Osmocom Transceiver (was: Osmovom-BB on Raspberry Pi)

Dario Lombardo dario.lombardo.ml at gmail.com
Mon Feb 25 14:28:33 UTC 2013


L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=36, flags=0x7)
Starting FCCH RecognitionFB0 (3164:6): TOA= 6672, Power= -83dBm, Angle=  644Hz
FB1 (3174:8): TOA= 9151, Power= -83dBm, Angle=  180Hz
  fn_offset=3173 (fn=3174 + attempt=8 + ntdma = 7)
  delay=9 (fn_offset=3173 + 11 - fn=3174 - 1
  scheduling next FB/SB detection task with delay 9
=>FB @ FNR 3173 fn_offset=3173 qbits=1420
Synchronize_TDMA
LOST 2436!
SB2 (6353:2): TOA=   23, Power= -83dBm, Angle=  167Hz
=> SB 0x009ce14a: BSIC=18 fn=1956871(1475/ 7/ 1) qbits=0
Synchronize_TDMA
=>FB @ FNR 6351 fn_offset=1956870 qbits=4908
LOST 1903!

Apart from that, only battery indications are shown.

On Mon, Feb 25, 2013 at 3:03 PM, Sylvain Munaut <246tnt at gmail.com> wrote:
>> This is what happens when using original motorola fw (logs from
>> openbts, cut where reported)
>
> And the osmocon logs ?
>
>
> Cheers,
>
>     Sylvain




More information about the baseband-devel mailing list