_REQ (arfcn=53, flags=0x7) Starting FCCH RecognitionLOST 2063! FB0 (1629405:2): TOA= 1776, Power= -87dBm, Angle=-5747Hz FB1 (1629416:9): TOA=10523, Power= -87dBm, Angle= -514Hz ? fn_offset=1629415 (fn=1629416 + attempt=9 + ntdma = 8) ? delay=9 (fn_offset=1629415 + 11 - fn=1629416 - 1 ? scheduling next FB/SB detection task with delay 9 =>FB @ FNR 1629415 fn_offset=1629415 qbits=1908 Synchronize_TDMA key=19 released LOST 2618! SB1 (543187:1): TOA=?? 30, Power= -88dBm, Angle= -409Hz => SB 0x0160516d: BSIC=27 fn=894398(674/24/11) qbits=28 Synchronize_TDMA =>FB @ FNR 543186 fn_offset=894398 qbits=4936 LOST 1914! L1CTL_NEIGH_PM_REQ new list with 8 entries nb_cmd(0) and rxnb.msg != NULLccch_mode=0 TOA AVG is not 16 qbits, correcting (got 20) TOA AVG is not 16 qbits, correcting (got 15) ................... -------------- next part -------------- An HTML attachment was scrubbed... URL: From 246tnt at gmail.com Sun Mar 10 10:42:21 2013 From: 246tnt at gmail.com (Sylvain Munaut) Date: Sun, 10 Mar 2013 11:42:21 +0100 Subject: TRX CLK-indication and failing sync In-Reply-To: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> Message-ID: Hi, > I then use > rssi-app to find the strongest reference cell and modify openbts.db You obviously can't read ... In http://bb.osmocom.org/trac/wiki/Software/Transceiver it's clearly stated : "Warning: Only set GSM.Radio.C0 to an ARFCN you have a valid license for. " So if you modify openbts.db to set it to the strongest reference cell, you've just built a jammer for the local cell, congrats ... > But when I upload the firmware Lost messages occur after a series of stale > burst-messages. Those are inconsequential as long at they happen only at the beginning. At bootup there is too much load for the phone with all the initialization going on, but as long as "Lost" are "around" 1875 or appear during TDMA sync, they won't have any impact. > L1CTL_NEIGH_PM_REQ new list with 8 entries You're doing something else wrong because at no point will the TRX app do L1CTL_NEIGH_PM_REQ ... Cheers, Sylvain From edachleger at yahoo.com Sun Mar 10 11:05:41 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Sun, 10 Mar 2013 11:05:41 +0000 (GMT) Subject: Vedr: TRX CLK-indication and failing sync In-Reply-To: References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> Message-ID: <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> ________________________________ Hi, sorry if my supplied info was unclear. The arfcn I found with rssi-app I have set in the transceiver directory, not as CO. It was also the strongest I could find to use as reference, about -63 dbm, 6 km away. regards erich > I then use > rssi-app to find the strongest reference cell and modify openbts.db You obviously can't read ... In http://bb.osmocom.org/trac/wiki/Software/Transceiver it's clearly stated : "Warning: Only set GSM.Radio.C0 to an ARFCN you have a valid license for. " So if you modify openbts.db to set it to the strongest reference cell, you've just built a jammer for the local cell, congrats ... > But when I upload the firmware Lost messages occur after a series of stale > burst-messages. Those are inconsequential as long at they happen only at the beginning. At bootup there is too much load for the phone with all the initialization going on, but as long as "Lost" are "around" 1875? or appear during TDMA sync, they won't have any impact. > L1CTL_NEIGH_PM_REQ new list with 8 entries You're doing something else wrong because at no point will the TRX app do L1CTL_NEIGH_PM_REQ? ... Cheers, ? Sylvain -------------- next part -------------- An HTML attachment was scrubbed... URL: From edachleger at yahoo.com Thu Mar 14 09:58:51 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Thu, 14 Mar 2013 09:58:51 +0000 (GMT) Subject: Vedr: TRX CLK-indication and failing sync In-Reply-To: <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> Message-ID: <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> ________________________________ ________________________________ Hi, when I use wireshark I see mostly "GSMTAP header ARFCN(525),Downlink TS0,channel BCCH0, which probably is normal since the phones do not register or see the network.Manual search is done with phones after removing and reinserting batteries. Shouldn't there be seen sip invite messages? also.?Sipauthserve starts normally as well as smqueue. When watching the 29c3 video,after finishing configuring transceiver file, before launching openbts, it looks like a command related to an ARFCN is given from inside the directory where the transceiver is residing, which command is that? My OpenBTS.db config is supplied below regards Erich sqlite> SELECT * FROM CONFIG; CLI.SocketPath|/var/run/command|0|0|Path for Unix domain datagram socket used for the OpenBTS console interface. Control.Reporting.PhysStatusTable|/var/run/OpenBTSChannelTable.db|1|0|File path for channel status reporting database.? Static. Control.Reporting.TransactionTable|/var/run/TransactionTable.db|1|0|File path for transaction table database.? Static. Control.Reporting.TMSITable|/var/run/OpenBTSTMSITable.db|1|0|File path for TMSITable database.? Static. Control.Call.QueryRRLP.Early||0|1|If not NULL, query every MS for its location via RRLP during the setup of a call. Control.Call.QueryRRLP.Late||0|1|If not NULL, query every MS for its location via RRLP during the teardown of a call. Control.GSMTAP.TargetIP|127.0.0.1|0|1|Target IP address for GSMTAP packets; the IP address of Wireshark, if you use it for GSM. Control.LUR.AttachDetach|1|0|0|Attach/detach flag.? Set to 1 to use attach/detach procedure, 0 otherwise.? This will make initial LUR more prompt.? It will also cause an un-regstration if the handset powers off and really heavy LUR loads in areas with spotty coverage. Control.LUR.FailedRegistration.Message|Your handset is not provisioned for this network. |0|1|If defined, send this text message, followed by the IMSI, to unprovisioned handsets that are denied? registration. Control.LUR.FailedRegistration.ShortCode|1000|0|1|The return address for the failed registration message.? If the message is defined, this must also be defined. Control.LUR.NormalRegistration.Message||0|1|If defined, send this text message, followed by the IMSI, to provisioned handsets when they attach on Um. Control.LUR.NormalRegistration.ShortCode|0000|0|1|The return address for the normal registration message.? If the message is defined, this must also be defined. Control.LUR.OpenRegistration|.*|0|1|If not NULL, allow unprovisioned handsets to attach in Um. Control.LUR.OpenRegistration.Message|Welcome to the GSM test network.? Your IMSI is |0|1|If defined, send this text message, followed by the IMSI, to unprovisioned handsets when they attach on Um due to open registration. Control.LUR.OpenRegistration.ShortCode|101|0|1|The return address for the open registration message.? If the message is defined, this must also be defined. Control.LUR.QueryClassmark||0|1|If not NULL, query every MS for classmark during LUR. Control.LUR.QueryIMEI||0|1|If not NULL, query every MS for IMSI during LUR. Control.LUR.QueryRRLP||0|1|If not NULL, query every MS for its location via RRLP during LUR. Control.LUR.SendTMSIs||0|1|If not NULL, send new TMSI assignments to handsets that are allowed to attach. Control.LUR.UnprovisionedRejectCause|0x04|0|0|Reject cause for location updating failures for unprovisioned phones.? Reject causes come from GSM 04.08 10.5.3.6.? Reject cause 0x04, IMSI not in VLR, is usually the right one. Control.NumSQLTries|3|0|0|Number of times to retry SQL queries before declaring a database access failure. Control.SMS.QueryRRLP||0|1|If not NULL, query every MS for its location via RRLP during an SMS. Control.TMSITable.MaxAge|72|0|0|Maximum allowed age for a TMSI in hours. Control.TMSITable.MaxSize|100000|0|0|Maximum size of TMSI table before oldest TMSIs are discarded. Control.VEA|1|0|1|If not NULL, user very early assignment for speech call establishment.? See GSM 04.08 Section 7.3.2 for a detailed explanation of assignment types. If VEA is selected, GSM.CellSelection.NECI should be set to 1.? See GSM 04.08 Sections 9.1.8 and 10.5.2.4 for an explanation of the NECI bit. GSM.CCCH.AGCH.QMax|5|0|0|Maximum number of access grants to be queued for transmission on AGCH before declaring congrestion. GSM.CCCH.CCCH-CONF|1|0|0|CCCH configuration type.? See GSM 10.5.2.11 for encoding.? Value of 1 means we are using a C-V beacon.? Any other value selects a C-IV beacon. GSM.Channels.SDCCHReserve|0|0|0|Number of SDCCHs to reserve for non-LUR operations. This can be used to force LUR transactions into a lower priority. GSM.CellSelection.CELL-RESELECT-HYSTERESIS|3|0|0|Cell Reselection Hysteresis.? See GSM 04.08 10.5.2.4, Table 10.5.23 for encoding.? Encoding is $2N$ dB, values of $N$ are 0...7 for 0...14 dB. GSM.CellSelection.MS-TXPWR-MAX-CCH|0|0|0|Cell selection parameters.? See GSM 04.08 10.5.2.4. GSM.CellSelection.NCCsPermitted|1|0|0|NCCs Permitted.? An 8-bit mask of allowed NCCs.? Unless you are coordinating with another carrier, this should probably just select your own NCC. GSM.CellSelection.NECI|1|0|0|NECI, New Establishment Causes.? This must be set to "1" if you want to support very early assignment (VEA).? It can be set to "1" even if you do not use VEA, so you might as well leave it as "1".? See GSM 04.08 10.5.2.4, Table 10.5.23 and 04.08 9.1.8, Table 9.9 and the Control.VEA parameter. GSM.CellSelection.Neighbors|NULL|0|0|ARFCNs of neighboring cells. GSM.CellSelection.RXLEV-ACCESS-MIN|0|0|0|Cell selection parameters.? See GSM 04.08 10.5.2.4. GSM.Channels.C1sFirst||1|0|If not NULL, allocate C-I slots first, starting at C0T1.? Otherwise, allocate C-VII slots first.? Static. GSM.Channels.NumC1s|7|1|0|Number of Combination-I timeslots to configure.? The C-I slot carries a single full-rate TCH, used for speech calling.? Static. GSM.Channels.NumC7s|0|1|0|Number of Combination-VII timeslots to configure.? The C-VII slot carries 8 SDCCHs, useful to handle high registration loads or SMS.? If C0T0 is C-IV, you must have at least one C-VII also.? Static. GSM.Control.GPRSMaxIgnore|5|0|1|The maximum number of suspension requests to ignore before aborting a transaction. GSM.Identity.BSIC.BCC|2|0|0|GSM basestation color code; lower 3 bits of the BSIC.? BCC values in a multi-BTS network should be assigned so that BTS units with overlapping coverage do not share a BCC.? This value will also select the training sequence used for all slots on this unit. GSM.Identity.BSIC.NCC|0|0|0|GSM network color code; upper 3 bits of the BSIC.? Assigned by your national regulator.? Must be distinct from NCCs of other GSM operators in your area. GSM.Identity.CI|10|0|0|Cell ID, 16 bits.? Should be unique. GSM.Identity.LAC|1000|0|0|Location area code, 16 bits, values 0xFFxx are reserved.? For multi-BTS networks, assign a unique LAC to each BTS unit.? (That is not the normal procedure in conventional GSM networks, but is the correct procedure in OpenBTS networks.) GSM.Identity.MCC|001|0|0|Mobile country code, 2 or 3 digits.? Defined in ITU-T E.212. GSM.Identity.MNC|01|0|0|Mobile network code; Must be 3 dgits.? Assigned by your national regulator. GSM.Identity.ShortName|OpenBTS|0|1|Network short name, displayed on some phones.? Optional but must be defined if you also want the network to send time-of-day. GSM.Identity.ShowCountry|1|0|0|If not NULL, tell the phone to show the country name based on the MCC. GSM.MS.Power.Damping|50|0|0|Damping value for MS power control loop. GSM.MS.Power.Max|33|0|0|Maximum commanded MS power level in dBm. GSM.MS.Power.Min|5|0|0|Minimum commanded MS power level in dBm. GSM.MS.TA.Damping|50|0|0|Damping value for timing advance control loop. GSM.MS.TA.Max|5|0|0|Maximum allowed timing advance in symbol periods.? Ignore RACH bursts with delays greater than this.? Can be used to limit service range. GSM.MaxSpeechLatency|2|0|0|Maximum allowed speech buffering latency, in 20 ms frames.? If the jitter is larger than this delay, frames will be lost. GSM.RACH.AC|1024|0|0|Access class flags.? This is the raw parameter sent on the BCCH.? See GSM 04.08 10.5.2.29 for encoding.? Set to 0 to allow full access.? If you do not have proper PSAP integration, set to 0x0400 to indicate no support for emergency calls. GSM.RACH.MaxRetrans|3|0|0|Maximum RACH retransmission attempts.? This is the raw parameter sent on the BCCH.? See GSM 04.08 10.5.2.29 for encoding. GSM.RACH.TxInteger|8|0|0|Parameter to spread RACH busts over time.? This is the raw parameter sent on the BCCH.? See GSM 04.08 10.5.2.29 for encoding. GSM.Radio.ARFCNs|1 |1|0|The number of ARFCNs to use.? The ARFCN set will be C0, C0+2, C0+4, etc.? Static. GSM.RADIO-LINK-TIMEOUT|15|0|0| L1 radio link timeout.? This is the raw parameter sent on the BCCH; see GSM 10.5.2.3 for encoding. Should be coordinated with T3109. GSM.RRLP.ACCURACY|40|0|0|Requested accuracy of location request. K in 10(1.1**K-1). See 3GPP 03.32, sect 6.2 GSM.RRLP.ALMANAC.REFRESH.TIME|24.0|0|0|How often the almanac is refreshed, in hours GSM.RRLP.ALMANAC.URL|http://www.navcen.uscg.gov/?pageName=currentAlmanac&format=yuma|0|0|URL of almanac source. GSM.RRLP.EPHEMERIS.REFRESH.TIME|1.0|0|0|How often the ephemeris is refreshed, in hours. GSM.RRLP.EPHEMERIS.URL|ftp://ftp.trimble.com/pub/eph/CurRnxN.nav|0|0|URL of ephemeris source. GSM.RRLP.RESPONSETIME|4|0|0|Mobile timeout. (OpenBTS timeout is 130 sec = max response time + 2.) N in 2**N. See 3GPP 04.31 sect A.2.2.1 GSM.RRLP.SEED.ALTITUDE|0|0|0|Seed altitude in meters wrt geoidal surface. GSM.RRLP.SEED.LATITUDE|37.8720708|0|0|Seed latitude in degrees.? -90 (south pole) .. +90 (north pole) GSM.RRLP.SEED.LONGITUDE|-122.2578337|0|0|Seed longitude in degrees.? -180 (west of greenwich) .. 180 (east) GSM.RRLP.SERVER.URL|http://localhost/cgi-bin/rrlpserver.cgi|0|0|URL of RRLP server. GSM.RRLP.ALMANAC.ASSIST.PRESENT|0|0|0|1=send almanac info to mobile; 0=do not GSM.RRLP.EPHEMERIS.ASSIST.COUNT|9|0|0|number of satellites to include in navigation model GSM.Radio.Band|1800|1|0|The GSM operating band.? Valid values are 850 (GSM850), 900 (PGSM900), 1800 (DCS1800) and 1900 (PCS1900).? For most Range models, this value is dictated by the hardware and should not be changed.? Static. GSM.Radio.C0|525|1|0|The C0 ARFCN.? Also the base ARFCN for a multi-ARFCN configuration.? Static. GSM.Radio.MaxExpectedDelaySpread|1 |0|0|Expected worst-case delay spread in symbol periods, roughly 3.7 us or 1.1 km per unit. GSM.Radio.PowerManager.MaxAttenDB|10|0|0|Maximum transmitter attenuation level, in dB wrt full scale on the D/A output.? This sets the minimum power output level in the output power control loop. GSM.Radio.PowerManager.MinAttenDB|0|0|0|Minimum transmitter attenuation level, in dB wrt full scale on the D/A output.? This sets the maximum power output level in the output power control loop. GSM.Radio.PowerManager.NumSamples|10|0|0|Number of samples averaged by the output power control loop. GSM.Radio.PowerManager.Period|6000|0|0| GSM.Radio.PowerManager.SamplePeriod|2000|0|0|Sample period for the output power control loop. GSM.Radio.PowerManager.TargetT3122|5000|0|0|Target value for T3122, the random access hold-off timer, for the power control loop. GSM.Radio.RSSITarget|-50|0|0|Target uplink RSSI for MS power control loop, in dB wrt to A/D full scale.? Should be 6-10 dB above the noise floor. GSM.Radio.NeedBSIC|1|0|0|Does the Radio type require the full BSIC GSM.Timer.T3113|10000|0|0|Paging timer T3113 in ms.? This is the timeout for a handset to respond to a paging request.? This should usually be the same as SIP.Timer.B in your VoIP network. GSM.Timer.T3122Max|255000|0|0|Maximum allowed value for T3122, the RACH holdoff timer, in milliseconds. GSM.Timer.T3122Min|2000|0|0|Minimum allowed value for T3122, the RACH holdoff timer, in milliseconds. GSM.Timer.T3212|30|0|0|Registration timer T3212 period in minutes.? Should be a factor of 6.? Set to 0 to disable periodic registration.? Should be smaller than SIP registration period. Log.Alarms.Max|20|0|0|Maximum number of alarms to remember inside the application. Log.Level.CallControl.cpp|INFO|0|1|Default configuration logs a trace at L3. Log.Level.MobilityManagement.cpp|INFO|0|1|Default configuration logs a trace at L3. Log.Level.RadioResource.cpp|INFO|0|1|Default configuration logs a trace at L3. Log.Level.SMSControl.cpp|INFO|0|1|Default configuration logs a trace at L3. NTP.Server|pool.ntp.org|0|1|NTP server(s) for time-of-day clock syncing.? For multiple servers, use a space-delimited list.? If left undefined, NTP will not be used, but it is strongly recommended. RTP.Range|98|1|0|Range of RTP port pool.? Pool is RTP.Start to RTP.Range-1.? Static. RTP.Start|16484|1|0|Base of RTP port pool.? Pool is RTP.Start to RTP.Range-1.? Static. SIP.RFC3428.NoTrying|0|0|1|If NULL or 0, send 100 Trying response to SIP MESSAGE, even though that violates RFC-3428. In other words, to actually comply with the RFC, set this to something other than NULL or 0 SIP.DTMF.RFC2833|1|0|1|If not NULL, use RFC-2833 (RTP event signalling) for in-call DTMF. SIP.DTMF.RFC2833.PayloadType|101|0|1|Payload type to use for RFC-2833 telephone event packets.? If SIP.DTMF.2833 is defined, this must also be defined. SIP.DTMF.RFC2967||0|1|If not NULL, use RFC-2967 (SIP INFO method) for in-call DTMF. SIP.Local.IP|127.0.0.1|1|0|IP address of the OpenBTS machine as seen by its proxies.? If these are all local, this can be localhost.? Static. SIP.Local.Port|5062|1|0|IP port that OpenBTS uses for its SIP interface.? Static. SIP.MaxForwards|5|0|0|Maximum allowed number of referrals. SIP.Proxy.Registration|127.0.0.1:5064|0|0|The IP host and port of the proxy to be used for registration and authentication.? This should normally be the subscriber registry SIP interface, not Asterisk. SIP.Proxy.SMS|127.0.0.1:5063|0|0|The IP host and port of the proxy to be used for text messaging.? This is smqueue, for example. SIP.Proxy.Speech|127.0.0.1:5060|0|0|The IP host and port of the proxy to be used for normal speech calls.? This is Asterisk, for example. SIP.RegistrationPeriod|90|0|0|Registration period in minutes for MS SIP users.? Should be longer than GSM T3212. SIP.SMSC|smsc|0|1|The SMSC handler in smqueue.? This is the entity that handles full 3GPP MIME-encapsulted TPDUs.? If not defined, use direct numeric addressing.? Normally the value is NULL if SMS.MIMIEType is "text/plain" or "smsc" if SMS.MIMEType is "application/vnd.3gpp". SIP.Timer.A|500|0|0|INVITE retransmit period in ms. SIP.Timer.B|10000|0|0|INVITE transaction timeout in ms.? This value should usually match GSM.Timer.T3113. SIP.Timer.E|500|0|0|Non-INVITE initial request retransmit period in ms. SIP.Timer.F|5000|0|0|Non-INVITE initial request timeout in ms. SIP.Timer.J|500|0|0|Non-INVITE non-initial request retransmit period in