This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Nathan Fain nat at fains.comfirst build, grabbed repository today. ran into some issues running make from src. ERROR 1 (snippits): cd host/layer23 && autoreconf -i cd host/layer23 && LIBOSMOCORE_LIBS=/osmocom-bb/src/shared/libosmocore/build-host/src/.libs/libosmocore.a LIBOSMOCORE_CFLAGS=-I/osmocom-bb/src/shared/libosmocore/include ./configure ./configure: line 3361: syntax error near unexpected token `LIBOSMOCORE,' ./configure: line 3461: `PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore)' SOLUTION: i do have pkg-config installed, as well as aclocal 1.10. Commenting out line 3461 continues. Perhaps the errors that happen thereafter are a result of this. ERROR 2: cd host/osmocon && autoreconf -i cd host/osmocon && LIBOSMOCORE_LIBS=/osmocom-bb/src/shared/libosmocore/build-host/src/.libs/libosmocore.a LIBOSMOCORE_CFLAGS=-I/osmocom-bb/src/shared/libosmocore/include ./configure ./configure: line 3364: syntax error near unexpected token `LIBOSMOCORE,' ./configure: line 3364: `PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore)' SOLUTION: same ERROR 3: arm-elf-ld -nostartfiles -nostdlib -nodefaultlibs --gc-sections -T board/common/compal_ramload.lds -Bstatic -Map board/compal_e88/hello_world.map -o board/compal_e88/hello_world.elf --start-group apps/hello_world/main.o board/common/compal_ramload_start.o abb/twl3025.o rf/trf6151.o display/font_r8x8.o display/font_r8x8_horiz.o display/st7558.o display/ssd1783.o display/display.o flash/cfi_flash.o calypso/libcalypso.a layer1/liblayer1.a lib/libmini.a comm/libcomm.a ../../shared/libosmocore/build-target/src/.libs/libosmocore.a board/common/rffe_compal_dualband.o board/compal_e88/init.o board/compal_e88/board.o --end-group calypso/libcalypso.a: could not read symbols: Archive has no index; run ranlib to add one make[1]: *** [board/compal_e88/hello_world.elf] Error 1 make: *** [firmware] Error 2 $ cd target/firmware/calypso/ $ ranlib libcalypso.a ranlib: warning for library: libcalypso.a the table of contents is empty (no object file members in the library define global symbols) Any clues? thanks -- cyphunk://cypherpoet.com nathan://squimp.com fain://deadhacker.com