-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Hi all,
we are currently experiencing some issues with OpenBSC paired with a
sysmobts-2050. SDCCH channels are getting stick into BROKEN/UNUSABLE
state, and they don't get released. This accumulates over time and
reaches a point where we have to manually restart osmo-nitb because
there are no channels availables and the whole network breaks down.
Is it a know issue or only us? :)
This is the "show lchan" output:
BTS 0, TRX 0, Timeslot 0, Lchan 0: Type SDCCH
Connection: 0, State: BROKEN UNUSABLE
BS Power: 37 dBm, MS Power: 39 dBm
No Subscriber
Bound IP: 0.0.0.0 Port 0 RTP_TYPE2=0 CONN_ID=0
Measurement Report:
Flags: DLinval
RXL-FULL-ul: -87 dBm, RXL-SUB-ul: -47 dBm RXQ-FULL-ul: 0,
RXQ-SUB-ul: 0
BTS 1, TRX 0, Timeslot 0, Lchan 2: Type NONE
Connection: 0, State: BROKEN UNUSABLE
BS Power: 37 dBm, MS Power: 39 dBm
No Subscriber
Bound IP: 0.0.0.0 Port 0 RTP_TYPE2=0 CONN_ID=0
Measurement Report:
Flags: DLinval
RXL-FULL-ul: -110 dBm, RXL-SUB-ul: -110 dBm RXQ-FULL-ul: 0,
RXQ-SUB-ul: 0
BTS 1, TRX 0, Timeslot 0, Lchan 3: Type NONE
Connection: 0, State: BROKEN UNUSABLE
BS Power: 37 dBm, MS Power: 39 dBm
No Subscriber
Bound IP: 0.0.0.0 Port 0 RTP_TYPE2=0 CONN_ID=0
Measurement Report:
Flags: DLinval
RXL-FULL-ul: -110 dBm, RXL-SUB-ul: -110 dBm RXQ-FULL-ul: 0,
RXQ-SUB-ul: 0
Timeslot 0 is configured as CCCH+SDCCH4.
Cheers
Ciaby
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird -
http://www.enigmail.net/
iF4EAREKAAYFAlL0A7MACgkQC30ZhxNccpEr7QD/WugVMQo5LW1u2RVNeK6TL6Rx
hNl/h7f2UB/3lhedCTIBALcMXoglpdx/CLIo5nrZVQqoVVRCTD8Jd6UzQFtbejx+
=l7KL
-----END PGP SIGNATURE-----