ms. SIP.Timer.H|5000|0|0|ACK timeout period in ms. SIP.Timer.I|500|0|0|ACK retransmit period in ms. SMS.DefaultDestSMSC|0000|0|0|Use this to fill in L4 SMSC address in SMS submission. SMS.FakeSrcSMSC|0000|0|0|Use this to fill in L4 SMSC address in SMS delivery. SMS.MIMEType|application/vnd.3gpp.sms|0|0|This is the MIME Type that OpenBTS will use for RFC-3428 SIP MESSAGE payloads.? Valid values are "application/vnd.3gpp.sms" and "text/plain". SubscriberRegistry.Manager.Title|Subscriber Registry|0|0|Title of subscriber registry database manager web page. SubscriberRegistry.Manager.Url|http://127.0.0.1/cgi/srmanager.cgi|0|0|URL of the subscriber registry database manager. SubscriberRegistry.Manager.VisibleColumns|name username type context host|0|0|Field names in subscriber registry visible in the database manager. SubscriberRegistry.db|/var/lib/asterisk/sqlite3dir/sqlite3.db|0|0|The location of the sqlite3 database holding the subscriber registry. SubscriberRegistry.Port|5064|0|0|Port used by the SIP Authentication Server. NOTE: In some older releases (pre-2.8.1) this is called SIP.myPort. TRX.IP|127.0.0.1|1|0|IP address of the transceiver application.? Static. TRX.Port|5700|1|0|IP port of the transceiver application.? Static. TRX.RadioFrequencyOffset|128|1|0|Fine-tuning adjustment for the transceiver master clock.? Roughly 170 Hz/step.? Set at the factory.? Do not adjust without proper calibration.? Static. TRX.Timeout.Clock|10|0|1|How long to wait during a read operation from the transceiver before giving up. TRX.Timeout.Start|2|0|1|How long to wait during system startup before checking to see if the transceiver can be reached. TRX.TxAttenOffset|2|1|0|Hardware-specific gain adjustment for transmitter, matched to the power amplifier, expessed as an attenuationi in dB.? Set at the factory.? Do not adjust without proper calibration.? Static. Control.Reporting.StatsTable|/var/log/OpenBTSStats.db|0|1| MNC|02|0|1| GSM.Radio.RxGain|47|0|1| Log.Level|WARNING|0|1| root at bt:~# -------------- next part -------------- An HTML attachment was scrubbed... URL: From edachleger at yahoo.com Sun Mar 17 11:07:15 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Sun, 17 Mar 2013 11:07:15 +0000 (GMT) Subject: debug-log In-Reply-To: <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> Message-ID: <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> Hi list, below is the debug-log. It seems quite normal but something is surely wrong somewhere since phones cannot see the network. Are there any obvious errors in it? regard erich tail -f messages oot at bt:/var/log# tail -f messages Mar 17 09:48:05 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 6 Mar 17 09:48:11 bt openbts: INFO 3043371888 PowerManager.cpp:49:increasePower: power increased to -5 dB Mar 17 09:48:11 bt openbts: INFO 3043371888 TRXManager.cpp:260:sendCommandPacket: command CMD SETPOWER 5 Mar 17 09:48:11 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 5 Mar 17 09:48:17 bt openbts: INFO 3043371888 PowerManager.cpp:49:increasePower: power increased to -4 dB Mar 17 09:48:17 bt openbts: INFO 3043371888 TRXManager.cpp:260:sendCommandPacket: command CMD SETPOWER 4 Mar 17 09:48:17 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 4 Mar 17 09:48:23 bt openbts: INFO 3043371888 PowerManager.cpp:49:increasePower: power increased to -3 dB Mar 17 09:48:23 bt openbts: INFO 3043371888 TRXManager.cpp:260:sendCommandPacket: command CMD SETPOWER 3 Mar 17 09:48:23 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 3 root at bt:/var/log# tail -f user.log Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:333:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:335:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:337:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:109:regenerateBeacon: mSI3Frame primitive=DATA raw=(49061b000a00f11003e85100052f6040e104002b2b2b2b) Mar 17 09:47:11 bt OpenBTS: INFO 3074303696 GSMConfig.cpp:113:regenerateBeacon: RR System Information Type 4 LAI=(MCC=001 MNC=01 LAC=0x3e8) cellSelectionParameters=(CELL-RESELECT-HYSTERESIS=3 MS-TXPWR-MAX-CCH=0 ACS=0 NECI=1 RXLEV-ACCESS-MIN=0) RACHControlParameters=(maxRetrans=3 txInteger=8 cellBarAccess=0 RE=1 AC=0x400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:118:regenerateBeacon: mSI4Frame primitive=DATA raw=(31061c00f11003e86040e104002b2b2b2b2b2b2b2b2b2b) Mar 17 09:47:11 bt OpenBTS: INFO 3074303696 GSMConfig.cpp:122:regenerateBeacon: RR System Information Type 5 BCCHFrequencyList=(EXT-IND=0 BA-IND=0? ARFCNs=(0 )) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:124:regenerateBeacon: mSI5Frame primitive=UNIT_DATA raw=(061d8e000000000000000000000000000000) Mar 17 09:47:11 bt OpenBTS: INFO 3074303696 GSMConfig.cpp:128:regenerateBeacon: RR System Information Type 6 CI=10 LAI=(MCC=001 MNC=01 LAC=0x3e8) cellOptions=(PWRC=0 DTX=2 RADIO_LINK_TIMEOUT=15) NCCPermitted=(0x1) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:130:regenerateBeacon: mSI6Frame primitive=UNIT_DATA raw=(061e000a00f11003e82f01) root at bt:/var/log# tail -f debug Mar 17 09:48:27 bt openbts: DEBUG 3046034288 GSML1FEC.cpp:277:resync: obj: 0x859f150 L1Encoder next=6:1493973 now=0:1493973 delta=0 Mar 17 09:48:27 bt openbts: DEBUG 3053755248 GSMLogicalChannel.cpp:243:serviceLoop: obj: 0x85872c0 SACCH sleeping Mar 17 09:48:27 bt openbts: DEBUG 3046300528 GSMLogicalChannel.cpp:243:serviceLoop: obj: 0x85a37a0 SACCH sleeping Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:943:generate: obj: 0x8560060 SCHL1Encoder 0:1493984 Mar 17 09:48:27 bt openbts: DEBUG 3064671088 TRXManager.cpp:181:writeHighSide: transmit at time 0:1493974: time=0:1493984 data=(0000011011110000110001010111101011100000101011100101100010000001000000111100101101010001010111011000011011011001001111110000001101000110101110011000) Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:277:resync: obj: 0x8560060 L1Encoder next=0:1493995 now=0:1493974 delta=21 Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:943:generate: obj: 0x8560060 SCHL1Encoder 0:1493995 Mar 17 09:48:27 bt openbts: DEBUG 3064671088 TRXManager.cpp:181:writeHighSide: transmit at time 0:1493984: time=0:1493995 data=(0000011011110000110001010111101011100111101011100101100010000001000000111100101101010001010111011000011011100001000110010100101111001100000110000000) Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:277:resync: obj: 0x8560060 L1Encoder next=0:1494005 now=0:1493984 delta=21 Mar 17 09:48:27 bt openbts: DEBUG 3051891568 GSMLogicalChannel.cpp:243:serviceLoop: obj: 0x8590a40 SACCH sleeping root at bt:/var/log# cat debug | grep OpenBTS Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:91:regenerateBeacon: mSI1Frame primitive=DATA raw=(5506198e000000000000000000000000000000e104002b) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:100:regenerateBeacon: mSI2Frame primitive=DATA raw=(59061a8e00000000000000000000000000000001e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:323:writeBody: primitive=UNIT_DATA raw=(061b554f9a21d5781da5b153bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:325:writeBody: primitive=UNIT_DATA raw=(061b000a9a21d5781da5b153bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:327:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e8a5b153bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:329:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e8510005bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:331:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052fad39af3152) tail -f messages oot at bt:/var/log# tail -f messages Mar 17 09:48:05 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 6 Mar 17 09:48:11 bt openbts: INFO 3043371888 PowerManager.cpp:49:increasePower: power increased to -5 dB Mar 17 09:48:11 bt openbts: INFO 3043371888 TRXManager.cpp:260:sendCommandPacket: command CMD SETPOWER 5 Mar 17 09:48:11 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 5 Mar 17 09:48:17 bt openbts: INFO 3043371888 PowerManager.cpp:49:increasePower: power increased to -4 dB Mar 17 09:48:17 bt openbts: INFO 3043371888 TRXManager.cpp:260:sendCommandPacket: command CMD SETPOWER 4 Mar 17 09:48:17 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 4 Mar 17 09:48:23 bt openbts: INFO 3043371888 PowerManager.cpp:49:increasePower: power increased to -3 dB Mar 17 09:48:23 bt openbts: INFO 3043371888 TRXManager.cpp:260:sendCommandPacket: command CMD SETPOWER 3 Mar 17 09:48:23 bt openbts: INFO 3043371888 TRXManager.cpp:274:sendCommandPacket: response RSP SETPOWER 0 3 root at bt:/var/log# tail -f user.log Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:333:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:335:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:337:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:109:regenerateBeacon: mSI3Frame primitive=DATA raw=(49061b000a00f11003e85100052f6040e104002b2b2b2b) Mar 17 09:47:11 bt OpenBTS: INFO 3074303696 GSMConfig.cpp:113:regenerateBeacon: RR System Information Type 4 LAI=(MCC=001 MNC=01 LAC=0x3e8) cellSelectionParameters=(CELL-RESELECT-HYSTERESIS=3 MS-TXPWR-MAX-CCH=0 ACS=0 NECI=1 RXLEV-ACCESS-MIN=0) RACHControlParameters=(maxRetrans=3 txInteger=8 cellBarAccess=0 RE=1 AC=0x400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:118:regenerateBeacon: mSI4Frame primitive=DATA raw=(31061c00f11003e86040e104002b2b2b2b2b2b2b2b2b2b) Mar 17 09:47:11 bt OpenBTS: INFO 3074303696 GSMConfig.cpp:122:regenerateBeacon: RR System Information Type 5 BCCHFrequencyList=(EXT-IND=0 BA-IND=0? ARFCNs=(0 )) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:124:regenerateBeacon: mSI5Frame primitive=UNIT_DATA raw=(061d8e000000000000000000000000000000) Mar 17 09:47:11 bt OpenBTS: INFO 3074303696 GSMConfig.cpp:128:regenerateBeacon: RR System Information Type 6 CI=10 LAI=(MCC=001 MNC=01 LAC=0x3e8) cellOptions=(PWRC=0 DTX=2 RADIO_LINK_TIMEOUT=15) NCCPermitted=(0x1) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:130:regenerateBeacon: mSI6Frame primitive=UNIT_DATA raw=(061e000a00f11003e82f01) root at bt:/var/log# tail -f debug Mar 17 09:48:27 bt openbts: DEBUG 3046034288 GSML1FEC.cpp:277:resync: obj: 0x859f150 L1Encoder next=6:1493973 now=0:1493973 delta=0 Mar 17 09:48:27 bt openbts: DEBUG 3053755248 GSMLogicalChannel.cpp:243:serviceLoop: obj: 0x85872c0 SACCH sleeping Mar 17 09:48:27 bt openbts: DEBUG 3046300528 GSMLogicalChannel.cpp:243:serviceLoop: obj: 0x85a37a0 SACCH sleeping Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:943:generate: obj: 0x8560060 SCHL1Encoder 0:1493984 Mar 17 09:48:27 bt openbts: DEBUG 3064671088 TRXManager.cpp:181:writeHighSide: transmit at time 0:1493974: time=0:1493984 data=(0000011011110000110001010111101011100000101011100101100010000001000000111100101101010001010111011000011011011001001111110000001101000110101110011000) Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:277:resync: obj: 0x8560060 L1Encoder next=0:1493995 now=0:1493974 delta=21 Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:943:generate: obj: 0x8560060 SCHL1Encoder 0:1493995 Mar 17 09:48:27 bt openbts: DEBUG 3064671088 TRXManager.cpp:181:writeHighSide: transmit at time 0:1493984: time=0:1493995 data=(0000011011110000110001010111101011100111101011100101100010000001000000111100101101010001010111011000011011100001000110010100101111001100000110000000) Mar 17 09:48:27 bt openbts: DEBUG 3064671088 GSML1FEC.cpp:277:resync: obj: 0x8560060 L1Encoder next=0:1494005 now=0:1493984 delta=21 Mar 17 09:48:27 bt openbts: DEBUG 3051891568 GSMLogicalChannel.cpp:243:serviceLoop: obj: 0x8590a40 SACCH sleeping root at bt:/var/log# cat debug | grep OpenBTS Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:91:regenerateBeacon: mSI1Frame primitive=DATA raw=(5506198e000000000000000000000000000000e104002b) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:100:regenerateBeacon: mSI2Frame primitive=DATA raw=(59061a8e00000000000000000000000000000001e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:323:writeBody: primitive=UNIT_DATA raw=(061b554f9a21d5781da5b153bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:325:writeBody: primitive=UNIT_DATA raw=(061b000a9a21d5781da5b153bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:327:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e8a5b153bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:329:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e8510005bcad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:331:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052fad39af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:333:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040af3152) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:335:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSML3RRMessages.cpp:337:writeBody: primitive=UNIT_DATA raw=(061b000a00f11003e85100052f6040e10400) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:109:regenerateBeacon: mSI3Frame primitive=DATA raw=(49061b000a00f11003e85100052f6040e104002b2b2b2b) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:118:regenerateBeacon: mSI4Frame primitive=DATA raw=(31061c00f11003e86040e104002b2b2b2b2b2b2b2b2b2b) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:124:regenerateBeacon: mSI5Frame primitive=UNIT_DATA raw=(061d8e000000000000000000000000000000) Mar 17 09:47:11 bt OpenBTS: DEBUG 3074303696 GSMConfig.cpp:130:regenerateBeacon: mSI6Frame primitive=UNIT_DATA raw=(061e000a00f11003e82f01) Mar 17 11:37:51 bt OpenBTS: DEBUG 3074131664 GSMConfig.cpp:124:regenerateBeacon: mSI5Frame primitive=UNIT_DATA raw=(061d8e000000000000000000000000000000) Mar 17 11:37:51 bt OpenBTS: INFO 3074131664 GSMConfig.cpp:128:regenerateBeacon: RR System Information Type 6 CI=10 LAI=(MCC=001 MNC=01 LAC=0x3e8) cellOptions=(PWRC=0 DTX=2 RADIO_LINK_TIMEOUT=15) NCCPermitted=(0x1) Mar 17 11:37:51 bt OpenBTS: DEBUG 3074131664 GSMConfig.cpp:130:regenerateBeacon: mSI6Frame primitive=UNIT_DATA raw=(061e000a00f11003e82f01) Mar 17 11:37:51 bt openbts: ALERT 3074131664 OpenBTS.cpp:310:main: OpenBTS starting, ver P2.8TRUNK build date Feb 26 2013 Mar 17 11:37:51 bt openbts: INFO 3074131664 OpenBTS.cpp:324:main: checking transceiver Mar 17 11:37:56 bt openbts: NOTICE 3073956720 OpenBTS.cpp:121:startTransceiver: starting transceiver ./transceiver 1 Mar 17 11:38:01 bt openbts: INFO 3074131664 OpenBTS.cpp:362:main: tuning TRX 0 to ARFCN 650 Mar 17 11:38:01 bt openbts: INFO 3074131664 OpenBTS.cpp:504:main: system ready Mar 15 10:36:29 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 10:36:29 bt sipauthserve: ALERT 3073963728 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 15 19:21:36 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 19:21:36 bt sipauthserve: ALERT 3074111184 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 15 19:36:46 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 19:36:46 bt sipauthserve: ALERT 3074221776 sipauthserve.cpp:214:main: ./sipauthserve (re)starting Mar 15 22:00:43 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 22:00:43 bt sipauthserve: ALERT 3074447056 sipauthserve.cpp:214:main: ./sipauthserve (re)starting Mar 15 22:06:50 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 22:06:50 bt sipauthserve: ALERT 3073894096 sipauthserve.cpp:214:main: ./sipauthserve (re)starting Mar 15 22:11:12 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 22:11:12 bt sipauthserve: ALERT 3073648336 sipauthserve.cpp:214:main: ./sipauthserve (re)starting Mar 15 22:15:52 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 15 22:15:52 bt sipauthserve: ALERT 3074062032 sipauthserve.cpp:214:main: ./sipauthserve (re)starting Mar 16 11:04:18 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 16 11:04:18 bt sipauthserve: ALERT 3074668240 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 16 13:02:47 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 16 13:02:47 bt sipauthserve: ALERT 3073836752 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 16 13:08:59 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 16 13:08:59 bt sipauthserve: ALERT 3074381520 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 17 09:40:38 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 17 09:40:38 bt sipauthserve: ALERT 3073799888 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 17 09:47:10 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 17 09:47:10 bt sipauthserve: ALERT 3074336464 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 17 11:37:51 bt sipauthserve: opening configuration table from path /etc/OpenBTS/sipauthserve.db Mar 17 11:37:51 bt sipauthserve: ALERT 3073787600 sipauthserve.cpp:214:main: /root/openBts/public/subscriberRegistry/trunk/sipauthserve (re)starting Mar 17 11:37:51 bt sipauthserve: INFO 3073787600 SubscriberRegistry.cpp:275:getCLIDLocal: getCLIDLocal(IMSI001010000000000) Mar 17 11:37:51 bt sipauthserve: INFO 3073787600 SubscriberRegistry.cpp:199:sqlLocal: select callerid from sip_buddies where name = "IMSI001010000000000" Mar 17 11:37:51 bt sipauthserve: INFO 3073787600 SubscriberRegistry.cpp:239:sqlQuery: result = 2100 Mar 17 11:37:51 bt sipauthserve: NOTICE 3073787600 sipauthserve.cpp:241:main: binding on port 5064 ________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: From edachleger at yahoo.com Wed Mar 20 14:17:26 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Wed, 20 Mar 2013 14:17:26 +0000 (GMT) Subject: debug-log In-Reply-To: <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> Message-ID: <1363789046.87110.YahooMailNeo@web171205.mail.ir2.yahoo.com> ________________________________ Hi List, I removed and recompiled both osmocom-bb and openbts buth the errors still are there, however the neigbor_req messages now are gone. I suspect there is some mistake in my firmware-upload process since I get: -------- L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1, flags=0x7) Starting FCCH RecognitionFB0 (655:3): TOA= 2736, Power= -66dBm, Angle=-6220Hz FB1 (665:8): TOA= 8979, Power= -65dBm, Angle= -448Hz ? fn_offset=664 (fn=665 + attempt=8 + ntdma = 7) ? delay=9 (fn_offset=664 + 11 - fn=665 - 1 ? scheduling next FB/SB detection task with delay 9 =>FB @ FNR 664 fn_offset=664 qbits=732 Synchronize_TDMA LOST 2178! SB1 (1334:1): TOA=?? 24, Power= -67dBm, Angle=? -49Hz => SB 0x01b9eff2: BSIC=60 fn=1993876(1503/14/31) qbits=4 Synchronize_TDMA =>FB @ FNR 1333 fn_offset=1993876 qbits=4912 LOST 1905! BAT-ADC: 564?? 3?? 0?? 0 1023 389 363 226 ------------------------------- I have tried disabling the size check on line 271 in osmocon.c in testing-branch but that did not remove the L1CTL-RESET_REC:FULL! message. I also note that I still get a Framburst synchronisation burst detection task with delay 9,althoug switching reference cell. The network can still not be detected by other phones. I use c118 with cp2102 usb to serial-adapter. Does some adjustment have to be made with respect to the noise floor? osmocon-log: root at bt:~/osmocom-bb/src/host/osmocon# ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../../target/firmware/board/compal_e88/trx.highram.bin ../../target/firmware/board/compal_e88/chainload.compalram.bin got 2 bytes from modem, data looks like: 00 02? .. got 2 bytes from modem, data looks like: 04 81? .. got 3 bytes from modem, data looks like: 1b f6 02? ... got 1 bytes from modem, data looks like: 00? . got 1 bytes from modem, data looks like: 41? A got 1 bytes from modem, data looks like: 01? . got 1 bytes from modem, data looks like: 40? @ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/chainload.compalram.bin): file_size=4346, hdr_len=4, dnload_len=4353 got 1 bytes from modem, data looks like: 1b? . got 1 bytes from modem, data looks like: f6? . got 1 bytes from modem, data looks like: 02? . got 1 bytes from modem, data looks like: 00? . got 1 bytes from modem, data looks like: 41? A got 1 bytes from modem, data looks like: 02? . got 1 bytes from modem, data looks like: 43? C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/4353) handle_write(): 257 bytes (4353/4353) handle_write(): finished got 1 bytes from modem, data looks like: 1b? . got 1 bytes from modem, data looks like: f6? . got 1 bytes from modem, data looks like: 02? . got 1 bytes from modem, data looks like: 00? . got 1 bytes from modem, data looks like: 41? A got 1 bytes from modem, data looks like: 03? . got 1 bytes from modem, data looks like: 42? B Received DOWNLOAD ACK from phone, your code is running now! Enabled Compal ramloader -> Calypso romloader chainloading mode Received ident ack from phone, sending parameter sequence read_file(../../target/firmware/board/compal_e88/trx.highram.bin): file_size=62964, hdr_len=0, dnload_len=62967 Received parameter ack from phone, starting download Finished, sent 63 blocks in total Received branch ack, your code is running now! battery_compal_e88_init: starting up OSMOCOM TRX (revision osmocon_v0.0.0-1747-geeafd9f-modified) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: 0dd7253ccb039bd6 ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== Assert DSP into Reset Releasing DSP from Reset Installing DSP extensions patch Setting some dsp_api.ndb values Setting API NDB parameters Finishing download phase DSP Download Status: 0x0002 DSP API Version: 0x3606 0x0000 LOST 254! L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=32, flags=0x7) Starting FCCH RecognitionFB0 (848:2): TOA= 2160, Power= -71dBm, Angle=-6215Hz FB1 (859:9): TOA=10879, Power= -72dBm, Angle= -416Hz ? fn_offset=858 (fn=859 + attempt=9 + ntdma = 8) ? delay=9 (fn_offset=858 + 11 - fn=859 - 1 ? scheduling next FB/SB detection task with delay 9 =>FB @ FNR 858 fn_offset=858 qbits=3332 Synchronize_TDMA LOST 3153! SB1 (1721:1): TOA=?? 28, Power= -71dBm, Angle= -197Hz => SB 0x0128caed: BSIC=59 fn=1214678(916/10/11) qbits=20 Synchronize_TDMA =>FB @ FNR 1720 fn_offset=1214678 qbits=4928 LOST 1911! BAT-ADC: 564?? 3?? 0?? 0 1023 387 362 223 ??? Charger at 26 mV. ??? Battery at 3856 mV. ??? Charging at 0 mA. ??? Battery capacity is 82%. ??? Battery range is 3199..3999 mV. ??? Battery full at 468 LSB .. full at 585 LSB ??? Charging at 239 LSB (204 mA). ??? BCICTL2=0x3ff ??? battery-info.flags=0x00000000 ??? bat_compal_e88_chg_state=0 BTS MODE: 2 652 STALE BURST 1215693 STALE BURST 1215694 STALE BURST 1215695 STALE BURST 1215696 STALE BURST 1215699 STALE BURST 1215700 BAT-ADC: 557?? 3?? 0?? 0 1023 388 363 226 ??? Charger at 26 mV. ??? Battery at 3808 mV. ??? Charging at 0 mA. ??? Battery capacity is 76%. ??? Battery range is 3199..3999 mV. ??? Battery full at 468 LSB .. full at 585 LSB ??? Charging at 239 LSB (204 mA). ??? BCICTL2=0x3ff ??? battery-info.flags=0x00000000 ??? bat_compal_e88_chg_state=0 TOA AVG is not 16 qbits, correcting (got 20) BAT-ADC: 563?? 3?? 0?? 0 1023 388 363 226 [2]+? Stopped?????? -------------- next part -------------- An HTML attachment was scrubbed... URL: From 246tnt at gmail.com Wed Mar 20 14:46:12 2013 From: 246tnt at gmail.com (Sylvain Munaut) Date: Wed, 20 Mar 2013 15:46:12 +0100 Subject: debug-log In-Reply-To: <1363789046.87110.YahooMailNeo@web171205.mail.ir2.yahoo.com> References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> <1363789046.87110.YahooMailNeo@web171205.mail.ir2.yahoo.com> Message-ID: > I removed and recompiled both osmocom-bb and openbts buth the errors still > are there, What errors ? I don't see anything abnormal in the output you posted ... Why can't you see the network ? I have _no_ idea ... As I said in the talk, you can have it all working on the software side and still not see the network, it might be linked to the phone, the reference cell, your RF environment, your test phones, and a zillion other things and without proper BTS tester gear and the knowledge to debug it, you might never find out. A few random tips: - Let the BTS phone powered on for like 10 min before launching transceiver and openbts, this lets the crystal warmup and it'll be more stable - The phone you're trying to register must not be too close from the bts phone, at least 5m away or so. Cheers, Sylvain From edachleger at yahoo.com Fri Mar 29 16:19:44 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Fri, 29 Mar 2013 16:19:44 +0000 (GMT) Subject: osmocom-transceiver In-Reply-To: References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> <1363789046.87110.YahooMailNeo@web171205.mail.ir2.yahoo.com> Message-ID: <1364573984.99839.YahooMailNeo@web171204.mail.ir2.yahoo.com> ________________________________ Hi List, Does one have to build an osmocom-specific-transceiver inside openbts/trunk directory in addition to the installment-procedure for the trx-app described in the wiki? I did not put anything extra in openbts/trunk directory. However when I run noise command from OpenBTSCLI I get -0 db for the noise floor, after starting OpenBTS, so I suspect there possibly is an error with my transceiver-install.I increased Ms rssi target with +10 db as suggested in openbts-wiki, but that did not make the net visible for other? phones. cheers erich ----------------------------- output from OpenBTS> stats ------------------------------- OpenBTS> stats OpenBTS.Starts: 129 events over 41719 minutes OpenBTS.Exit.Normal.CLI: 324 events over 41719 minutes OpenBTS.Exit.Error.Watchdog: 0 events over 41719 minutes OpenBTS.Exit.Error.CLISocket: 0 events over 41719 minutes OpenBTS.Exit.Error.TransceiverHeartbeat: 96 events over 41719 minutes OpenBTS.Exit.Error.ConfigurationParameterNotFound: 0 events over 41719 minutes OpenBTS.CLI.Command: 325 events over 41719 minutes OpenBTS.CLI.Command.ResponseFailure: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.3xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.4xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.5xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.6xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.xxx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Local: 0 events over 41719 minutes OpenBTS.SIP.ReadTimeout: 0 events over 41719 minutes OpenBTS.SIP.LostProxy: 0 events over 41719 minutes OpenBTS.SIP.UnresolvedHostname: 0 events over 41719 minutes OpenBTS.SIP.INVITE.In: 0 events over 41719 OpenBTS.GSM.RR.RACH.TA.Accepted.0: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.1: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.2: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.3: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.4: 0 ---------------- parts of output from ./openBTS --------------------- 0011> trx.c:512 TRX Data 179115:0:0:018a122916244ae0428548042a4480 <0011> trx.c:512 TRX Data 179116:0:0:14a01404481448700a10a010804aa0 <0011> trx.c:512 TRX Data 179117:0:0:4421420408540070a810001a212280 <0011> trx.c:419 TRX Control recv: |SETPOWER|5| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 5| <0011> trx.c:190 TRX CLK Indication 179114 0011> trx.c:190 TRX CLK Indication 180389 <0011> trx.c:512 TRX Data 180440:0:0:8bc274073a3d00fef0b44342d71a20 <0011> trx.c:512 TRX Data 180441:0:0:61abea10427ec2f0cb524c0b88ec30 <0011> trx.c:419 TRX Control recv: |SETPOWER|4| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 4| <0011> trx.c:512 TRX D 0011> trx.c:419 TRX Control recv: |SETPOWER|3| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 3| <0011> trx.c:190 TRX CLK Indication 181715 <0011> trx.c:512 TRX 011> trx.c:419 TRX Control recv: |SETPOWER|2| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 2| <0011> trx.c:190 TRX CLK Indication 183041 ----------------- ------------------ ----------------------------- openbt/trunk_directory ---------------------------- root at bt:~/openBts/public/openbts/trunk/apps# ls -la total 8240 drwxr-xr-x? 5 root root??? 4096 2013-03-17 23:27 . drwxr-xr-x 22 root root??? 4096 2013-03-17 23:02 .. drwxr-xr-x? 2 root root??? 4096 2013-03-17 23:08 .deps -rw-r--r--? 1 root root??? 1557 2013-03-15 19:36 fil2 drwxr-xr-x? 2 root root??? 4096 2013-03-17 23:08 .libs -rw-r--r--? 1 root root?? 19385 2013-03-17 23:02 Makefile -rw-r--r--? 1 root root??? 1364 2013-02-26 11:19 Makefile.am -rw-r--r--? 1 root root?? 19852 2013-03-17 23:01 Makefile.in -rwxr-xr-x? 1 root root 7699820 2013-03-17 23:08 OpenBTS -rwxr-xr-x? 1 root root?? 17792 2013-03-17 23:08 OpenBTSCLI -rw-r--r--? 1 root root??? 4401 2013-02-26 11:19 OpenBTSCLI.cpp -rw-r--r--? 1 root root?? 11204 2013-03-17 23:08 OpenBTSCLI.o -rw-r--r--? 1 root root?? 18084 2013-02-26 11:19 OpenBTS.cpp -rwxr-xr-x? 1 root root?? 12252 2013-03-17 23:08 OpenBTSDo -rw-r--r--? 1 root root??? 2367 2013-02-26 11:19 OpenBTSDo.cpp -rw-r--r--? 1 root root??? 8172 2013-03-17 23:08 OpenBTSDo.o -rw-r--r--? 1 root root?? 21120 2013-02-26 11:19 OpenBTS.example.sql -rw-r--r--? 1 root root? 549792 2013-03-17 23:08 OpenBTS.o -rwxr-xr-x? 1 root root???? 139 2013-02-26 11:19 runloop.OpenBTS.sh drwxr-xr-x? 6 root root??? 4096 2013-02-26 11:22 .svn lrwxrwxrwx? 1 root root????? 29 2013-03-17 23:27 transceiver -> ../Transceiver52M/transceiver -rw-r--r--? 1 root root?????? 0 2013-03-01 13:53 trx.c:190 -------------- next part -------------- An HTML attachment was scrubbed... URL: From shaddi at berkeley.edu Fri Mar 29 16:46:02 2013 From: shaddi at berkeley.edu (Shaddi Hasan) Date: Fri, 29 Mar 2013 09:46:02 -0700 Subject: osmocom-transceiver In-Reply-To: <1364573984.99839.YahooMailNeo@web171204.mail.ir2.yahoo.com> References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> <1363789046.87110.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1364573984.99839.YahooMailNeo@web171204.mail.ir2.yahoo.com> Message-ID: You need to make a bash script to start the osmocom transceiver in the apps directory as described in the instructions: http://bb.osmocom.org/trac/wiki/Software/Transceiver You should delete the symlink to Transceiver52M, that's for Ettus radios. sent from a phone ------------------------------ **Hi List, Does one have to build an osmocom-specific-transceiver inside openbts/trunk directory in addition to the installment-procedure for the trx-app described in the wiki? I did not put anything extra in openbts/trunk directory. However when I run noise command from OpenBTSCLI I get -0 db for the noise floor, after starting OpenBTS, so I suspect there possibly is an error with my transceiver-install.I increased Ms rssi target with +10 db as suggested in openbts-wiki, but that did not make the net visible for other phones. cheers erich ----------------------------- output from OpenBTS> stats ------------------------------- OpenBTS> stats OpenBTS.Starts: 129 events over 41719 minutes OpenBTS.Exit.Normal.CLI: 324 events over 41719 minutes OpenBTS.Exit.Error.Watchdog: 0 events over 41719 minutes OpenBTS.Exit.Error.CLISocket: 0 events over 41719 minutes OpenBTS.Exit.Error.TransceiverHeartbeat: 96 events over 41719 minutes OpenBTS.Exit.Error.ConfigurationParameterNotFound: 0 events over 41719 minutes OpenBTS.CLI.Command: 325 events over 41719 minutes OpenBTS.CLI.Command.ResponseFailure: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.3xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.4xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.5xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.6xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.xxx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Local: 0 events over 41719 minutes OpenBTS.SIP.ReadTimeout: 0 events over 41719 minutes OpenBTS.SIP.LostProxy: 0 events over 41719 minutes OpenBTS.SIP.UnresolvedHostname: 0 events over 41719 minutes OpenBTS.SIP.INVITE.In: 0 events over 41719 OpenBTS.GSM.RR.RACH.TA.Accepted.0: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.1: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.2: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.3: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.4: 0 ---------------- parts of output from ./openBTS --------------------- 0011> trx.c:512 TRX Data 179115:0:0:018a122916244ae0428548042a4480 <0011> trx.c:512 TRX Data 179116:0:0:14a01404481448700a10a010804aa0 <0011> trx.c:512 TRX Data 179117:0:0:4421420408540070a810001a212280 <0011> trx.c:419 TRX Control recv: |SETPOWER|5| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 5| <0011> trx.c:190 TRX CLK Indication 179114 0011> trx.c:190 TRX CLK Indication 180389 <0011> trx.c:512 TRX Data 180440:0:0:8bc274073a3d00fef0b44342d71a20 <0011> trx.c:512 TRX Data 180441:0:0:61abea10427ec2f0cb524c0b88ec30 <0011> trx.c:419 TRX Control recv: |SETPOWER|4| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 4| <0011> trx.c:512 TRX D 0011> trx.c:419 TRX Control recv: |SETPOWER|3| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 3| <0011> trx.c:190 TRX CLK Indication 181715 <0011> trx.c:512 TRX 011> trx.c:419 TRX Control recv: |SETPOWER|2| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 2| <0011> trx.c:190 TRX CLK Indication 183041 ----------------- ------------------ ----------------------------- openbt/trunk_directory ---------------------------- root at bt:~/openBts/public/openbts/trunk/apps# ls -la total 8240 drwxr-xr-x 5 root root 4096 2013-03-17 23:27 . drwxr-xr-x 22 root root 4096 2013-03-17 23:02 .. drwxr-xr-x 2 root root 4096 2013-03-17 23:08 .deps -rw-r--r-- 1 root root 1557 2013-03-15 19:36 fil2 drwxr-xr-x 2 root root 4096 2013-03-17 23:08 .libs -rw-r--r-- 1 root root 19385 2013-03-17 23:02 Makefile -rw-r--r-- 1 root root 1364 2013-02-26 11:19 Makefile.am -rw-r--r-- 1 root root 19852 2013-03-17 23:01 Makefile.in -rwxr-xr-x 1 root root 7699820 2013-03-17 23:08 OpenBTS -rwxr-xr-x 1 root root 17792 2013-03-17 23:08 OpenBTSCLI -rw-r--r-- 1 root root 4401 2013-02-26 11:19 OpenBTSCLI.cpp -rw-r--r-- 1 root root 11204 2013-03-17 23:08 OpenBTSCLI.o -rw-r--r-- 1 root root 18084 2013-02-26 11:19 OpenBTS.cpp -rwxr-xr-x 1 root root 12252 2013-03-17 23:08 OpenBTSDo -rw-r--r-- 1 root root 2367 2013-02-26 11:19 OpenBTSDo.cpp -rw-r--r-- 1 root root 8172 2013-03-17 23:08 OpenBTSDo.o -rw-r--r-- 1 root root 21120 2013-02-26 11:19 OpenBTS.example.sql -rw-r--r-- 1 root root 549792 2013-03-17 23:08 OpenBTS.o -rwxr-xr-x 1 root root 139 2013-02-26 11:19 runloop.OpenBTS.sh drwxr-xr-x 6 root root 4096 2013-02-26 11:22 .svn lrwxrwxrwx 1 root root 29 2013-03-17 23:27 transceiver -> ../Transceiver52M/transceiver -rw-r--r-- 1 root root 0 2013-03-01 13:53 trx.c:190 -------------- next part -------------- An HTML attachment was scrubbed... URL: From edachleger at yahoo.com Fri Mar 29 17:38:06 2013 From: edachleger at yahoo.com (Erich Dachleger) Date: Fri, 29 Mar 2013 17:38:06 +0000 (GMT) Subject: Vedr: osmocom-transceiver In-Reply-To: References: <1362909420.71978.YahooMailNeo@web171201.mail.ir2.yahoo.com> <1362913541.56352.YahooMailNeo@web171206.mail.ir2.yahoo.com> <1363255131.19582.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1363518435.82174.YahooMailNeo@web171204.mail.ir2.yahoo.com> <1363789046.87110.YahooMailNeo@web171205.mail.ir2.yahoo.com> <1364573984.99839.YahooMailNeo@web171204.mail.ir2.yahoo.com> Message-ID: <1364578686.13985.YahooMailNeo@web171205.mail.ir2.yahoo.com> Hi Shaddi and thanks for your reply. The? file named transceiver in my apps directory contains the bash-script described in the wiki you linked. I made the symlink between that file and the Transceiver52M just for testing today, and will remove it. But I have not had any symlinks during my earlier tests, just the bash script inside the file named transceiver,and the errors remain. Openbts kind of starts but there is a never ending sequence of trx-data messages interupted by TRX CLK indication messages in the ./OpenBTS terminal, and no network seems to be broadcasted. When watching the talk-video from 29c3 there seems to be both a transceiver file as well as a transceiver.bin? inside the apps-directory used in the talk. regards erich ________________________________ Fra: Shaddi Hasan Til: Erich Dachleger Kopi: baseband-devel at lists.osmocom.org; Sylvain Munaut <246tnt at gmail.com> Sendt: Fredag, 29. mars 2013 17.46 Emne: Re: osmocom-transceiver You need to make a bash script to start the osmocom transceiver in the apps directory as described in the instructions: http://bb.osmocom.org/trac/wiki/Software/Transceiver You should delete the symlink to Transceiver52M, that's for Ettus radios. sent from a phone ________________________________ Hi List, Does one have to build an osmocom-specific-transceiver inside openbts/trunk directory in addition to the installment-procedure for the trx-app described in the wiki? I did not put anything extra in openbts/trunk directory. However when I run noise command from OpenBTSCLI I get -0 db for the noise floor, after starting OpenBTS, so I suspect there possibly is an error with my transceiver-install.I increased Ms rssi target with +10 db as suggested in openbts-wiki, but that did not make the net visible for other? phones. cheers erich ----------------------------- output from OpenBTS> stats ------------------------------- OpenBTS> stats OpenBTS.Starts: 129 events over 41719 minutes OpenBTS.Exit.Normal.CLI: 324 events over 41719 minutes OpenBTS.Exit.Error.Watchdog: 0 events over 41719 minutes OpenBTS.Exit.Error.CLISocket: 0 events over 41719 minutes OpenBTS.Exit.Error.TransceiverHeartbeat: 96 events over 41719 minutes OpenBTS.Exit.Error.ConfigurationParameterNotFound: 0 events over 41719 minutes OpenBTS.CLI.Command: 325 events over 41719 minutes OpenBTS.CLI.Command.ResponseFailure: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.3xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.4xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.5xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.6xx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Remote.xxx: 0 events over 41719 minutes OpenBTS.SIP.Failed.Local: 0 events over 41719 minutes OpenBTS.SIP.ReadTimeout: 0 events over 41719 minutes OpenBTS.SIP.LostProxy: 0 events over 41719 minutes OpenBTS.SIP.UnresolvedHostname: 0 events over 41719 minutes OpenBTS.SIP.INVITE.In: 0 events over 41719 OpenBTS.GSM.RR.RACH.TA.Accepted.0: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.1: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.2: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.3: 0 events over 41719 minutes OpenBTS.GSM.RR.RACH.TA.Accepted.4: 0 ---------------- parts of output from ./openBTS --------------------- 0011> trx.c:512 TRX Data 179115:0:0:018a122916244ae0428548042a4480 <0011> trx.c:512 TRX Data 179116:0:0:14a01404481448700a10a010804aa0 <0011> trx.c:512 TRX Data 179117:0:0:4421420408540070a810001a212280 <0011> trx.c:419 TRX Control recv: |SETPOWER|5| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 5| <0011> trx.c:190 TRX CLK Indication 179114 0011> trx.c:190 TRX CLK Indication 180389 <0011> trx.c:512 TRX Data 180440:0:0:8bc274073a3d00fef0b44342d71a20 <0011> trx.c:512 TRX Data 180441:0:0:61abea10427ec2f0cb524c0b88ec30 <0011> trx.c:419 TRX Control recv: |SETPOWER|4| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 4| <0011> trx.c:512 TRX D 0011> trx.c:419 TRX Control recv: |SETPOWER|3| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 3| <0011> trx.c:190 TRX CLK Indication 181715 <0011> trx.c:512 TRX 011> trx.c:419 TRX Control recv: |SETPOWER|2| <0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 2| <0011> trx.c:190 TRX CLK Indication 183041 ----------------- ------------------ ----------------------------- openbt/trunk_directory ---------------------------- root at bt:~/openBts/public/openbts/trunk/apps# ls -la total 8240 drwxr-xr-x? 5 root root??? 4096 2013-03-17 23:27 . drwxr-xr-x 22 root root??? 4096 2013-03-17 23:02 .. drwxr-xr-x? 2 root root??? 4096 2013-03-17 23:08 .deps -rw-r--r--? 1 root root??? 1557 2013-03-15 19:36 fil2 drwxr-xr-x? 2 root root??? 4096 2013-03-17 23:08 .libs -rw-r--r--? 1 root root?? 19385 2013-03-17 23:02 Makefile -rw-r--r--? 1 root root??? 1364 2013-02-26 11:19 Makefile.am -rw-r--r--? 1 root root?? 19852 2013-03-17 23:01 Makefile.in -rwxr-xr-x? 1 root root 7699820 2013-03-17 23:08 OpenBTS -rwxr-xr-x? 1 root root?? 17792 2013-03-17 23:08 OpenBTSCLI -rw-r--r--? 1 root root??? 4401 2013-02-26 11:19 OpenBTSCLI.cpp -rw-r--r--? 1 root root?? 11204 2013-03-17 23:08 OpenBTSCLI.o -rw-r--r--? 1 root root?? 18084 2013-02-26 11:19 OpenBTS.cpp -rwxr-xr-x? 1 root root?? 12252 2013-03-17 23:08 OpenBTSDo -rw-r--r--? 1 root root??? 2367 2013-02-26 11:19 OpenBTSDo.cpp -rw-r--r--? 1 root root??? 8172 2013-03-17 23:08 OpenBTSDo.o -rw-r--r--? 1 root root?? 21120 2013-02-26 11:19 OpenBTS.example.sql -rw-r--r--? 1 root root? 549792 2013-03-17 23:08 OpenBTS.o -rwxr-xr-x? 1 root root???? 139 2013-02-26 11:19 runloop.OpenBTS.sh drwxr-xr-x? 6 root root??? 4096 2013-02-26 11:22 .svn lrwxrwxrwx? 1 root root????? 29 2013-03-17 23:27 transceiver -> ../Transceiver52M/transceiver -rw-r--r--? 1 root root?????? 0 2013-03-01 13:53 trx.c:190 -------------- next part -------------- An HTML attachment was scrubbed... URL: From rafarevertf22 at gmail.com Mon Mar 11 07:49:21 2013 From: rafarevertf22 at gmail.com (R. Revert) Date: Mon, 11 Mar 2013 00:49:21 -0700 Subject: osmocom problems Message-ID: Hi every one im having some problems installing osmocom from the wiki tutorial and this is the first time that im installing osmocom.. i buy the motorola C118 from the sysmocom Shop.. i dont know where i have the mistake installing the software , and maybe some of u can help me.... thanks im using: * *root at ubuntu:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric So i follow the next Steps>* * *root at ubuntu:/opt: aptitude install libtool shtool autoconf git-core pkg-config make gcc* *root at ubuntu:/opt:git clone git://git.osmocom.org/osmocom-bb.git root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore# autoreconf -i root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore#./configure root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore# make root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore#sudo make install* *after this i download *gnu-arm-build.2.shin /opt i give the property permission for the .sh file and root at ubuntu:/opt: sudo apt-get install build-essential libgmp3-dev libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 \ libncurses5-dbg libncurses5-dev libncursesw5 libncursesw5-dbg libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev *root at ubuntu:/opt: mkdir build install src* *root at ubuntu:/opt:cd src/ root at ubuntu:/opt:wget http://ftp.gnu.org/gnu/gcc/gcc-4.5.2/gcc-4.5.2.tar.bz2 root at ubuntu:/opt:wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2 root at ubuntu:/opt:wget ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz* *root at ubuntu:/opt:./gnu-arm-build.2.sh * I will build an arm-elf cross-compiler: Prefix: opt/install Sources: opt/src Build files: opt/build Press ^C now if you do NOT want to do this. after that i get a ok install, i add in the last line of the .bashrc file i add *export PATH=$PATH:/opt/install/bin* and in the root at ubuntu:/opt/osmocom-bb/src# i run: * root at ubuntu:/opt/osmocom-bb/src# make *cd shared/libosmocore/build-target && ../configure \ --host=arm-elf --enable-embedded --disable-shared \ --disable-tests ac_cv_header_sys_select_h=no \ --disable-tests ac_cv_header_sys_socket_h=no \ CFLAGS="-Os -ffunction-sections -I/opt/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs" configure: WARNING: unrecognized options: --disable-tests, --disable-tests configure: WARNING: if you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-elf-strip... arm-elf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make sets $(MAKE)... (cached) yes checking for arm-elf-gcc... arm-elf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-elf-gcc accepts -g... yes checking for arm-elf-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-elf-gcc... gcc3 checking build system type... i686-pc-linux-gnu checking host system type... arm-unknown-elf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by arm-elf-gcc... /opt/install/arm-elf/bin/ld checking if the linker (/opt/install/arm-elf/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /opt/install/bin/arm-elf-nm -B checking the name lister (/opt/install/bin/arm-elf-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert i686-pc-linux-gnu file names to arm-unknown-elf format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /opt/install/arm-elf/bin/ld option to reload object files... -r checking for arm-elf-objdump... arm-elf-objdump checking how to recognize dependent libraries... unknown checking for arm-elf-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-elf-ar... arm-elf-ar checking for archiver @FILE support... @ checking for arm-elf-strip... (cached) arm-elf-strip checking for arm-elf-ranlib... arm-elf-ranlib checking command to parse /opt/install/bin/arm-elf-nm -B output from arm-elf-gcc object... ok checking for sysroot... no checking for arm-elf-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-elf-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... no checking for objdir... .libs checking if arm-elf-gcc supports -fno-rtti -fno-exceptions... no checking for arm-elf-gcc option to produce PIC... -fPIC -DPIC checking if arm-elf-gcc PIC flag -fPIC -DPIC works... yes checking if arm-elf-gcc static flag -static works... yes checking if arm-elf-gcc supports -c -o file.o... yes checking if arm-elf-gcc supports -c -o file.o... (cached) yes checking whether the arm-elf-gcc linker (/opt/install/arm-elf/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... no checking execinfo.h presence... no checking for execinfo.h... no checking for sys/select.h... (cached) no checking for sys/socket.h... (cached) no checking syslog.h usability... no checking syslog.h presence... no checking for syslog.h... no checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for library containing dlopen... no checking for doxygen... false checking if arm-elf-gcc supports -fvisibility=hidden... yes checking whether struct tm has tm_gmtoff member... no configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating libosmogb.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/gsm/Makefile config.status: creating src/gb/Makefile config.status: creating tests/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-tests, --disable-tests cd shared/libosmocore/build-target && make make[1]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make all-recursive make[2]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' Making all in include make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' Making all in src make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' make all-am make[4]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' CC timer.lo CC select.lo CC signal.lo CC msgb.lo CC bits.lo CC bitvec.lo CC statistics.lo ../../src/statistics.c: In function 'osmo_counter_get_by_name': ../../src/statistics.c:72:3: warning: implicit declaration of function 'strcmp' CC write_queue.lo CC utils.lo ../../src/utils.c: In function 'get_value_string': ../../src/utils.c:33:2: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'uint32_t' ../../src/utils.c: In function 'get_string_value': ../../src/utils.c:49:3: warning: implicit declaration of function 'strcasecmp' CC socket.lo CC logging.lo ../../src/logging.c: In function 'log_parse_category_mask': ../../src/logging.c:168:2: warning: implicit declaration of function 'strdup' ../../src/logging.c:168:15: warning: incompatible implicit declaration of built-in function 'strdup' ../../src/logging.c:175:2: warning: implicit declaration of function 'strtok' ../../src/logging.c:175:17: warning: assignment makes pointer from integer without a cast ../../src/logging.c:179:4: warning: implicit declaration of function 'strstr' ../../src/logging.c:179:18: warning: incompatible implicit declaration of built-in function 'strstr' ../../src/logging.c:205:27: warning: assignment makes pointer from integer without a cast ../../src/logging.c: In function '_file_output': ../../src/logging.c:446:2: warning: implicit declaration of function 'fprintf' ../../src/logging.c:446:2: warning: incompatible implicit declaration of built-in function 'fprintf' ../../src/logging.c:447:2: warning: implicit declaration of function 'fflush' ../../src/logging.c: In function 'log_target_create_file': ../../src/logging.c:520:2: warning: implicit declaration of function 'fopen' ../../src/logging.c:520:23: warning: assignment makes pointer from integer without a cast ../../src/logging.c: In function 'log_target_find': ../../src/logging.c:544:4: warning: implicit declaration of function 'strcmp' ../../src/logging.c: In function 'log_target_destroy': ../../src/logging.c:566:4: warning: implicit declaration of function 'fclose' ../../src/logging.c: In function 'log_target_file_reopen': ../../src/logging.c:579:23: warning: assignment makes pointer from integer without a cast CC logging_syslog.lo CC rate_ctr.lo ../../src/rate_ctr.c: In function 'rate_ctr_get_group_by_name_idx': ../../src/rate_ctr.c:153:3: warning: implicit declaration of function 'strcmp' CC gsmtap_util.lo CC crc16.lo CC panic.lo CC backtrace.lo CC conv.lo CC application.lo CC rbtree.lo CC crc8gen.lo CC crc16gen.lo CC crc32gen.lo CC crc64gen.lo CCLD libosmocore.la make[4]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' Making all in src/vty make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' Making all in src/codec make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' CC gsm610.lo CC gsm620.lo CC gsm660.lo CC gsm690.lo CCLD libosmocodec.la make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' Making all in src/gsm make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' CC a5.lo CC rxlev_stat.lo CC tlv_parser.lo CC comp128.lo CC gsm_utils.lo CC rsl.lo CC gsm48.lo ../../../src/gsm/gsm48.c: In function 'gsm48_mi_to_string': ../../../src/gsm/gsm48.c:369:4: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'uint32_t' CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo CC gprs_cipher_core.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo ../../../src/gsm/gsm0411_utils.c: In function 'gsm340_gen_scts': ../../../src/gsm/gsm0411_utils.c:87:2: warning: #warning find a portable way to obtain timezone offset CC gsm0411_smc.lo CC gsm0411_smr.lo CC lapd_core.lo ../../../src/gsm/lapd_core.c: In function 'lapd_rx_u': ../../../src/gsm/lapd_core.c:834:5: warning: implicit declaration of function 'memcmp' CC lapdm.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_milenage.lo CC aes-encblock.lo CC aes-internal.lo CC aes-internal-enc.lo CC milenage.lo ../../../src/gsm/milenage/milenage.c: In function 'milenage_auts': ../../../src/gsm/milenage/milenage.c:226:6: warning: implicit declaration of function 'memcmp' CC gan.lo CCLD libosmogsm.la make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' Making all in src/gb make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' Making all in tests make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' Making all in utils make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make[2]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make[1]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make -C host/layer23 make[1]: Entering directory `/opt/osmocom-bb/src/host/layer23' Making all in include make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' Making all in osmocom make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' Making all in bb make[4]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' Making all in common make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' make[5]: Nothing to be done for `all'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' Making all in misc make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' make[5]: Nothing to be done for `all'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' Making all in mobile make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' make[5]: Nothing to be done for `all'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' make[5]: Nothing to be done for `all-am'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' make[4]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' make[4]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' Making all in src make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/src' Making all in common make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/common' CC l1ctl.o CC l1l2_interface.o CC sap_interface.o CC logging.o CC networks.o CC sim.o sim.c: In function ?gsm_sim_reply?: sim.c:146:11: warning: variable ?payload? set but not used [-Wunused-but-set-variable] CC sysinfo.o CC gps.o CC l1ctl_lapdm_glue.o AR liblayer23.a make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/common' Making all in misc make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/misc' CC main.o CC app_bcch_scan.o app_bcch_scan.c: In function ?signal_cb?: app_bcch_scan.c:48:3: warning: implicit declaration of function ?fps_start? [-Wimplicit-function-declaration] app_bcch_scan.c: In function ?l23_app_init?: app_bcch_scan.c:56:2: warning: implicit declaration of function ?fps_init? [-Wimplicit-function-declaration] CC bcch_scan.o bcch_scan.c: In function ?cinfo_timer_cb?: bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_NONE? not handled in switch [-Wswitch] bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_DONE? not handled in switch [-Wswitch] bcch_scan.c: In function ?rx_sch_info?: bcch_scan.c:236:1: warning: no return statement in function returning non-void [-Wreturn-type] bcch_scan.c: In function ?bscan_sig_cb?: bcch_scan.c:263:3: warning: enumeration value ?FPS_S_NONE? not handled in switch [-Wswitch] bcch_scan.c:263:3: warning: enumeration value ?FPS_S_BINFO? not handled in switch [-Wswitch] bcch_scan.c:241:20: warning: unused variable ?ci? [-Wunused-variable] bcch_scan.c: At top level: bcch_scan.c:206:12: warning: ?rx_bcch_info? defined but not used [-Wunused-function] bcch_scan.c:233:12: warning: ?rx_sch_info? defined but not used [-Wunused-function] CCLD bcch_scan CC app_ccch_scan.o app_ccch_scan.c: In function ?gsm48_rx_imm_ass?: app_ccch_scan.c:203:12: warning: variable ?ma? set but not used [-Wunused-but-set-variable] CC rslms.o CCLD ccch_scan CC app_echo_test.o CCLD echo_test CC app_cell_log.o CC cell_log.o CC geo.o CCLD cell_log CC app_cbch_sniff.o CCLD cbch_sniff make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/misc' Making all in mobile make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/mobile' CC gsm322.o gsm322.c: In function ?gsm322_search_end?: gsm322.c:2055:30: warning: variable ?mnc? set but not used [-Wunused-but-set-variable] gsm322.c: In function ?gsm322_exit?: gsm322.c:5142:7: warning: variable ?rc? set but not used [-Wunused-but-set-variable] CC gsm480_ss.o gsm480_ss.c: In function ?gsm480_mmss_ind?: gsm480_ss.c:1221:6: warning: variable ?rc? set but not used [-Wunused-but-set-variable] CC gsm411_sms.o gsm411_sms.c: In function ?gsm340_rx_tpdu?: gsm411_sms.c:228:19: warning: variable ?sms_mms? set but not used [-Wunused-but-set-variable] gsm411_sms.c: In function ?gsm411_rx_rp_ud?: gsm411_sms.c:375:2: warning: format ?%li? expects argument of type ?long int?, but argument 7 has type ?int? [-Wformat] gsm411_sms.c: In function ?gsm411_tx_sms_submit?: gsm411_sms.c:657:3: warning: passing argument 4 of ?gsm411_smc_init? from incompatible pointer type [enabled by default] /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? gsm411_sms.c:657:3: error: too many arguments to function ?gsm411_smc_init? /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here gsm411_sms.c:659:3: error: too many arguments to function ?gsm411_smr_init? /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here gsm411_sms.c: In function ?gsm411_rcv_sms?: gsm411_sms.c:911:4: warning: passing argument 4 of ?gsm411_smc_init? from incompatible pointer type [enabled by default] /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? gsm411_sms.c:911:4: error: too many arguments to function ?gsm411_smc_init? /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here gsm411_sms.c:913:4: error: too many arguments to function ?gsm411_smr_init? /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here make[3]: *** [gsm411_sms.o] Error 1 make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/mobile' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/opt/osmocom-bb/src/host/layer23' make: *** [host/layer23/layer23] Error 2* //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// or when i clean the installation again i run also the other command root at ubuntu:/opt/osmocom-bb/src# make -e CROSS_TOOL_PREFIX=/opt/install/bin/arm-elf-gcc- *cd shared/libosmocore/build-target && ../configure \ --host=arm-elf --enable-embedded --disable-shared \ --disable-tests ac_cv_header_sys_select_h=no \ --disable-tests ac_cv_header_sys_socket_h=no \ CFLAGS="-Os -ffunction-sections -I/opt/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs" configure: WARNING: unrecognized options: --disable-tests, --disable-tests configure: WARNING: if you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-elf-strip... arm-elf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make sets $(MAKE)... (cached) yes checking for arm-elf-gcc... arm-elf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-elf-gcc accepts -g... yes checking for arm-elf-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-elf-gcc... gcc3 checking build system type... i686-pc-linux-gnu checking host system type... arm-unknown-elf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by arm-elf-gcc... /opt/install/arm-elf/bin/ld checking if the linker (/opt/install/arm-elf/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /opt/install/bin/arm-elf-nm -B checking the name lister (/opt/install/bin/arm-elf-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert i686-pc-linux-gnu file names to arm-unknown-elf format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /opt/install/arm-elf/bin/ld option to reload object files... -r checking for arm-elf-objdump... arm-elf-objdump checking how to recognize dependent libraries... unknown checking for arm-elf-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-elf-ar... arm-elf-ar checking for archiver @FILE support... @ checking for arm-elf-strip... (cached) arm-elf-strip checking for arm-elf-ranlib... arm-elf-ranlib checking command to parse /opt/install/bin/arm-elf-nm -B output from arm-elf-gcc object... ok checking for sysroot... no checking for arm-elf-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-elf-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... no checking for objdir... .libs checking if arm-elf-gcc supports -fno-rtti -fno-exceptions... no checking for arm-elf-gcc option to produce PIC... -fPIC -DPIC checking if arm-elf-gcc PIC flag -fPIC -DPIC works... yes checking if arm-elf-gcc static flag -static works... yes checking if arm-elf-gcc supports -c -o file.o... yes checking if arm-elf-gcc supports -c -o file.o... (cached) yes checking whether the arm-elf-gcc linker (/opt/install/arm-elf/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... no checking execinfo.h presence... no checking for execinfo.h... no checking for sys/select.h... (cached) no checking for sys/socket.h... (cached) no checking syslog.h usability... no checking syslog.h presence... no checking for syslog.h... no checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for library containing dlopen... no checking for doxygen... false checking if arm-elf-gcc supports -fvisibility=hidden... yes checking whether struct tm has tm_gmtoff member... no configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating libosmogb.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/gsm/Makefile config.status: creating src/gb/Makefile config.status: creating tests/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-tests, --disable-tests cd shared/libosmocore/build-target && make make[1]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make all-recursive make[2]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' Making all in include make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' Making all in src make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' make all-am make[4]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' CC timer.lo CC select.lo CC signal.lo CC msgb.lo CC bits.lo CC bitvec.lo CC statistics.lo ../../src/statistics.c: In function 'osmo_counter_get_by_name': ../../src/statistics.c:72:3: warning: implicit declaration of function 'strcmp' CC write_queue.lo CC utils.lo ../../src/utils.c: In function 'get_value_string': ../../src/utils.c:33:2: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'uint32_t' ../../src/utils.c: In function 'get_string_value': ../../src/utils.c:49:3: warning: implicit declaration of function 'strcasecmp' CC socket.lo CC logging.lo ../../src/logging.c: In function 'log_parse_category_mask': ../../src/logging.c:168:2: warning: implicit declaration of function 'strdup' ../../src/logging.c:168:15: warning: incompatible implicit declaration of built-in function 'strdup' ../../src/logging.c:175:2: warning: implicit declaration of function 'strtok' ../../src/logging.c:175:17: warning: assignment makes pointer from integer without a cast ../../src/logging.c:179:4: warning: implicit declaration of function 'strstr' ../../src/logging.c:179:18: warning: incompatible implicit declaration of built-in function 'strstr' ../../src/logging.c:205:27: warning: assignment makes pointer from integer without a cast ../../src/logging.c: In function '_file_output': ../../src/logging.c:446:2: warning: implicit declaration of function 'fprintf' ../../src/logging.c:446:2: warning: incompatible implicit declaration of built-in function 'fprintf' ../../src/logging.c:447:2: warning: implicit declaration of function 'fflush' ../../src/logging.c: In function 'log_target_create_file': ../../src/logging.c:520:2: warning: implicit declaration of function 'fopen' ../../src/logging.c:520:23: warning: assignment makes pointer from integer without a cast ../../src/logging.c: In function 'log_target_find': ../../src/logging.c:544:4: warning: implicit declaration of function 'strcmp' ../../src/logging.c: In function 'log_target_destroy': ../../src/logging.c:566:4: warning: implicit declaration of function 'fclose' ../../src/logging.c: In function 'log_target_file_reopen': ../../src/logging.c:579:23: warning: assignment makes pointer from integer without a cast CC logging_syslog.lo CC rate_ctr.lo ../../src/rate_ctr.c: In function 'rate_ctr_get_group_by_name_idx': ../../src/rate_ctr.c:153:3: warning: implicit declaration of function 'strcmp' CC gsmtap_util.lo CC crc16.lo CC panic.lo CC backtrace.lo CC conv.lo CC application.lo CC rbtree.lo CC crc8gen.lo CC crc16gen.lo CC crc32gen.lo CC crc64gen.lo CCLD libosmocore.la make[4]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' Making all in src/vty make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' Making all in src/codec make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' CC gsm610.lo CC gsm620.lo CC gsm660.lo CC gsm690.lo CCLD libosmocodec.la make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' Making all in src/gsm make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' CC a5.lo CC rxlev_stat.lo CC tlv_parser.lo CC comp128.lo CC gsm_utils.lo CC rsl.lo CC gsm48.lo ../../../src/gsm/gsm48.c: In function 'gsm48_mi_to_string': ../../../src/gsm/gsm48.c:369:4: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'uint32_t' CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo CC gprs_cipher_core.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo ../../../src/gsm/gsm0411_utils.c: In function 'gsm340_gen_scts': ../../../src/gsm/gsm0411_utils.c:87:2: warning: #warning find a portable way to obtain timezone offset CC gsm0411_smc.lo CC gsm0411_smr.lo CC lapd_core.lo ../../../src/gsm/lapd_core.c: In function 'lapd_rx_u': ../../../src/gsm/lapd_core.c:834:5: warning: implicit declaration of function 'memcmp' CC lapdm.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_milenage.lo CC aes-encblock.lo CC aes-internal.lo CC aes-internal-enc.lo CC milenage.lo ../../../src/gsm/milenage/milenage.c: In function 'milenage_auts': ../../../src/gsm/milenage/milenage.c:226:6: warning: implicit declaration of function 'memcmp' CC gan.lo CCLD libosmogsm.la make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' Making all in src/gb make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' Making all in tests make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' Making all in utils make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' make[3]: Entering directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make[3]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make[2]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make[1]: Leaving directory `/opt/osmocom-bb/src/shared/libosmocore/build-target' make -C host/layer23 make[1]: Entering directory `/opt/osmocom-bb/src/host/layer23' Making all in include make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' Making all in osmocom make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' Making all in bb make[4]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' Making all in common make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' make[5]: Nothing to be done for `all'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' Making all in misc make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' make[5]: Nothing to be done for `all'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' Making all in mobile make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' make[5]: Nothing to be done for `all'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' make[5]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' make[5]: Nothing to be done for `all-am'. make[5]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' make[4]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' make[4]: Entering directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include/osmocom' make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' Making all in src make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/src' Making all in common make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/common' CC l1ctl.o CC l1l2_interface.o CC sap_interface.o CC logging.o CC networks.o CC sim.o sim.c: In function ?gsm_sim_reply?: sim.c:146:11: warning: variable ?payload? set but not used [-Wunused-but-set-variable] CC sysinfo.o CC gps.o CC l1ctl_lapdm_glue.o AR liblayer23.a make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/common' Making all in misc make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/misc' CC main.o CC app_bcch_scan.o app_bcch_scan.c: In function ?signal_cb?: app_bcch_scan.c:48:3: warning: implicit declaration of function ?fps_start? [-Wimplicit-function-declaration] app_bcch_scan.c: In function ?l23_app_init?: app_bcch_scan.c:56:2: warning: implicit declaration of function ?fps_init? [-Wimplicit-function-declaration] CC bcch_scan.o bcch_scan.c: In function ?cinfo_timer_cb?: bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_NONE? not handled in switch [-Wswitch] bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_DONE? not handled in switch [-Wswitch] bcch_scan.c: In function ?rx_sch_info?: bcch_scan.c:236:1: warning: no return statement in function returning non-void [-Wreturn-type] bcch_scan.c: In function ?bscan_sig_cb?: bcch_scan.c:263:3: warning: enumeration value ?FPS_S_NONE? not handled in switch [-Wswitch] bcch_scan.c:263:3: warning: enumeration value ?FPS_S_BINFO? not handled in switch [-Wswitch] bcch_scan.c:241:20: warning: unused variable ?ci? [-Wunused-variable] bcch_scan.c: At top level: bcch_scan.c:206:12: warning: ?rx_bcch_info? defined but not used [-Wunused-function] bcch_scan.c:233:12: warning: ?rx_sch_info? defined but not used [-Wunused-function] CCLD bcch_scan CC app_ccch_scan.o app_ccch_scan.c: In function ?gsm48_rx_imm_ass?: app_ccch_scan.c:203:12: warning: variable ?ma? set but not used [-Wunused-but-set-variable] CC rslms.o CCLD ccch_scan CC app_echo_test.o CCLD echo_test CC app_cell_log.o CC cell_log.o CC geo.o CCLD cell_log CC app_cbch_sniff.o CCLD cbch_sniff make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/misc' Making all in mobile make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/mobile' CC gsm322.o gsm322.c: In function ?gsm322_search_end?: gsm322.c:2055:30: warning: variable ?mnc? set but not used [-Wunused-but-set-variable] gsm322.c: In function ?gsm322_exit?: gsm322.c:5142:7: warning: variable ?rc? set but not used [-Wunused-but-set-variable] CC gsm480_ss.o gsm480_ss.c: In function ?gsm480_mmss_ind?: gsm480_ss.c:1221:6: warning: variable ?rc? set but not used [-Wunused-but-set-variable] CC gsm411_sms.o gsm411_sms.c: In function ?gsm340_rx_tpdu?: gsm411_sms.c:228:19: warning: variable ?sms_mms? set but not used [-Wunused-but-set-variable] gsm411_sms.c: In function ?gsm411_rx_rp_ud?: gsm411_sms.c:375:2: warning: format ?%li? expects argument of type ?long int?, but argument 7 has type ?int? [-Wformat] gsm411_sms.c: In function ?gsm411_tx_sms_submit?: gsm411_sms.c:657:3: warning: passing argument 4 of ?gsm411_smc_init? from incompatible pointer type [enabled by default] /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? gsm411_sms.c:657:3: error: too many arguments to function ?gsm411_smc_init? /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here gsm411_sms.c:659:3: error: too many arguments to function ?gsm411_smr_init? /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here gsm411_sms.c: In function ?gsm411_rcv_sms?: gsm411_sms.c:911:4: warning: passing argument 4 of ?gsm411_smc_init? from incompatible pointer type [enabled by default] /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? gsm411_sms.c:911:4: error: too many arguments to function ?gsm411_smc_init? /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here gsm411_sms.c:913:4: error: too many arguments to function ?gsm411_smr_init? /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here make[3]: *** [gsm411_sms.o] Error 1 make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/mobile' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/opt/osmocom-bb/src/host/layer23' make: *** [host/layer23/layer23] Error 2* * * * * * -------------- next part -------------- An HTML attachment was scrubbed... URL: From tmjerry04 at gmail.com Wed Mar 27 08:53:43 2013 From: tmjerry04 at gmail.com (tom jerry) Date: Wed, 27 Mar 2013 11:53:43 +0300 Subject: osmocom problems In-Reply-To: References: Message-ID: i have the same problem. Did you manage to get a solution? On 3/11/13, R. Revert wrote: > Hi every one > > im having some problems installing osmocom from the wiki tutorial and this > is the first time that im installing osmocom.. > i buy the motorola C118 from the sysmocom Shop.. i dont know where i have > the mistake installing the software , and maybe some of u can help me.... > thanks > > im using: > > * > *root at ubuntu:~# lsb_release -a > No LSB modules are available. > Distributor ID: Ubuntu > Description: Ubuntu 11.10 > Release: 11.10 > Codename: oneiric > > So i follow the next Steps>* > * > > *root at ubuntu:/opt: aptitude install libtool shtool autoconf git-core > pkg-config make gcc* > > *root at ubuntu:/opt:git clone git://git.osmocom.org/osmocom-bb.git > > root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore# autoreconf -i > root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore#./configure > root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore# make > root at ubuntu:/opt/osmocom-bb/src/shared/libosmocore#sudo make install* > > *after this i download > *gnu-arm-build.2.shin > /opt i give the property permission for the .sh file and > > root at ubuntu:/opt: sudo apt-get install build-essential libgmp3-dev > libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 \ > libncurses5-dbg libncurses5-dev libncursesw5 libncursesw5-dbg > libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev > > *root at ubuntu:/opt: mkdir build install src* > > *root at ubuntu:/opt:cd src/ > root at ubuntu:/opt:wget > http://ftp.gnu.org/gnu/gcc/gcc-4.5.2/gcc-4.5.2.tar.bz2 > root at ubuntu:/opt:wget > http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2 > root at ubuntu:/opt:wget > ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz* > > *root at ubuntu:/opt:./gnu-arm-build.2.sh * > I will build an arm-elf cross-compiler: > > Prefix: opt/install > Sources: opt/src > Build files: opt/build > > Press ^C now if you do NOT want to do this. > > after that i get a ok install, i add in the last line of the .bashrc file i > add > *export PATH=$PATH:/opt/install/bin* > > and in the root at ubuntu:/opt/osmocom-bb/src# > i run: > > * > root at ubuntu:/opt/osmocom-bb/src# make > *cd shared/libosmocore/build-target && ../configure \ > --host=arm-elf --enable-embedded --disable-shared \ > --disable-tests ac_cv_header_sys_select_h=no \ > --disable-tests ac_cv_header_sys_socket_h=no \ > CFLAGS="-Os -ffunction-sections > -I/opt/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs" > configure: WARNING: unrecognized options: --disable-tests, --disable-tests > configure: WARNING: if you wanted to set the --build type, don't use > --host. > If a cross compiler is detected then cross compile mode will be used > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for arm-elf-strip... arm-elf-strip > checking for a thread-safe mkdir -p... /bin/mkdir -p > checking for gawk... no > checking for mawk... mawk > checking whether make sets $(MAKE)... yes > checking whether make sets $(MAKE)... (cached) yes > checking for arm-elf-gcc... arm-elf-gcc > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... yes > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether arm-elf-gcc accepts -g... yes > checking for arm-elf-gcc option to accept ISO C89... none needed > checking for style of include used by make... GNU > checking dependency style of arm-elf-gcc... gcc3 > checking build system type... i686-pc-linux-gnu > checking host system type... arm-unknown-elf > checking how to print strings... printf > checking for a sed that does not truncate output... /bin/sed > checking for grep that handles long lines and -e... /bin/grep > checking for egrep... /bin/grep -E > checking for fgrep... /bin/grep -F > checking for ld used by arm-elf-gcc... /opt/install/arm-elf/bin/ld > checking if the linker (/opt/install/arm-elf/bin/ld) is GNU ld... yes > checking for BSD- or MS-compatible name lister (nm)... > /opt/install/bin/arm-elf-nm -B > checking the name lister (/opt/install/bin/arm-elf-nm -B) interface... BSD > nm > checking whether ln -s works... yes > checking the maximum length of command line arguments... 805306365 > checking whether the shell understands some XSI constructs... yes > checking whether the shell understands "+="... yes > checking how to convert i686-pc-linux-gnu file names to arm-unknown-elf > format... func_convert_file_noop > checking how to convert i686-pc-linux-gnu file names to toolchain format... > func_convert_file_noop > checking for /opt/install/arm-elf/bin/ld option to reload object files... > -r > checking for arm-elf-objdump... arm-elf-objdump > checking how to recognize dependent libraries... unknown > checking for arm-elf-dlltool... no > checking for dlltool... no > checking how to associate runtime and link libraries... printf %s\n > checking for arm-elf-ar... arm-elf-ar > checking for archiver @FILE support... @ > checking for arm-elf-strip... (cached) arm-elf-strip > checking for arm-elf-ranlib... arm-elf-ranlib > checking command to parse /opt/install/bin/arm-elf-nm -B output from > arm-elf-gcc object... ok > checking for sysroot... no > checking for arm-elf-mt... no > checking for mt... mt > configure: WARNING: using cross tools not prefixed with host triplet > checking if mt is a manifest tool... no > checking how to run the C preprocessor... arm-elf-gcc -E > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking for dlfcn.h... no > checking for objdir... .libs > checking if arm-elf-gcc supports -fno-rtti -fno-exceptions... no > checking for arm-elf-gcc option to produce PIC... -fPIC -DPIC > checking if arm-elf-gcc PIC flag -fPIC -DPIC works... yes > checking if arm-elf-gcc static flag -static works... yes > checking if arm-elf-gcc supports -c -o file.o... yes > checking if arm-elf-gcc supports -c -o file.o... (cached) yes > checking whether the arm-elf-gcc linker (/opt/install/arm-elf/bin/ld) > supports shared libraries... yes > checking dynamic linker characteristics... no > checking how to hardcode library paths into programs... immediate > checking whether stripping libraries is possible... yes > checking if libtool supports shared libraries... no > checking whether to build shared libraries... no > checking whether to build static libraries... yes > checking for ANSI C header files... (cached) yes > checking execinfo.h usability... no > checking execinfo.h presence... no > checking for execinfo.h... no > checking for sys/select.h... (cached) no > checking for sys/socket.h... (cached) no > checking syslog.h usability... no > checking syslog.h presence... no > checking for syslog.h... no > checking ctype.h usability... yes > checking ctype.h presence... yes > checking for ctype.h... yes > checking for size_t... yes > checking for working alloca.h... yes > checking for alloca... yes > checking for library containing dlopen... no > checking for doxygen... false > checking if arm-elf-gcc supports -fvisibility=hidden... yes > checking whether struct tm has tm_gmtoff member... no > configure: creating ./config.status > config.status: creating libosmocore.pc > config.status: creating libosmocodec.pc > config.status: creating libosmovty.pc > config.status: creating libosmogsm.pc > config.status: creating libosmogb.pc > config.status: creating include/Makefile > config.status: creating src/Makefile > config.status: creating src/vty/Makefile > config.status: creating src/codec/Makefile > config.status: creating src/gsm/Makefile > config.status: creating src/gb/Makefile > config.status: creating tests/Makefile > config.status: creating utils/Makefile > config.status: creating Doxyfile.core > config.status: creating Doxyfile.gsm > config.status: creating Doxyfile.vty > config.status: creating Doxyfile.codec > config.status: creating Makefile > config.status: creating config.h > config.status: config.h is unchanged > config.status: executing tests/atconfig commands > config.status: executing depfiles commands > config.status: executing libtool commands > configure: WARNING: unrecognized options: --disable-tests, --disable-tests > cd shared/libosmocore/build-target && make > make[1]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make all-recursive > make[2]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > Making all in include > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' > Making all in src > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > make all-am > make[4]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > CC timer.lo > CC select.lo > CC signal.lo > CC msgb.lo > CC bits.lo > CC bitvec.lo > CC statistics.lo > ../../src/statistics.c: In function 'osmo_counter_get_by_name': > ../../src/statistics.c:72:3: warning: implicit declaration of function > 'strcmp' > CC write_queue.lo > CC utils.lo > ../../src/utils.c: In function 'get_value_string': > ../../src/utils.c:33:2: warning: format '%x' expects type 'unsigned int', > but argument 4 has type 'uint32_t' > ../../src/utils.c: In function 'get_string_value': > ../../src/utils.c:49:3: warning: implicit declaration of function > 'strcasecmp' > CC socket.lo > CC logging.lo > ../../src/logging.c: In function 'log_parse_category_mask': > ../../src/logging.c:168:2: warning: implicit declaration of function > 'strdup' > ../../src/logging.c:168:15: warning: incompatible implicit declaration of > built-in function 'strdup' > ../../src/logging.c:175:2: warning: implicit declaration of function > 'strtok' > ../../src/logging.c:175:17: warning: assignment makes pointer from integer > without a cast > ../../src/logging.c:179:4: warning: implicit declaration of function > 'strstr' > ../../src/logging.c:179:18: warning: incompatible implicit declaration of > built-in function 'strstr' > ../../src/logging.c:205:27: warning: assignment makes pointer from integer > without a cast > ../../src/logging.c: In function '_file_output': > ../../src/logging.c:446:2: warning: implicit declaration of function > 'fprintf' > ../../src/logging.c:446:2: warning: incompatible implicit declaration of > built-in function 'fprintf' > ../../src/logging.c:447:2: warning: implicit declaration of function > 'fflush' > ../../src/logging.c: In function 'log_target_create_file': > ../../src/logging.c:520:2: warning: implicit declaration of function > 'fopen' > ../../src/logging.c:520:23: warning: assignment makes pointer from integer > without a cast > ../../src/logging.c: In function 'log_target_find': > ../../src/logging.c:544:4: warning: implicit declaration of function > 'strcmp' > ../../src/logging.c: In function 'log_target_destroy': > ../../src/logging.c:566:4: warning: implicit declaration of function > 'fclose' > ../../src/logging.c: In function 'log_target_file_reopen': > ../../src/logging.c:579:23: warning: assignment makes pointer from integer > without a cast > CC logging_syslog.lo > CC rate_ctr.lo > ../../src/rate_ctr.c: In function 'rate_ctr_get_group_by_name_idx': > ../../src/rate_ctr.c:153:3: warning: implicit declaration of function > 'strcmp' > CC gsmtap_util.lo > CC crc16.lo > CC panic.lo > CC backtrace.lo > CC conv.lo > CC application.lo > CC rbtree.lo > CC crc8gen.lo > CC crc16gen.lo > CC crc32gen.lo > CC crc64gen.lo > CCLD libosmocore.la > make[4]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > Making all in src/vty > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' > Making all in src/codec > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' > CC gsm610.lo > CC gsm620.lo > CC gsm660.lo > CC gsm690.lo > CCLD libosmocodec.la > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' > Making all in src/gsm > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' > CC a5.lo > CC rxlev_stat.lo > CC tlv_parser.lo > CC comp128.lo > CC gsm_utils.lo > CC rsl.lo > CC gsm48.lo > ../../../src/gsm/gsm48.c: In function 'gsm48_mi_to_string': > ../../../src/gsm/gsm48.c:369:4: warning: format '%u' expects type 'unsigned > int', but argument 4 has type 'uint32_t' > CC gsm48_ie.lo > CC gsm0808.lo > CC sysinfo.lo > CC gprs_cipher_core.lo > CC gsm0480.lo > CC abis_nm.lo > CC gsm0502.lo > CC gsm0411_utils.lo > ../../../src/gsm/gsm0411_utils.c: In function 'gsm340_gen_scts': > ../../../src/gsm/gsm0411_utils.c:87:2: warning: #warning find a portable > way to obtain timezone offset > CC gsm0411_smc.lo > CC gsm0411_smr.lo > CC lapd_core.lo > ../../../src/gsm/lapd_core.c: In function 'lapd_rx_u': > ../../../src/gsm/lapd_core.c:834:5: warning: implicit declaration of > function 'memcmp' > CC lapdm.lo > CC auth_core.lo > CC auth_comp128v1.lo > CC auth_milenage.lo > CC aes-encblock.lo > CC aes-internal.lo > CC aes-internal-enc.lo > CC milenage.lo > ../../../src/gsm/milenage/milenage.c: In function 'milenage_auts': > ../../../src/gsm/milenage/milenage.c:226:6: warning: implicit declaration > of function 'memcmp' > CC gan.lo > CCLD libosmogsm.la > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' > Making all in src/gb > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' > Making all in tests > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' > Making all in utils > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make[2]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make[1]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make -C host/layer23 > make[1]: Entering directory `/opt/osmocom-bb/src/host/layer23' > Making all in include > make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' > Making all in osmocom > make[3]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > Making all in bb > make[4]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > Making all in common > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' > make[5]: Nothing to be done for `all'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' > Making all in misc > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' > make[5]: Nothing to be done for `all'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' > Making all in mobile > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' > make[5]: Nothing to be done for `all'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > make[5]: Nothing to be done for `all-am'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > make[4]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > make[4]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > make[4]: Nothing to be done for `all-am'. > make[4]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > make[3]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' > make[3]: Nothing to be done for `all-am'. > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' > make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' > Making all in src > make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/src' > Making all in common > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/common' > CC l1ctl.o > CC l1l2_interface.o > CC sap_interface.o > CC logging.o > CC networks.o > CC sim.o > sim.c: In function ?gsm_sim_reply?: > sim.c:146:11: warning: variable ?payload? set but not used > [-Wunused-but-set-variable] > CC sysinfo.o > CC gps.o > CC l1ctl_lapdm_glue.o > AR liblayer23.a > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/common' > Making all in misc > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/misc' > CC main.o > CC app_bcch_scan.o > app_bcch_scan.c: In function ?signal_cb?: > app_bcch_scan.c:48:3: warning: implicit declaration of function ?fps_start? > [-Wimplicit-function-declaration] > app_bcch_scan.c: In function ?l23_app_init?: > app_bcch_scan.c:56:2: warning: implicit declaration of function ?fps_init? > [-Wimplicit-function-declaration] > CC bcch_scan.o > bcch_scan.c: In function ?cinfo_timer_cb?: > bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_NONE? not handled in > switch [-Wswitch] > bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_DONE? not handled in > switch [-Wswitch] > bcch_scan.c: In function ?rx_sch_info?: > bcch_scan.c:236:1: warning: no return statement in function returning > non-void [-Wreturn-type] > bcch_scan.c: In function ?bscan_sig_cb?: > bcch_scan.c:263:3: warning: enumeration value ?FPS_S_NONE? not handled in > switch [-Wswitch] > bcch_scan.c:263:3: warning: enumeration value ?FPS_S_BINFO? not handled in > switch [-Wswitch] > bcch_scan.c:241:20: warning: unused variable ?ci? [-Wunused-variable] > bcch_scan.c: At top level: > bcch_scan.c:206:12: warning: ?rx_bcch_info? defined but not used > [-Wunused-function] > bcch_scan.c:233:12: warning: ?rx_sch_info? defined but not used > [-Wunused-function] > CCLD bcch_scan > CC app_ccch_scan.o > app_ccch_scan.c: In function ?gsm48_rx_imm_ass?: > app_ccch_scan.c:203:12: warning: variable ?ma? set but not used > [-Wunused-but-set-variable] > CC rslms.o > CCLD ccch_scan > CC app_echo_test.o > CCLD echo_test > CC app_cell_log.o > CC cell_log.o > CC geo.o > CCLD cell_log > CC app_cbch_sniff.o > CCLD cbch_sniff > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/misc' > Making all in mobile > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/mobile' > CC gsm322.o > gsm322.c: In function ?gsm322_search_end?: > gsm322.c:2055:30: warning: variable ?mnc? set but not used > [-Wunused-but-set-variable] > gsm322.c: In function ?gsm322_exit?: > gsm322.c:5142:7: warning: variable ?rc? set but not used > [-Wunused-but-set-variable] > CC gsm480_ss.o > gsm480_ss.c: In function ?gsm480_mmss_ind?: > gsm480_ss.c:1221:6: warning: variable ?rc? set but not used > [-Wunused-but-set-variable] > CC gsm411_sms.o > gsm411_sms.c: In function ?gsm340_rx_tpdu?: > gsm411_sms.c:228:19: warning: variable ?sms_mms? set but not used > [-Wunused-but-set-variable] > gsm411_sms.c: In function ?gsm411_rx_rp_ud?: > gsm411_sms.c:375:2: warning: format ?%li? expects argument of type ?long > int?, but argument 7 has type ?int? [-Wformat] > gsm411_sms.c: In function ?gsm411_tx_sms_submit?: > gsm411_sms.c:657:3: warning: passing argument 4 of ?gsm411_smc_init? from > incompatible pointer type [enabled by default] > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int > (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of > type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? > gsm411_sms.c:657:3: error: too many arguments to function ?gsm411_smc_init? > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here > gsm411_sms.c:659:3: error: too many arguments to function ?gsm411_smr_init? > /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here > gsm411_sms.c: In function ?gsm411_rcv_sms?: > gsm411_sms.c:911:4: warning: passing argument 4 of ?gsm411_smc_init? from > incompatible pointer type [enabled by default] > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int > (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of > type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? > gsm411_sms.c:911:4: error: too many arguments to function ?gsm411_smc_init? > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here > gsm411_sms.c:913:4: error: too many arguments to function ?gsm411_smr_init? > /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here > make[3]: *** [gsm411_sms.o] Error 1 > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/mobile' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/opt/osmocom-bb/src/host/layer23' > make: *** [host/layer23/layer23] Error 2* > > //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// > > or when i clean the installation again i run also the other command > > > root at ubuntu:/opt/osmocom-bb/src# make -e > CROSS_TOOL_PREFIX=/opt/install/bin/arm-elf-gcc- > *cd shared/libosmocore/build-target && ../configure \ > --host=arm-elf --enable-embedded --disable-shared \ > --disable-tests ac_cv_header_sys_select_h=no \ > --disable-tests ac_cv_header_sys_socket_h=no \ > CFLAGS="-Os -ffunction-sections > -I/opt/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs" > configure: WARNING: unrecognized options: --disable-tests, --disable-tests > configure: WARNING: if you wanted to set the --build type, don't use > --host. > If a cross compiler is detected then cross compile mode will be used > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for arm-elf-strip... arm-elf-strip > checking for a thread-safe mkdir -p... /bin/mkdir -p > checking for gawk... no > checking for mawk... mawk > checking whether make sets $(MAKE)... yes > checking whether make sets $(MAKE)... (cached) yes > checking for arm-elf-gcc... arm-elf-gcc > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... yes > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether arm-elf-gcc accepts -g... yes > checking for arm-elf-gcc option to accept ISO C89... none needed > checking for style of include used by make... GNU > checking dependency style of arm-elf-gcc... gcc3 > checking build system type... i686-pc-linux-gnu > checking host system type... arm-unknown-elf > checking how to print strings... printf > checking for a sed that does not truncate output... /bin/sed > checking for grep that handles long lines and -e... /bin/grep > checking for egrep... /bin/grep -E > checking for fgrep... /bin/grep -F > checking for ld used by arm-elf-gcc... /opt/install/arm-elf/bin/ld > checking if the linker (/opt/install/arm-elf/bin/ld) is GNU ld... yes > checking for BSD- or MS-compatible name lister (nm)... > /opt/install/bin/arm-elf-nm -B > checking the name lister (/opt/install/bin/arm-elf-nm -B) interface... BSD > nm > checking whether ln -s works... yes > checking the maximum length of command line arguments... 805306365 > checking whether the shell understands some XSI constructs... yes > checking whether the shell understands "+="... yes > checking how to convert i686-pc-linux-gnu file names to arm-unknown-elf > format... func_convert_file_noop > checking how to convert i686-pc-linux-gnu file names to toolchain format... > func_convert_file_noop > checking for /opt/install/arm-elf/bin/ld option to reload object files... > -r > checking for arm-elf-objdump... arm-elf-objdump > checking how to recognize dependent libraries... unknown > checking for arm-elf-dlltool... no > checking for dlltool... no > checking how to associate runtime and link libraries... printf %s\n > checking for arm-elf-ar... arm-elf-ar > checking for archiver @FILE support... @ > checking for arm-elf-strip... (cached) arm-elf-strip > checking for arm-elf-ranlib... arm-elf-ranlib > checking command to parse /opt/install/bin/arm-elf-nm -B output from > arm-elf-gcc object... ok > checking for sysroot... no > checking for arm-elf-mt... no > checking for mt... mt > configure: WARNING: using cross tools not prefixed with host triplet > checking if mt is a manifest tool... no > checking how to run the C preprocessor... arm-elf-gcc -E > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking for dlfcn.h... no > checking for objdir... .libs > checking if arm-elf-gcc supports -fno-rtti -fno-exceptions... no > checking for arm-elf-gcc option to produce PIC... -fPIC -DPIC > checking if arm-elf-gcc PIC flag -fPIC -DPIC works... yes > checking if arm-elf-gcc static flag -static works... yes > checking if arm-elf-gcc supports -c -o file.o... yes > checking if arm-elf-gcc supports -c -o file.o... (cached) yes > checking whether the arm-elf-gcc linker (/opt/install/arm-elf/bin/ld) > supports shared libraries... yes > checking dynamic linker characteristics... no > checking how to hardcode library paths into programs... immediate > checking whether stripping libraries is possible... yes > checking if libtool supports shared libraries... no > checking whether to build shared libraries... no > checking whether to build static libraries... yes > checking for ANSI C header files... (cached) yes > checking execinfo.h usability... no > checking execinfo.h presence... no > checking for execinfo.h... no > checking for sys/select.h... (cached) no > checking for sys/socket.h... (cached) no > checking syslog.h usability... no > checking syslog.h presence... no > checking for syslog.h... no > checking ctype.h usability... yes > checking ctype.h presence... yes > checking for ctype.h... yes > checking for size_t... yes > checking for working alloca.h... yes > checking for alloca... yes > checking for library containing dlopen... no > checking for doxygen... false > checking if arm-elf-gcc supports -fvisibility=hidden... yes > checking whether struct tm has tm_gmtoff member... no > configure: creating ./config.status > config.status: creating libosmocore.pc > config.status: creating libosmocodec.pc > config.status: creating libosmovty.pc > config.status: creating libosmogsm.pc > config.status: creating libosmogb.pc > config.status: creating include/Makefile > config.status: creating src/Makefile > config.status: creating src/vty/Makefile > config.status: creating src/codec/Makefile > config.status: creating src/gsm/Makefile > config.status: creating src/gb/Makefile > config.status: creating tests/Makefile > config.status: creating utils/Makefile > config.status: creating Doxyfile.core > config.status: creating Doxyfile.gsm > config.status: creating Doxyfile.vty > config.status: creating Doxyfile.codec > config.status: creating Makefile > config.status: creating config.h > config.status: config.h is unchanged > config.status: executing tests/atconfig commands > config.status: executing depfiles commands > config.status: executing libtool commands > configure: WARNING: unrecognized options: --disable-tests, --disable-tests > cd shared/libosmocore/build-target && make > make[1]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make all-recursive > make[2]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > Making all in include > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/include' > Making all in src > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > make all-am > make[4]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > CC timer.lo > CC select.lo > CC signal.lo > CC msgb.lo > CC bits.lo > CC bitvec.lo > CC statistics.lo > ../../src/statistics.c: In function 'osmo_counter_get_by_name': > ../../src/statistics.c:72:3: warning: implicit declaration of function > 'strcmp' > CC write_queue.lo > CC utils.lo > ../../src/utils.c: In function 'get_value_string': > ../../src/utils.c:33:2: warning: format '%x' expects type 'unsigned int', > but argument 4 has type 'uint32_t' > ../../src/utils.c: In function 'get_string_value': > ../../src/utils.c:49:3: warning: implicit declaration of function > 'strcasecmp' > CC socket.lo > CC logging.lo > ../../src/logging.c: In function 'log_parse_category_mask': > ../../src/logging.c:168:2: warning: implicit declaration of function > 'strdup' > ../../src/logging.c:168:15: warning: incompatible implicit declaration of > built-in function 'strdup' > ../../src/logging.c:175:2: warning: implicit declaration of function > 'strtok' > ../../src/logging.c:175:17: warning: assignment makes pointer from integer > without a cast > ../../src/logging.c:179:4: warning: implicit declaration of function > 'strstr' > ../../src/logging.c:179:18: warning: incompatible implicit declaration of > built-in function 'strstr' > ../../src/logging.c:205:27: warning: assignment makes pointer from integer > without a cast > ../../src/logging.c: In function '_file_output': > ../../src/logging.c:446:2: warning: implicit declaration of function > 'fprintf' > ../../src/logging.c:446:2: warning: incompatible implicit declaration of > built-in function 'fprintf' > ../../src/logging.c:447:2: warning: implicit declaration of function > 'fflush' > ../../src/logging.c: In function 'log_target_create_file': > ../../src/logging.c:520:2: warning: implicit declaration of function > 'fopen' > ../../src/logging.c:520:23: warning: assignment makes pointer from integer > without a cast > ../../src/logging.c: In function 'log_target_find': > ../../src/logging.c:544:4: warning: implicit declaration of function > 'strcmp' > ../../src/logging.c: In function 'log_target_destroy': > ../../src/logging.c:566:4: warning: implicit declaration of function > 'fclose' > ../../src/logging.c: In function 'log_target_file_reopen': > ../../src/logging.c:579:23: warning: assignment makes pointer from integer > without a cast > CC logging_syslog.lo > CC rate_ctr.lo > ../../src/rate_ctr.c: In function 'rate_ctr_get_group_by_name_idx': > ../../src/rate_ctr.c:153:3: warning: implicit declaration of function > 'strcmp' > CC gsmtap_util.lo > CC crc16.lo > CC panic.lo > CC backtrace.lo > CC conv.lo > CC application.lo > CC rbtree.lo > CC crc8gen.lo > CC crc16gen.lo > CC crc32gen.lo > CC crc64gen.lo > CCLD libosmocore.la > make[4]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src' > Making all in src/vty > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/vty' > Making all in src/codec > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' > CC gsm610.lo > CC gsm620.lo > CC gsm660.lo > CC gsm690.lo > CCLD libosmocodec.la > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/codec' > Making all in src/gsm > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' > CC a5.lo > CC rxlev_stat.lo > CC tlv_parser.lo > CC comp128.lo > CC gsm_utils.lo > CC rsl.lo > CC gsm48.lo > ../../../src/gsm/gsm48.c: In function 'gsm48_mi_to_string': > ../../../src/gsm/gsm48.c:369:4: warning: format '%u' expects type 'unsigned > int', but argument 4 has type 'uint32_t' > CC gsm48_ie.lo > CC gsm0808.lo > CC sysinfo.lo > CC gprs_cipher_core.lo > CC gsm0480.lo > CC abis_nm.lo > CC gsm0502.lo > CC gsm0411_utils.lo > ../../../src/gsm/gsm0411_utils.c: In function 'gsm340_gen_scts': > ../../../src/gsm/gsm0411_utils.c:87:2: warning: #warning find a portable > way to obtain timezone offset > CC gsm0411_smc.lo > CC gsm0411_smr.lo > CC lapd_core.lo > ../../../src/gsm/lapd_core.c: In function 'lapd_rx_u': > ../../../src/gsm/lapd_core.c:834:5: warning: implicit declaration of > function 'memcmp' > CC lapdm.lo > CC auth_core.lo > CC auth_comp128v1.lo > CC auth_milenage.lo > CC aes-encblock.lo > CC aes-internal.lo > CC aes-internal-enc.lo > CC milenage.lo > ../../../src/gsm/milenage/milenage.c: In function 'milenage_auts': > ../../../src/gsm/milenage/milenage.c:226:6: warning: implicit declaration > of function 'memcmp' > CC gan.lo > CCLD libosmogsm.la > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gsm' > Making all in src/gb > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/src/gb' > Making all in tests > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/tests' > Making all in utils > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' > make[3]: Nothing to be done for `all'. > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target/utils' > make[3]: Entering directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make[3]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make[2]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make[1]: Leaving directory > `/opt/osmocom-bb/src/shared/libosmocore/build-target' > make -C host/layer23 > make[1]: Entering directory `/opt/osmocom-bb/src/host/layer23' > Making all in include > make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' > Making all in osmocom > make[3]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > Making all in bb > make[4]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > Making all in common > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' > make[5]: Nothing to be done for `all'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/common' > Making all in misc > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' > make[5]: Nothing to be done for `all'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/misc' > Making all in mobile > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' > make[5]: Nothing to be done for `all'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb/mobile' > make[5]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > make[5]: Nothing to be done for `all-am'. > make[5]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > make[4]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom/bb' > make[4]: Entering directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > make[4]: Nothing to be done for `all-am'. > make[4]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > make[3]: Leaving directory > `/opt/osmocom-bb/src/host/layer23/include/osmocom' > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/include' > make[3]: Nothing to be done for `all-am'. > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' > make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/include' > Making all in src > make[2]: Entering directory `/opt/osmocom-bb/src/host/layer23/src' > Making all in common > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/common' > CC l1ctl.o > CC l1l2_interface.o > CC sap_interface.o > CC logging.o > CC networks.o > CC sim.o > sim.c: In function ?gsm_sim_reply?: > sim.c:146:11: warning: variable ?payload? set but not used > [-Wunused-but-set-variable] > CC sysinfo.o > CC gps.o > CC l1ctl_lapdm_glue.o > AR liblayer23.a > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/common' > Making all in misc > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/misc' > CC main.o > CC app_bcch_scan.o > app_bcch_scan.c: In function ?signal_cb?: > app_bcch_scan.c:48:3: warning: implicit declaration of function ?fps_start? > [-Wimplicit-function-declaration] > app_bcch_scan.c: In function ?l23_app_init?: > app_bcch_scan.c:56:2: warning: implicit declaration of function ?fps_init? > [-Wimplicit-function-declaration] > CC bcch_scan.o > bcch_scan.c: In function ?cinfo_timer_cb?: > bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_NONE? not handled in > switch [-Wswitch] > bcch_scan.c:198:2: warning: enumeration value ?BSCAN_S_DONE? not handled in > switch [-Wswitch] > bcch_scan.c: In function ?rx_sch_info?: > bcch_scan.c:236:1: warning: no return statement in function returning > non-void [-Wreturn-type] > bcch_scan.c: In function ?bscan_sig_cb?: > bcch_scan.c:263:3: warning: enumeration value ?FPS_S_NONE? not handled in > switch [-Wswitch] > bcch_scan.c:263:3: warning: enumeration value ?FPS_S_BINFO? not handled in > switch [-Wswitch] > bcch_scan.c:241:20: warning: unused variable ?ci? [-Wunused-variable] > bcch_scan.c: At top level: > bcch_scan.c:206:12: warning: ?rx_bcch_info? defined but not used > [-Wunused-function] > bcch_scan.c:233:12: warning: ?rx_sch_info? defined but not used > [-Wunused-function] > CCLD bcch_scan > CC app_ccch_scan.o > app_ccch_scan.c: In function ?gsm48_rx_imm_ass?: > app_ccch_scan.c:203:12: warning: variable ?ma? set but not used > [-Wunused-but-set-variable] > CC rslms.o > CCLD ccch_scan > CC app_echo_test.o > CCLD echo_test > CC app_cell_log.o > CC cell_log.o > CC geo.o > CCLD cell_log > CC app_cbch_sniff.o > CCLD cbch_sniff > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/misc' > Making all in mobile > make[3]: Entering directory `/opt/osmocom-bb/src/host/layer23/src/mobile' > CC gsm322.o > gsm322.c: In function ?gsm322_search_end?: > gsm322.c:2055:30: warning: variable ?mnc? set but not used > [-Wunused-but-set-variable] > gsm322.c: In function ?gsm322_exit?: > gsm322.c:5142:7: warning: variable ?rc? set but not used > [-Wunused-but-set-variable] > CC gsm480_ss.o > gsm480_ss.c: In function ?gsm480_mmss_ind?: > gsm480_ss.c:1221:6: warning: variable ?rc? set but not used > [-Wunused-but-set-variable] > CC gsm411_sms.o > gsm411_sms.c: In function ?gsm340_rx_tpdu?: > gsm411_sms.c:228:19: warning: variable ?sms_mms? set but not used > [-Wunused-but-set-variable] > gsm411_sms.c: In function ?gsm411_rx_rp_ud?: > gsm411_sms.c:375:2: warning: format ?%li? expects argument of type ?long > int?, but argument 7 has type ?int? [-Wformat] > gsm411_sms.c: In function ?gsm411_tx_sms_submit?: > gsm411_sms.c:657:3: warning: passing argument 4 of ?gsm411_smc_init? from > incompatible pointer type [enabled by default] > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int > (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of > type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? > gsm411_sms.c:657:3: error: too many arguments to function ?gsm411_smc_init? > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here > gsm411_sms.c:659:3: error: too many arguments to function ?gsm411_smr_init? > /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here > gsm411_sms.c: In function ?gsm411_rcv_sms?: > gsm411_sms.c:911:4: warning: passing argument 4 of ?gsm411_smc_init? from > incompatible pointer type [enabled by default] > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: expected ?int > (*)(struct gsm411_smc_inst *, int, struct msgb *, int)? but argument is of > type ?int (*)(struct gsm411_smc_inst *, int, struct msgb *)? > gsm411_sms.c:911:4: error: too many arguments to function ?gsm411_smc_init? > /usr/local/include/osmocom/gsm/gsm0411_smc.h:46:6: note: declared here > gsm411_sms.c:913:4: error: too many arguments to function ?gsm411_smr_init? > /usr/local/include/osmocom/gsm/gsm0411_smr.h:27:6: note: declared here > make[3]: *** [gsm411_sms.o] Error 1 > make[3]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src/mobile' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/opt/osmocom-bb/src/host/layer23/src' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/opt/osmocom-bb/src/host/layer23' > make: *** [host/layer23/layer23] Error 2* > > > > * > * * > * * > From akibsayyed at gmail.com Tue Mar 12 12:39:41 2013 From: akibsayyed at gmail.com (Akib Sayyed) Date: Tue, 12 Mar 2013 15:39:41 +0300 Subject: Decoding SDCCH Message-ID: Dear List I am trying to decode SDCCH. but I am not able to do it properly. Here is part of burst_ind app_ccch.c code. if (rv == 0) { uint8_t chan_type, chan_ts, chan_ss; uint8_t gsmtap_chan_type; struct osmo_phsap_prim pp; /* Send to GSMTAP */ rsl_dec_chan_nr(bi->chan_nr, &chan_type, &chan_ss, &chan_ts); gsmtap_chan_type = chantype_rsl2gsmtap( chan_type, bi->flags & BI_FLG_SACCH ? 0x40 : 0x00 ); gsmtap_send(gsmtap_inst, arfcn, chan_ts, gsmtap_chan_type, chan_ss, ntohl(bi->frame_nr), bi->rx_level, bi->snr, l2, sizeof(l2) ); here l2 is 23 byte. I need to remove send it to lapdm to decode it further then will pass it to RR. Please help me in using Lapdm for decoding :) -- Akib Sayyed Matrix-Shell akibsayyed at gmail.com akibsayyed at matrixshell.com Mob:- +91-966-514-2243 -------------- next part -------------- An HTML attachment was scrubbed... URL: From alishageri1 at gmail.com Wed Mar 13 16:15:18 2013 From: alishageri1 at gmail.com (alishageri) Date: Wed, 13 Mar 2013 09:15:18 -0700 (PDT) Subject: gsmmap work good but .. Message-ID: <1363191318103-4025917.post@n3.nabble.com> helow every body here i am from saudia arabia and nice to meet you in this forum i have problem when i compile the tool that writen in wiki i dont konw what is the resone but i fllow all the step that in wiki and when i run gsmmap it work good and it scan the all network and do ccch_scan and cell_scan becouse it is compile correctlly but gsmmap dose not have wireshark and vty of bsc that mean it is not work if any body can make gsmma work with wireshark and osmo-bts transcerver of sylan manout or ann body can make osmocom with all tool and app work as iso like gsmmap thank you for your timing -- View this message in context: http://baseband-devel.722152.n3.nabble.com/gsmmap-work-good-but-tp4025917.html Sent from the baseband-devel mailing list archive at Nabble.com. From choukoumoun at gmail.com Thu Mar 14 11:30:28 2013 From: choukoumoun at gmail.com (choukoumoun) Date: Thu, 14 Mar 2013 12:30:28 +0100 Subject: About SysmoBTS/ sysmoBSC Message-ID: <5141B4D4.7070601@gmail.com> Hello, The SysmoBTS and SysmoBSC is Open Hardware ? From choukoumoun at gmail.com Thu Mar 14 12:45:08 2013 From: choukoumoun at gmail.com (choukoumoun) Date: Thu, 14 Mar 2013 13:45:08 +0100 Subject: About SysmoBTS/ sysmoBSC In-Reply-To: References: <5141B4D4.7070601@gmail.com> Message-ID: <5141C654.6020607@gmail.com> you're right, sorry Le 14/03/2013 13:43, Andrew Back a ?crit : > > > On 14 Mar 2013 12:34, "choukoumoun" > wrote: > > > > Hello, > > > > The SysmoBTS and SysmoBSC is Open Hardware ? > > Wrong list to ask questions about BTS/BSC, and questions about > commercial products are best directed to the vendor. > > Regards, > > Andrew > -------------- next part -------------- An HTML attachment was scrubbed... URL: From holger at freyther.de Thu Mar 14 13:15:26 2013 From: holger at freyther.de (Holger Hans Peter Freyther) Date: Thu, 14 Mar 2013 14:15:26 +0100 Subject: About SysmoBTS/ sysmoBSC In-Reply-To: <5141B4D4.7070601@gmail.com> References: <5141B4D4.7070601@gmail.com> Message-ID: <20130314131526.GY17148@xiaoyu.lan> On Thu, Mar 14, 2013 at 12:30:28PM +0100, choukoumoun wrote: > The SysmoBTS and SysmoBSC is Open Hardware ? no. From choukoumoun at gmail.com Thu Mar 14 12:22:44 2013 From: choukoumoun at gmail.com (choukoumoun) Date: Thu, 14 Mar 2013 13:22:44 +0100 Subject: HNBAP protocol Message-ID: <5141C114.9010203@gmail.com> Hello, Is there a project, project start, see an idea about the protocol HNBAP example mount a HNB-GW in opensource. if it is already past the list forgive me thank you. From alishageri1 at gmail.com Sun Mar 17 11:56:08 2013 From: alishageri1 at gmail.com (alishageri) Date: Sun, 17 Mar 2013 04:56:08 -0700 (PDT) Subject: PROBLEM WHEN INSTALL LIPO-OSMO-DSP Message-ID: <1363521368326-4025924.post@n3.nabble.com> WHEN I GIT LIPO-OSMO-DSP AND TYPE IN TERMENAL MAKE O HAVE PROBLE THAT SAY MAKE *** NO TARGET SPESIFIC AND NO MAKEFILE FOUND . STOP CAN ANY BODY TELL ME WHAT IS THE WRONG -- View this message in context: http://baseband-devel.722152.n3.nabble.com/PROBLEM-WHEN-INSTALL-LIPO-OSMO-DSP-tp4025924.html Sent from the baseband-devel mailing list archive at Nabble.com. From holger at freyther.de Sun Mar 17 12:43:17 2013 From: holger at freyther.de (Holger Hans Peter Freyther) Date: Sun, 17 Mar 2013 13:43:17 +0100 Subject: PROBLEM WHEN INSTALL LIPO-OSMO-DSP In-Reply-To: <1363521368326-4025924.post@n3.nabble.com> References: <1363521368326-4025924.post@n3.nabble.com> Message-ID: <20130317124317.GJ29226@xiaoyu.lan> On Sun, Mar 17, 2013 at 04:56:08AM -0700, alishageri wrote: Good Morning, please see our mailing list rules[1]. > WHEN I GIT LIPO-OSMO-DSP > AND TYPE IN TERMENAL MAKE > O HAVE PROBLE THAT SAY > MAKE *** NO TARGET SPESIFIC AND NO MAKEFILE FOUND . STOP > CAN ANY BODY TELL ME WHAT IS THE WRONG Which guide are you following? Why do you need libosmo-dsp? Please use less caps and be more verbose. thanks holger [1] http://openbsc.osmocom.org/trac/wiki/MailingListRules From alishageri1 at gmail.com Sun Mar 17 13:27:47 2013 From: alishageri1 at gmail.com (alishageri) Date: Sun, 17 Mar 2013 06:27:47 -0700 (PDT) Subject: PROBLEM WHEN INSTALL LIPO-OSMO-DSP In-Reply-To: <20130317124317.GJ29226@xiaoyu.lan> References: <1363521368326-4025924.post@n3.nabble.com> <20130317124317.GJ29226@xiaoyu.lan> Message-ID: <1363526867054-4025926.post@n3.nabble.com> what i mean when i flow the wiki of http://bb.osmocom.org/trac/wiki/Software/Transceiver cd libosmo-dsp/ autoreconf -i ./configure make sudo make install cd .. i have proble here when i do make it say no target specifed and no makefile found i hope you understand the issue thank you -- View this message in context: http://baseband-devel.722152.n3.nabble.com/PROBLEM-WHEN-INSTALL-LIPO-OSMO-DSP-tp4025924p4025926.html Sent from the baseband-devel mailing list archive at Nabble.com. From holger at freyther.de Sun Mar 17 14:16:21 2013 From: holger at freyther.de (Holger Hans Peter Freyther) Date: Sun, 17 Mar 2013 15:16:21 +0100 Subject: PROBLEM WHEN INSTALL LIPO-OSMO-DSP In-Reply-To: <1363526867054-4025926.post@n3.nabble.com> References: <1363521368326-4025924.post@n3.nabble.com> <20130317124317.GJ29226@xiaoyu.lan> <1363526867054-4025926.post@n3.nabble.com> Message-ID: <20130317141621.GK29226@xiaoyu.lan> On Sun, Mar 17, 2013 at 06:27:47AM -0700, alishageri wrote: > what i mean when i flow the wiki of > http://bb.osmocom.org/trac/wiki/Software/Transceiver > cd libosmo-dsp/ > autoreconf -i > ./configure > i have proble here when i do make > it say no target specifed and no makefile found i hope you understand the > issue make fails.. because any of the commands fail. And no, do not paste the output of these utilities. We have build testing of libosmo-dsp and we know that it is building. Read the output generated by the above commands, then think of why it is failing, use your favorite search engine to find a solution. cheers holger From alishageri1 at gmail.com Sun Mar 17 19:11:53 2013 From: alishageri1 at gmail.com (alishageri) Date: Sun, 17 Mar 2013 12:11:53 -0700 (PDT) Subject: PROBLEM WHEN INSTALL LIPO-OSMO-DSP In-Reply-To: <20130317141621.GK29226@xiaoyu.lan> References: <1363521368326-4025924.post@n3.nabble.com> <20130317124317.GJ29226@xiaoyu.lan> <1363526867054-4025926.post@n3.nabble.com> <20130317141621.GK29226@xiaoyu.lan> Message-ID: <1363547513301-4025928.post@n3.nabble.com> thank you brother now is is compile corecttly what i need now is the command for load osmo-dsp from osmocom-bb/src/>>>> what i put here to load the firmware thank you -- View this message in context: http://baseband-devel.722152.n3.nabble.com/PROBLEM-WHEN-INSTALL-LIPO-OSMO-DSP-tp4025924p4025928.html Sent from the baseband-devel mailing list archive at Nabble.com. From mailman at lists.osmocom.org Sun Mar 17 12:06:52 2013 From: mailman at lists.osmocom.org (mailman at lists.osmocom.org) Date: Sun, 17 Mar 2013 13:06:52 +0100 Subject: Bounce action notification Message-ID: This is a Mailman mailing list bounce action notice: List: baseband-devel Member: alex.id at vmail.me Action: Subscription disabled. Reason: Excessive or fatal bounces. The triggering bounce notice is attached below. Questions? Contact the Mailman site administrator at mailman at lists.osmocom.org. -------------- next part -------------- An embedded message was scrubbed... From: Mail Delivery System Subject: Mail delivery failed: returning message to sender Date: Sun, 17 Mar 2013 12:54:26 +0100 Size: 42492 URL: From niceguy108 at gmail.com Wed Mar 20 15:37:40 2013 From: niceguy108 at gmail.com (Bhaskar11) Date: Wed, 20 Mar 2013 21:07:40 +0530 Subject: Sharp drop in SNR during TCH Message-ID: Dear Sylvain, I'm studying traffic data using ccch_scan in burstind branch. In prim_sniff.c I track the SNR levels in l1s_sniff_resp() using code from print_tch.c to read snr values from: dsp_api.db_r->a_serv_demod[D_SNR]; I find that the level changes sharply from ccch mode to tch mode. In ccch mode most of the snr values are 16384. After switching to tch mode they range from 200 to 600 typically! Is this normal? Am I doing something wrong when changing mode? Below is the dump of snr values and freq_err during the run. B. =============== data dump fnx = fn % 26; freq_err = ANGLE_TO_FREQ(dsp_api.db_r->a_serv_demod[D_ANGLE]); snr = dsp_api.db_r->a_serv_demod[D_SNR]; fnx=6, bidx=0, freq_err=-24, snr=16384. SACCH fnx=7, bidx=0, freq_err=-6, snr=16384. SACCH fnx=8, bidx=0, freq_err=9, snr=16384. SACCH fnx=9, bidx=0, freq_err=-15, snr=16384. SACCH fnx=25, bidx=0, freq_err=-26, snr=16384. fnx=0, bidx=0, freq_err=10, snr=16384. fnx=1, bidx=0, freq_err=38, snr=16384. fnx=2, bidx=0, freq_err=-14, snr=*16384*. fnx=24, bidx=0, freq_err=46, snr=*16384*. fnx=25, bidx=0, freq_err=23, snr=*16384*. fnx=0, bidx=0, freq_err=-1, snr=*16384*. afc_correct(error=-1Hz, arfcn=24): delta=0, afc_dac(old=544,new=544) fnx=1, bidx=0, freq_err=22, snr=16384. *(Immediate Assignment starts here)* L1CTL_FBSB_REQ (arfcn=4, flags=0x7) Starting FCCH RecognitionFB0 (1266881:8): TOA= 8784, Power= -61dBm, Angle=10831Hz afc_correct(error=10831Hz, arfcn=4): delta=1283, afc_dac(old=-700,new=583) FB0 (1266892:9): TOA=10032, Power= -61dBm, Angle= -340Hz afc_correct(error=-340Hz, arfcn=4): delta=-40, afc_dac(old=583,new=543) FB1 (1266902:8): TOA= 8755, Power= -61dBm, Angle= 0Hz afc_correct(error=0Hz, arfcn=4): delta=0, afc_dac(old=543,new=543) fn_offset=1266900 (fn=1266902 + attempt=8 + ntdma = 6) delay=8 (fn_offset=1266900 + 11 - fn=1266902 - 1 scheduling next FB/SB detection task with delay 8 =>FB @ FNR 1266900 fn_offset=1266900 qbits=4836 Synchronize_TDMA LOST 3717! SB1 (2533807:1): TOA= 26, Power= -61dBm, Angle= 176Hz => SB 0x00a9dd65: BSIC=25 fn=1266912(955/10/21)=> DSP reports SB in bit that is 1127709799 bits in the future?!? Synchronize_TDMA => DSP reports FB in bit that is 1127709776 bits in the future?!? LOST 1907! afc_correct(error=4Hz, arfcn=4): delta=0, afc_dac(old=543,new=543) L1CTL_DM_EST_REQ (arfcn=12545, chan_nr=0x15, tsc=1) LOST 3047! *(tch mode is now active)* fnx=4, bidx=0, freq_err=-92, snr=*238*. fnx=6, bidx=0, freq_err=-132, snr=*82*. fnx=8, bidx=0, freq_err=103, snr=*145*. fnx=10, bidx=0, freq_err=-234, snr=*316*. fnx=12, bidx=0, freq_err=-89, snr=*292*. SACCH fnx=13, bidx=0, freq_err=46, snr=*270*. fnx=15, bidx=0, freq_err=35, snr=*387*. fnx=17, bidx=0, freq_err=201, snr=*1055*. fnx=19, bidx=0, freq_err=130, snr=549. fnx=21, bidx=0, freq_err=-94, snr=51. fnx=23, bidx=0, freq_err=-52, snr=173. fnx=0, bidx=0, freq_err=157, snr=322. fnx=2, bidx=0, freq_err=107, snr=95. afc_correct(error=12Hz, arfcn=24): delta=1, afc_dac(old=543,new=544) fnx=4, bidx=0, freq_err=86, snr=135. fnx=6, bidx=0, freq_err=-126, snr=207. ==================================== -------------- next part -------------- An HTML attachment was scrubbed... URL: From niceguy108 at gmail.com Wed Mar 20 16:06:22 2013 From: niceguy108 at gmail.com (Bhaskar11) Date: Wed, 20 Mar 2013 21:36:22 +0530 Subject: Sharp drop in SNR during TCH In-Reply-To: References: Message-ID: I checked the SNR value from: sp->bursts[bidx].snr This is quite different from: dsp_api.db_r->a_serv_demod[D_SNR] The dump of the two values is below: freq_err=97, snr=216. bsnr=104. freq_err=-7, snr=183. bsnr=247. freq_err=19, snr=405. bsnr=16384. freq_err=-10, snr=189. bsnr=16384. freq_err=-163, snr=318. bsnr=16384. freq_err=-27, snr=470. bsnr=16384. freq_err=-23, snr=483. bsnr=16384. freq_err=99, snr=660. bsnr=16384. freq_err=-64, snr=1752. bsnr=16384. SACCH freq_err=-10, snr=476. bsnr=16384. freq_err=-206, snr=476. bsnr=16384. freq_err=-34, snr=326. bsnr=123. freq_err=-256, snr=217. bsnr=250. freq_err=-81, snr=181. bsnr=16384. freq_err=-190, snr=245. bsnr=16384. freq_err=-98, snr=113. bsnr=16384. What is causing the difference in TCH? B. On Wed, Mar 20, 2013 at 9:07 PM, Bhaskar11 wrote: > Dear Sylvain, > > I'm studying traffic data using ccch_scan in burstind branch. > > In prim_sniff.c I track the SNR levels in l1s_sniff_resp() using code from > print_tch.c to read snr values from: dsp_api.db_r->a_serv_demod[D_SNR]; > > I find that the level changes sharply from ccch mode to tch mode. > > In ccch mode most of the snr values are 16384. After switching to tch mode > they range from 200 to 600 typically! > > Is this normal? Am I doing something wrong when changing mode? > > Below is the dump of snr values and freq_err during the run. > > B. > > =============== data dump > fnx = fn % 26; > freq_err = ANGLE_TO_FREQ(dsp_api.db_r->a_serv_demod[D_ANGLE]); > snr = dsp_api.db_r->a_serv_demod[D_SNR]; > > > fnx=6, bidx=0, freq_err=-24, snr=16384. SACCH > fnx=7, bidx=0, freq_err=-6, snr=16384. SACCH > fnx=8, bidx=0, freq_err=9, snr=16384. SACCH > fnx=9, bidx=0, freq_err=-15, snr=16384. SACCH > fnx=25, bidx=0, freq_err=-26, snr=16384. > fnx=0, bidx=0, freq_err=10, snr=16384. > fnx=1, bidx=0, freq_err=38, snr=16384. > fnx=2, bidx=0, freq_err=-14, snr=*16384*. > fnx=24, bidx=0, freq_err=46, snr=*16384*. > fnx=25, bidx=0, freq_err=23, snr=*16384*. > fnx=0, bidx=0, freq_err=-1, snr=*16384*. > afc_correct(error=-1Hz, arfcn=24): delta=0, afc_dac(old=544,new=544) > fnx=1, bidx=0, freq_err=22, snr=16384. > *(Immediate Assignment starts here)* > L1CTL_FBSB_REQ (arfcn=4, flags=0x7) > Starting FCCH RecognitionFB0 (1266881:8): TOA= 8784, Power= -61dBm, > Angle=10831Hz > afc_correct(error=10831Hz, arfcn=4): delta=1283, afc_dac(old=-700,new=583) > FB0 (1266892:9): TOA=10032, Power= -61dBm, Angle= -340Hz > afc_correct(error=-340Hz, arfcn=4): delta=-40, afc_dac(old=583,new=543) > FB1 (1266902:8): TOA= 8755, Power= -61dBm, Angle= 0Hz > afc_correct(error=0Hz, arfcn=4): delta=0, afc_dac(old=543,new=543) > fn_offset=1266900 (fn=1266902 + attempt=8 + ntdma = 6) > delay=8 (fn_offset=1266900 + 11 - fn=1266902 - 1 > scheduling next FB/SB detection task with delay 8 > =>FB @ FNR 1266900 fn_offset=1266900 qbits=4836 > Synchronize_TDMA > LOST 3717! > SB1 (2533807:1): TOA= 26, Power= -61dBm, Angle= 176Hz > => SB 0x00a9dd65: BSIC=25 fn=1266912(955/10/21)=> DSP reports SB in bit > that is 1127709799 bits in the future?!? > Synchronize_TDMA > => DSP reports FB in bit that is 1127709776 bits in the future?!? > LOST 1907! > afc_correct(error=4Hz, arfcn=4): delta=0, afc_dac(old=543,new=543) > L1CTL_DM_EST_REQ (arfcn=12545, chan_nr=0x15, tsc=1) > LOST 3047! > *(tch mode is now active)* > fnx=4, bidx=0, freq_err=-92, snr=*238*. > fnx=6, bidx=0, freq_err=-132, snr=*82*. > fnx=8, bidx=0, freq_err=103, snr=*145*. > fnx=10, bidx=0, freq_err=-234, snr=*316*. > fnx=12, bidx=0, freq_err=-89, snr=*292*. SACCH > fnx=13, bidx=0, freq_err=46, snr=*270*. > fnx=15, bidx=0, freq_err=35, snr=*387*. > fnx=17, bidx=0, freq_err=201, snr=*1055*. > fnx=19, bidx=0, freq_err=130, snr=549. > fnx=21, bidx=0, freq_err=-94, snr=51. > fnx=23, bidx=0, freq_err=-52, snr=173. > fnx=0, bidx=0, freq_err=157, snr=322. > fnx=2, bidx=0, freq_err=107, snr=95. > afc_correct(error=12Hz, arfcn=24): delta=1, afc_dac(old=543,new=544) > fnx=4, bidx=0, freq_err=86, snr=135. > fnx=6, bidx=0, freq_err=-126, snr=207. > > ==================================== > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From 246tnt at gmail.com Wed Mar 20 16:13:49 2013 From: 246tnt at gmail.com (Sylvain Munaut) Date: Wed, 20 Mar 2013 17:13:49 +0100 Subject: Sharp drop in SNR during TCH In-Reply-To: References: Message-ID: > Is this normal? No. > Am I doing something wrong when changing mode? Either you're doing something wrong or there is just nothing on that channel. TCH has DTX meaning if there is no active transmission, nothing is transmitted and that results in low SNR. Cheers, Sylvain From mehrinjaved at gmail.com Thu Mar 21 12:25:27 2013 From: mehrinjaved at gmail.com (Mehrin Javed) Date: Thu, 21 Mar 2013 17:25:27 +0500 Subject: Not able to see measurement reports in wireshark Message-ID: Dear all, I have successfully made a call from the master branch of Osmocom-bb . After integrating it to wireshark, I am able to see system information 5 and 6 but I am unable to see the measurement reports and voice traffic. Following is what i am able to see when i execute the mobile application . There are valid measurement reports being generated , but why cant i view them in wireshark.? Looking forwards to your response as soon as possible. [0;m<0005> gsm48_mm.c:3911 (ms 1) Received 'RR_DATA_IND' from RR in state MM connection active (sapi 0) <0006> gsm48_cc.c:2161 (ms 1) Received 'MMCC_DATA_IND' in CC state MO_CALL_PROC <0006> gsm48_cc.c:2115 (ms 1) Received 'ALERTING' in CC state MO_CALL_PROC <0006> gsm48_cc.c:717 received ALERTING <0006> gsm48_cc.c:243 new state MO_CALL_PROC -> CALL_DELIVERED <0006> gsm48_cc.c:196 (ms 1 ti 0) Sending 'MNCC_ALERT_IND' to MNCC. <0009> mnccms.c:387 Call is alerting <0001> gsm48_rr.c:662 MON: f=57 lev=-75 snr=62 ber=151 LAI=410 03 e165 ID=9463 TA=0 pwr=10 TS=1 <0001> gsm48_rr.c:2864 MEAS REP: pwr=10 TA=0 meas-invalid=0 rxlev-full=-75 rxlev-sub=-75 rxqual-full=0 rxqual-sub=0 dtx 0 ba 0 no-ncell-n 0 <0001> gsm48_rr.c:4767 Indicated ta 0 (actual ta 0) <0001> gsm48_rr.c:4769 Indicated tx_power 10 <0001> gsm48_rr.c:4767 Indicated ta 0 (actual ta 0) <0001> gsm48_rr.c:4769 Indicated tx_power 10 <0001> gsm48_rr.c:662 MON: f=57 lev=-70 snr=49 ber= 81 LAI=410 03 e165 ID=9463 TA=0 pwr=10 TS=1 <0001> gsm48_rr.c:2864 MEAS REP: pwr=10 TA=0 meas-invalid=0 rxlev-full=-70 rxlev-sub=-70 rxqual-full=0 rxqual-sub=0 dtx 0 ba 0 no-ncell-n 0 <0001> gsm48_rr.c:4767 Indicated ta 0 (actual ta 0) <0001> gsm48_rr.c:4769 Indicated tx_power 14 Thanks and Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: From dftc2000 at yopmail.com Fri Mar 22 16:16:41 2013 From: dftc2000 at yopmail.com (DFTC2000) Date: Fri, 22 Mar 2013 09:16:41 -0700 (PDT) Subject: A -very old- Sagem Trace Phone Message-ID: <1363969001590-4025938.post@n3.nabble.com> Hi everyone, I'm looking for informations about this very old trace phone. (Power adaptor spec, band type ...) Thanks a lot for your help (I can take some other pics if you want) BR. Dan, France -- View this message in context: http://baseband-devel.722152.n3.nabble.com/A-very-old-Sagem-Trace-Phone-tp4025938.html Sent from the baseband-devel mailing list archive at Nabble.com. From rafarevertf22 at gmail.com Sat Mar 23 03:17:45 2013 From: rafarevertf22 at gmail.com (R. Revert) Date: Fri, 22 Mar 2013 22:17:45 -0500 Subject: Osmocom web Site Down Message-ID: *Hi * *every one, from the 20th of this mounth the web site as some problems , i will like to help if you guy's if maibe osmocom projects need's servers to host the website or anythink else, than i can help whit somo IT resources..* * * *please let me know.* * * *Thanks #__________________ Atte. **Rafael R.* *Security Information Architect * *CEH, CHFI, **ECSA, LPT, VCP5, CEI, VCI* -------------- next part -------------- An HTML attachment was scrubbed... URL: From peter at stuge.se Sat Mar 23 08:11:10 2013 From: peter at stuge.se (Peter Stuge) Date: Sat, 23 Mar 2013 09:11:10 +0100 Subject: Osmocom web Site Down In-Reply-To: References: Message-ID: <20130323081110.1869.qmail@stuge.se> Hi, R. Revert wrote: > the web site as some problems Yes, there was an unplanned outage caused by hardware failure. There was already intent to migrate services to more powerful hardware, and this is being done now. Since the migration wasn't really planned at this time it might take a little while to restore everything though. http://git.osmocom.org/ works already, although all repositories may not be completely up to date just yet. > will like to help if you guy's if maibe osmocom projects need's servers Thanks for the offer! Someone will contact you about resources if there is a need for something further, but I have the impression that there are enough resources at the moment. Thanks //Peter From laforge at gnumonks.org Fri Mar 29 15:40:48 2013 From: laforge at gnumonks.org (Harald Welte) Date: Fri, 29 Mar 2013 16:40:48 +0100 Subject: NEWSDR'13 Workshop / OpenBSC / OsmocomBB Message-ID: <20130329154048.GR11570@prithivi.gnumonks.org> Hi All, as I've just been made aware of by a business contact, there is a NEWSDR'13 workshop which, among other things, has OsmocomBB and OpenBSC on the list of topics: http://ecewp.ece.wpi.edu/wordpress/sdr-boston/newsdr-13/call-for-papers/ Did anyone ever hear of this workshop? Did the organizers ever make contact with us? I'm a bit surprised that somebody organizes a workshop with "our" projects on the agenda without even sending the CfP to us. Or maybe I just missed it? In case somebody is submitting a paper there: Please make sure to coordinate here in order to avoid different developers/contributors from submitting similar/related topics. Regards, Harald -- - Harald Welte http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6) From kheimerl at cs.berkeley.edu Fri Mar 29 18:00:21 2013 From: kheimerl at cs.berkeley.edu (Kurtis Heimerl) Date: Sat, 30 Mar 2013 03:00:21 +0900 Subject: NEWSDR'13 Workshop / OpenBSC / OsmocomBB In-Reply-To: <20130329154048.GR11570@prithivi.gnumonks.org> References: <20130329154048.GR11570@prithivi.gnumonks.org> Message-ID: We're (OpenBTS) on it as well. They didn't contact us either. I don't think this is a big deal, it's a small workshop and they're just fishing for stuff that points to the type work they want submitted. It's not binding and it doesn't mean there's a session or even an agenda. I bet this happens all the time, and this is just the first one we've had forwarded. On Sat, Mar 30, 2013 at 12:40 AM, Harald Welte wrote: > Hi All, > > as I've just been made aware of by a business contact, there is a > NEWSDR'13 workshop which, among other things, has OsmocomBB and OpenBSC > on the list of topics: > > http://ecewp.ece.wpi.edu/wordpress/sdr-boston/newsdr-13/call-for-papers/ > > Did anyone ever hear of this workshop? Did the organizers ever make > contact with us? I'm a bit surprised that somebody organizes a workshop > with "our" projects on the agenda without even sending the CfP to us. > Or maybe I just missed it? > > In case somebody is submitting a paper there: Please make sure to > coordinate here in order to avoid different developers/contributors from > submitting similar/related topics. > > Regards, > Harald > > -- > - Harald Welte > http://laforge.gnumonks.org/ > > ============================================================================ > "Privacy in residential applications is a desirable marketing option." > (ETSI EN 300 175-7 Ch. > A6) > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tmjerry04 at gmail.com Sun Mar 31 09:22:37 2013 From: tmjerry04 at gmail.com (tom jerry) Date: Sun, 31 Mar 2013 12:22:37 +0300 Subject: osmocon via uart Message-ID: i have a motorola c118 and running osmocon in raspberry. Am using the uart available in gpio pins. What are the ideal settings in terms of baud rate to allow communication,as i can't get hello world working.the cable is ok since when i short tx and rx,and use minicom whatever i type on the keyboard appears on minicom. Thanks